For information on file sharing, see Enabling file sharing.
• |
See the Technical Specifications available on the product documentation page: https://support.quest.com/kace-systems-management-appliance/technical-documents. |
To configure User Account Control (UAC), do one of the following:
◦ |
Set User Account Control: Run all administrators in Admin Approval Mode to Disabled. This option is recommended, because it is more secure and can be centrally configured using GPO. To find this setting, open the Group Policy (type secpol.msc into the Search programs and files field under the Start menu), then go to Local Policies > Security Options. Restart the device after applying the settings. |
◦ |
Disable UAC. On Windows 7, go to Control Panel > System and Security > Action Center > Change User Account Control Settings. On Windows 8, go to Control Panel > System and Security > Administrative Tools > Local Security Policy, then in Security Options in the Local Policies section choose Disabled for each of the items labeled User Account Control. |
On the Advanced Sharing Settings page, enable network discovery and file and printer sharing.
For provisioning Windows devices, you can also use the appliance GPO Provisioning Tool. Using the tool minimizes the pre-configuration that must happen on the target device. See Provisioning the KACE Agent using the GPO Provisioning Tool for Windows devices.
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
Select Provisioning Using IP Range (Windows, Mac, Linux) and click Next to display the Provisioning Schedule Detail page. |
3. |
4. |
The Help me pick devices link enables you to add devices to the Target IP addresses or Hostnames list:
After specifying a range, click Add All
|
Run in combination with an event rather than on a specific date or at a specific time. | |||||||||||
Every n hours |
|||||||||||
Run daily at a specified time, or run on a designated day of the week at a specified time. | |||||||||||
Run on the nth of every month/specific month at HH:MM |
Run on the same day every month, or a specific month, at the specified time. | ||||||||||
Run on the nth weekday of every month/specific month at HH:MM |
Run on the specific weekday of every month, or a specific month, at the specified time. | ||||||||||
Run according to a custom schedule. Use standard 5-field cron format (extended cron format is not supported): Use the following when specifying values:
| |||||||||||
Click to view the task schedule. The Task Schedule dialog box displays a list of scheduled tasks. Click a task to review the task details. For more information, see View task schedules. |
6. |
◦ |
Specify the WinRM port used for agent provisioning on Windows devices. For those schedules using a legacy method to provision Windows devices, you have an option to change it to WinRM. For more information about WinRM configuration, see https://support.quest.com/kb/260699/agent-provisioning-with-winrm. |
◦ |
Choose the level of information to display in the log. To see only the most important messages, select Critical. To see all messages, select Debug. Other options include Error, Warning, Notice, and Info. |
◦ |
Specify the device that you want to use as a relay for agentless device inventory. A relay device that is used during discovery as a relay is used for agentless inventory, when a new device is provisioned automatically from discovery results. For more information, see Add a Discovery Schedule to perform a quick "what and where" scan of your network. |
◦ |
Enable a complete uninstall of the Agent. Selecting Remove KUID during uninstall results in an existing Agent being removed from the device before the Agent is installed again. In this case, the appliance generates a new KUID for the asset, and it appears as a new device in the appliance. |
7. |
The Provisioning Schedules page displays the progress of the successful installations after the schedule's start time.
For information on file sharing, see Enabling file sharing.
• |
See the Technical Specifications available on the product documentation page: https://support.quest.com/kace-systems-management-appliance/technical-documents. |
To configure User Account Control (UAC), do one of the following:
◦ |
Set User Account Control: Run all administrators in Admin Approval Mode to Disabled. This option is recommended, because it is more secure and can be centrally configured using GPO. To find this setting, open the Group Policy (type secpol.msc into the Search programs and files field under the Start menu), then go to Local Policies > Security Options. Restart the device after applying the settings. |
◦ |
Disable UAC. On Windows 7, go to Control Panel > System and Security > Action Center > Change User Account Control Settings. On Windows 8, go to Control Panel > System and Security > Administrative Tools > Local Security Policy, then in Security Options in the Local Policies section choose Disabled for each of the items labeled User Account Control. |
On the Advanced Sharing Settings page, enable network discovery and file and printer sharing.
For provisioning Windows devices, you can also use the appliance GPO Provisioning Tool. Using the tool minimizes the pre-configuration that must happen on the target device. See Provisioning the KACE Agent using the GPO Provisioning Tool for Windows devices.
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
Select Provisioning Using IP Range (Windows, Mac, Linux) and click Next to display the Provisioning Schedule Detail page. |
3. |
A unique name that identifies this configuration. The name appears on the Provisioning Schedules page. | |||||||||||||
Enable provisioning schedules. Schedules run only if this check box is selected. | |||||||||||||
Install/Uninstall |
Indicates whether the provisioning schedule deals with installing or uninstalling Agents. | ||||||||||||
If you do not select an Agent token, when the Agent connects to the appliance for the first time, it remains in the quarantine list until the appliance administrator approves its connection request. For more information, see Registering KACE Agent with the appliance. | |||||||||||||
Separate rows for the credentials needed to connect to the device and run commands for the particular platform targeted by the schedule. The first column contains the operating system. The second column contains the Agent Version in place for installation. The third column contains a drop-down list from which to select existing credentials. You can select Add new credential to add credentials not already listed. |
4. |
The Help me pick devices link enables you to add devices to the Target IP addresses or Hostnames list:
After specifying a range, click Add All
|
Run in combination with an event rather than on a specific date or at a specific time. | |||||||||||
Every n hours |
|||||||||||
Run daily at a specified time, or run on a designated day of the week at a specified time. | |||||||||||
Run on the nth of every month/specific month at HH:MM |
Run on the same day every month, or a specific month, at the specified time. | ||||||||||
Run on the nth weekday of every month/specific month at HH:MM |
Run on the specific weekday of every month, or a specific month, at the specified time. | ||||||||||
Run according to a custom schedule. Use standard 5-field cron format (extended cron format is not supported): Use the following when specifying values:
| |||||||||||
Click to view the task schedule. The Task Schedule dialog box displays a list of scheduled tasks. Click a task to review the task details. For more information, see View task schedules. |
6. |
◦ |
Specify the WinRM port used for agent provisioning on Windows devices. For those schedules using a legacy method to provision Windows devices, you have an option to change it to WinRM. For more information about WinRM configuration, see https://support.quest.com/kb/260699/agent-provisioning-with-winrm. |
◦ |
Choose the level of information to display in the log. To see only the most important messages, select Critical. To see all messages, select Debug. Other options include Error, Warning, Notice, and Info. |
◦ |
Specify the device that you want to use as a relay for agentless device inventory. A relay device that is used during discovery as a relay is used for agentless inventory, when a new device is provisioned automatically from discovery results. For more information, see Add a Discovery Schedule to perform a quick "what and where" scan of your network. |
◦ |
Enable a complete uninstall of the Agent. Selecting Remove KUID during uninstall results in an existing Agent being removed from the device before the Agent is installed again. In this case, the appliance generates a new KUID for the asset, and it appears as a new device in the appliance. |
7. |
The Provisioning Schedules page displays the progress of the successful installations after the schedule's start time.
You can view provisioning schedule status and other details on the Provisioning Schedules page. From this page you can also run and edit provisioning schedules as needed.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
The name of the provisioning schedule (links to the Provisioning Schedule Detail page). | |
The total number of target devices in the configuration (links to the Provisioning Results page). | |
The total number of target devices on which provisioning is running (links to the Provisioning Results page). | |
The total number of target devices on which provisioning has not yet started (links to the Provisioning Results page). | |
The total number of target devices on which provisioning has succeeded (links to the Provisioning Results page). | |
The total number of target devices on which provisioning has failed (links to the Provisioning Results page). | |
The total number of target devices on which provisioning has succeeded as a percentage. | |
The specified provisioning schedule. For example: Everyn minutes, Every n hours, or Never. | |
b. |
b. |
b. |
In the Advanced section, click Duplicate to display the Provisioning Schedules page with the new schedule listed as Copy of Schedule Name. |
You can delete provisioning schedules when you want to remove schedules from the appliance.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
3. |
You can view the results of actions performed by provisioning schedules.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
The status of the Agent connection to the appliance: : An Agent-managed device is connected to the appliance. : An Agent-managed device is not connected to the appliance. | |
The hostname of the target device. Click the Remote Connection button to open a Remote Desktop Connection to the target device (Microsoft Edge only): | |
I indicates a successful installation. U indicates a successful uninstallation. | |
4. |
NOTE: The [computer inventory] link appears only if the provisioning process can match the MAC address of the target device with the current inventory data. See Managing MIA devices. |
You can view provisioning schedule status and other details on the Provisioning Schedules page. From this page you can also run and edit provisioning schedules as needed.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
The name of the provisioning schedule (links to the Provisioning Schedule Detail page). | |
The total number of target devices in the configuration (links to the Provisioning Results page). | |
The total number of target devices on which provisioning is running (links to the Provisioning Results page). | |
The total number of target devices on which provisioning has not yet started (links to the Provisioning Results page). | |
The total number of target devices on which provisioning has succeeded (links to the Provisioning Results page). | |
The total number of target devices on which provisioning has failed (links to the Provisioning Results page). | |
The total number of target devices on which provisioning has succeeded as a percentage. | |
The specified provisioning schedule. For example: Everyn minutes, Every n hours, or Never. | |
b. |
b. |
b. |
In the Advanced section, click Duplicate to display the Provisioning Schedules page with the new schedule listed as Copy of Schedule Name. |
You can delete provisioning schedules when you want to remove schedules from the appliance.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
3. |
You can view the results of actions performed by provisioning schedules.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
The status of the Agent connection to the appliance: : An Agent-managed device is connected to the appliance. : An Agent-managed device is not connected to the appliance. | |
The hostname of the target device. Click the Remote Connection button to open a Remote Desktop Connection to the target device (Microsoft Edge only): | |
I indicates a successful installation. U indicates a successful uninstallation. | |
4. |
NOTE: The [computer inventory] link appears only if the provisioning process can match the MAC address of the target device with the current inventory data. See Managing MIA devices. |
© ALL RIGHTS RESERVED. Feedback Termini di utilizzo Privacy Cookie Preference Center