However, if you change the Type to a type that does not support the data already entered in a field, that data is lost. For example, you might have a field named Model Number that is of the Type, Text, and that contains the value A123. If you change the Type from Text to Number, the system cannot convert A123 to a valid number. The value for the Model Number field is set to 0.
For example, if you created a custom field named BIOS Serial Number in the Device Asset Type, that field would be available to all Device Asset Types. However, if you delete the BIOS Serial Number custom asset, that field, and any values entered in the field, are removed from all Device Asset Types.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
▪ |
2. |
3. |
All asset types except Locations. In the Defaut Asset Status field, under the General tab, enter a default asset status, or a custom one (if they exist). |
◦ |
Active: Any asset that is deployed, active, or in use. |
◦ |
Disposed: An asset that is no longer available for use. |
◦ |
Expired: A software license or contract asset that has expired. |
◦ |
In Stock: A recently received asset. |
◦ |
Missing: Any asset that cannot be located. |
◦ |
Repair: An asset that is being repaired. |
◦ |
Reserved: An asset that is set aside for a specific person or use. |
◦ |
Retired: Any asset that reached its end-of-life state, or is no longer in use. |
◦ |
Stolen: An asset that has been reported as stolen. |
4. |
If you want to allow users who do not have the Administrator role to delete assets of this type, select Restrict Delete to built-in Administrator Role. This option is turned off by default. Only administrators can configure this option. For other types of users, this field appears on the page, but it is disabled. |
5. |
If you want assets of this type to display the asset location in the asset details, select Show Location settings. This option is turned off by default. |
6. |
Asset Fields. In the Defaut Archive Asset Status field, enter an asset status that you want to automatically assign to a device when it becomes archived. |
7. |
8. |
The values that appear in fields that contain lists of values. This field is enabled when you select Single Select or Multiple Select from the Type drop-down list. If you select Single Select or Multiple Select, you must enter at least one value in this field. To use multiple values, separate each value with a comma. | |||||||||||||||||||||||||||||||||||
The value that appears in the field by default. If you select Single Select or Multiple Select from the Type drop-down list, you must type one of the values given in the Available Values field. | |||||||||||||||||||||||||||||||||||
The type of field. Field types include:
| |||||||||||||||||||||||||||||||||||
Whether the asset field points to other assets. A check box is enabled when you select Assets Asset Type from the Type drop-down list. Select the check box to allow this custom field to point to multiple records. | |||||||||||||||||||||||||||||||||||
License assets only. The tab on which this field appears on the License Detail page: General, Purchase, Maintenance, Related, Custom, or Notes. For more information about the tabs appearing on the License Detail page, see Add or edit licenses. | |||||||||||||||||||||||||||||||||||
Device assets only. The location, on the Device Detail page, where the field is reported. For example, if you are creating a printer Asset Subtype, with a field named Toner Level, you might select Hardware because that field is related to printer hardware. However, you can choose any section in the drop-down list for any field. |
10. |
Optional: Add Asset Subtypes for Asset Types. See Add Asset Subtypes and select Device Detail page preferences.
Almost all Device asset data, whether displayed in the Assets or Inventory sections, originates from the Assets section.
The only device inventory or asset information that comes from the Inventory section is data for the Mapped Inventory Field and the Matching Asset Field. The values for those fields are collected each time devices are inventoried. During the inventory process, the appliance determines whether devices already have mapped assets. If no asset is found, the appliance creates one.
The default data type for Mapped Inventory Field is System Name, and the default data type for Matching Asset Field is Name. However, if you re-image your systems, the information under the old system name is lost to the Asset Management component. To prevent this loss, consider using BIOS serial numbers, IP addresses, MAC addresses, or something similar for tracking.
You can import Device asset data or change it manually in the Assets section any time.
This example shows how to add fields to the Device Asset Type and select them in the Mapped Inventory Field and the Matching Asset Field.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
a. |
b. |
4. |
a. |
In the Type drop-down list, select Text. Reserve the Number Type for fields on which you perform calculations. Using the Number Type might strip leading zeros in a serial number.
5. |
a. |
In the Type drop-down list, select Text.
6. |
a. |
In the Type drop-down list, select Asset Location.
7. |
8. |
In the General tab, in the Mapped Inventory Field drop-down list, change the value to BIOS Serial Number. |
9. |
10. |
You can edit Asset Types to establish relationships among assets and track them together.
Example: Add fields to the Location Asset Type shows how to make a parent-child relationship with locations by adding a field to the Location Asset Type.
You can add fields to the Location Asset Type as needed.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
3. |
4. |
5. |
When you open a Location asset, the Parent Relationship field is shown on the Asset Detail page.
Parent-child relationships can be useful when managing assets, such as Location assets.
Add Parent Location custom fields as described in Example: Add fields to the Location Asset Type.
When adding parent relationships, start with the highest level (parent level) in the relationship.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
2. |
a. |
b. |
c. |
4. |
a. |
b. |
c. |
For this example, select Western Division for the Parent Location. If you have many Location assets, enter the first characters in the Filter field to limit the choices available in the Parent Location field. |
5. |
You can delete Asset Types, provided that no assets are assigned to those types.
You have Asset Types that do not have any assets assigned to them.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
3. |
However, if you change the Type to a type that does not support the data already entered in a field, that data is lost. For example, you might have a field named Model Number that is of the Type, Text, and that contains the value A123. If you change the Type from Text to Number, the system cannot convert A123 to a valid number. The value for the Model Number field is set to 0.
For example, if you created a custom field named BIOS Serial Number in the Device Asset Type, that field would be available to all Device Asset Types. However, if you delete the BIOS Serial Number custom asset, that field, and any values entered in the field, are removed from all Device Asset Types.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
▪ |
2. |
3. |
All asset types except Locations. In the Defaut Asset Status field, under the General tab, enter a default asset status, or a custom one (if they exist). |
◦ |
Active: Any asset that is deployed, active, or in use. |
◦ |
Disposed: An asset that is no longer available for use. |
◦ |
Expired: A software license or contract asset that has expired. |
◦ |
In Stock: A recently received asset. |
◦ |
Missing: Any asset that cannot be located. |
◦ |
Repair: An asset that is being repaired. |
◦ |
Reserved: An asset that is set aside for a specific person or use. |
◦ |
Retired: Any asset that reached its end-of-life state, or is no longer in use. |
◦ |
Stolen: An asset that has been reported as stolen. |
4. |
If you want to allow users who do not have the Administrator role to delete assets of this type, select Restrict Delete to built-in Administrator Role. This option is turned off by default. Only administrators can configure this option. For other types of users, this field appears on the page, but it is disabled. |
5. |
If you want assets of this type to display the asset location in the asset details, select Show Location settings. This option is turned off by default. |
6. |
Asset Fields. In the Defaut Archive Asset Status field, enter an asset status that you want to automatically assign to a device when it becomes archived. |
7. |
8. |
The values that appear in fields that contain lists of values. This field is enabled when you select Single Select or Multiple Select from the Type drop-down list. If you select Single Select or Multiple Select, you must enter at least one value in this field. To use multiple values, separate each value with a comma. | |||||||||||||||||||||||||||||||||||
The value that appears in the field by default. If you select Single Select or Multiple Select from the Type drop-down list, you must type one of the values given in the Available Values field. | |||||||||||||||||||||||||||||||||||
The type of field. Field types include:
| |||||||||||||||||||||||||||||||||||
Whether the asset field points to other assets. A check box is enabled when you select Assets Asset Type from the Type drop-down list. Select the check box to allow this custom field to point to multiple records. | |||||||||||||||||||||||||||||||||||
License assets only. The tab on which this field appears on the License Detail page: General, Purchase, Maintenance, Related, Custom, or Notes. For more information about the tabs appearing on the License Detail page, see Add or edit licenses. | |||||||||||||||||||||||||||||||||||
Device assets only. The location, on the Device Detail page, where the field is reported. For example, if you are creating a printer Asset Subtype, with a field named Toner Level, you might select Hardware because that field is related to printer hardware. However, you can choose any section in the drop-down list for any field. |
10. |
Optional: Add Asset Subtypes for Asset Types. See Add Asset Subtypes and select Device Detail page preferences.
Almost all Device asset data, whether displayed in the Assets or Inventory sections, originates from the Assets section.
The only device inventory or asset information that comes from the Inventory section is data for the Mapped Inventory Field and the Matching Asset Field. The values for those fields are collected each time devices are inventoried. During the inventory process, the appliance determines whether devices already have mapped assets. If no asset is found, the appliance creates one.
The default data type for Mapped Inventory Field is System Name, and the default data type for Matching Asset Field is Name. However, if you re-image your systems, the information under the old system name is lost to the Asset Management component. To prevent this loss, consider using BIOS serial numbers, IP addresses, MAC addresses, or something similar for tracking.
You can import Device asset data or change it manually in the Assets section any time.
This example shows how to add fields to the Device Asset Type and select them in the Mapped Inventory Field and the Matching Asset Field.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
a. |
b. |
4. |
a. |
In the Type drop-down list, select Text. Reserve the Number Type for fields on which you perform calculations. Using the Number Type might strip leading zeros in a serial number.
5. |
a. |
In the Type drop-down list, select Text.
6. |
a. |
In the Type drop-down list, select Asset Location.
7. |
8. |
In the General tab, in the Mapped Inventory Field drop-down list, change the value to BIOS Serial Number. |
9. |
10. |
You can edit Asset Types to establish relationships among assets and track them together.
Example: Add fields to the Location Asset Type shows how to make a parent-child relationship with locations by adding a field to the Location Asset Type.
You can add fields to the Location Asset Type as needed.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
3. |
4. |
5. |
When you open a Location asset, the Parent Relationship field is shown on the Asset Detail page.
Parent-child relationships can be useful when managing assets, such as Location assets.
Add Parent Location custom fields as described in Example: Add fields to the Location Asset Type.
When adding parent relationships, start with the highest level (parent level) in the relationship.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
2. |
a. |
b. |
c. |
4. |
a. |
b. |
c. |
For this example, select Western Division for the Parent Location. If you have many Location assets, enter the first characters in the Filter field to limit the choices available in the Parent Location field. |
5. |
You can delete Asset Types, provided that no assets are assigned to those types.
You have Asset Types that do not have any assets assigned to them.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
3. |
However, if you change the Type to a type that does not support the data already entered in a field, that data is lost. For example, you might have a field named Model Number that is of the Type, Text, and that contains the value A123. If you change the Type from Text to Number, the system cannot convert A123 to a valid number. The value for the Model Number field is set to 0.
For example, if you created a custom field named BIOS Serial Number in the Device Asset Type, that field would be available to all Device Asset Types. However, if you delete the BIOS Serial Number custom asset, that field, and any values entered in the field, are removed from all Device Asset Types.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
▪ |
2. |
3. |
All asset types except Locations. In the Defaut Asset Status field, under the General tab, enter a default asset status, or a custom one (if they exist). |
◦ |
Active: Any asset that is deployed, active, or in use. |
◦ |
Disposed: An asset that is no longer available for use. |
◦ |
Expired: A software license or contract asset that has expired. |
◦ |
In Stock: A recently received asset. |
◦ |
Missing: Any asset that cannot be located. |
◦ |
Repair: An asset that is being repaired. |
◦ |
Reserved: An asset that is set aside for a specific person or use. |
◦ |
Retired: Any asset that reached its end-of-life state, or is no longer in use. |
◦ |
Stolen: An asset that has been reported as stolen. |
4. |
If you want to allow users who do not have the Administrator role to delete assets of this type, select Restrict Delete to built-in Administrator Role. This option is turned off by default. Only administrators can configure this option. For other types of users, this field appears on the page, but it is disabled. |
5. |
If you want assets of this type to display the asset location in the asset details, select Show Location settings. This option is turned off by default. |
6. |
Asset Fields. In the Defaut Archive Asset Status field, enter an asset status that you want to automatically assign to a device when it becomes archived. |
7. |
8. |
The values that appear in fields that contain lists of values. This field is enabled when you select Single Select or Multiple Select from the Type drop-down list. If you select Single Select or Multiple Select, you must enter at least one value in this field. To use multiple values, separate each value with a comma. | |||||||||||||||||||||||||||||||||||
The value that appears in the field by default. If you select Single Select or Multiple Select from the Type drop-down list, you must type one of the values given in the Available Values field. | |||||||||||||||||||||||||||||||||||
The type of field. Field types include:
| |||||||||||||||||||||||||||||||||||
Whether the asset field points to other assets. A check box is enabled when you select Assets Asset Type from the Type drop-down list. Select the check box to allow this custom field to point to multiple records. | |||||||||||||||||||||||||||||||||||
License assets only. The tab on which this field appears on the License Detail page: General, Purchase, Maintenance, Related, Custom, or Notes. For more information about the tabs appearing on the License Detail page, see Add or edit licenses. | |||||||||||||||||||||||||||||||||||
Device assets only. The location, on the Device Detail page, where the field is reported. For example, if you are creating a printer Asset Subtype, with a field named Toner Level, you might select Hardware because that field is related to printer hardware. However, you can choose any section in the drop-down list for any field. |
10. |
Optional: Add Asset Subtypes for Asset Types. See Add Asset Subtypes and select Device Detail page preferences.
Almost all Device asset data, whether displayed in the Assets or Inventory sections, originates from the Assets section.
The only device inventory or asset information that comes from the Inventory section is data for the Mapped Inventory Field and the Matching Asset Field. The values for those fields are collected each time devices are inventoried. During the inventory process, the appliance determines whether devices already have mapped assets. If no asset is found, the appliance creates one.
The default data type for Mapped Inventory Field is System Name, and the default data type for Matching Asset Field is Name. However, if you re-image your systems, the information under the old system name is lost to the Asset Management component. To prevent this loss, consider using BIOS serial numbers, IP addresses, MAC addresses, or something similar for tracking.
You can import Device asset data or change it manually in the Assets section any time.
This example shows how to add fields to the Device Asset Type and select them in the Mapped Inventory Field and the Matching Asset Field.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
a. |
b. |
4. |
a. |
In the Type drop-down list, select Text. Reserve the Number Type for fields on which you perform calculations. Using the Number Type might strip leading zeros in a serial number.
5. |
a. |
In the Type drop-down list, select Text.
6. |
a. |
In the Type drop-down list, select Asset Location.
7. |
8. |
In the General tab, in the Mapped Inventory Field drop-down list, change the value to BIOS Serial Number. |
9. |
10. |
You can edit Asset Types to establish relationships among assets and track them together.
Example: Add fields to the Location Asset Type shows how to make a parent-child relationship with locations by adding a field to the Location Asset Type.
You can add fields to the Location Asset Type as needed.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
3. |
4. |
5. |
When you open a Location asset, the Parent Relationship field is shown on the Asset Detail page.
Parent-child relationships can be useful when managing assets, such as Location assets.
Add Parent Location custom fields as described in Example: Add fields to the Location Asset Type.
When adding parent relationships, start with the highest level (parent level) in the relationship.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
2. |
a. |
b. |
c. |
4. |
a. |
b. |
c. |
For this example, select Western Division for the Parent Location. If you have many Location assets, enter the first characters in the Filter field to limit the choices available in the Parent Location field. |
5. |
You can delete Asset Types, provided that no assets are assigned to those types.
You have Asset Types that do not have any assets assigned to them.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
3. |
However, if you change the Type to a type that does not support the data already entered in a field, that data is lost. For example, you might have a field named Model Number that is of the Type, Text, and that contains the value A123. If you change the Type from Text to Number, the system cannot convert A123 to a valid number. The value for the Model Number field is set to 0.
For example, if you created a custom field named BIOS Serial Number in the Device Asset Type, that field would be available to all Device Asset Types. However, if you delete the BIOS Serial Number custom asset, that field, and any values entered in the field, are removed from all Device Asset Types.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
▪ |
2. |
3. |
All asset types except Locations. In the Defaut Asset Status field, under the General tab, enter a default asset status, or a custom one (if they exist). |
◦ |
Active: Any asset that is deployed, active, or in use. |
◦ |
Disposed: An asset that is no longer available for use. |
◦ |
Expired: A software license or contract asset that has expired. |
◦ |
In Stock: A recently received asset. |
◦ |
Missing: Any asset that cannot be located. |
◦ |
Repair: An asset that is being repaired. |
◦ |
Reserved: An asset that is set aside for a specific person or use. |
◦ |
Retired: Any asset that reached its end-of-life state, or is no longer in use. |
◦ |
Stolen: An asset that has been reported as stolen. |
4. |
If you want to allow users who do not have the Administrator role to delete assets of this type, select Restrict Delete to built-in Administrator Role. This option is turned off by default. Only administrators can configure this option. For other types of users, this field appears on the page, but it is disabled. |
5. |
If you want assets of this type to display the asset location in the asset details, select Show Location settings. This option is turned off by default. |
6. |
Asset Fields. In the Defaut Archive Asset Status field, enter an asset status that you want to automatically assign to a device when it becomes archived. |
7. |
8. |
The values that appear in fields that contain lists of values. This field is enabled when you select Single Select or Multiple Select from the Type drop-down list. If you select Single Select or Multiple Select, you must enter at least one value in this field. To use multiple values, separate each value with a comma. | |||||||||||||||||||||||||||||||||||
The value that appears in the field by default. If you select Single Select or Multiple Select from the Type drop-down list, you must type one of the values given in the Available Values field. | |||||||||||||||||||||||||||||||||||
The type of field. Field types include:
| |||||||||||||||||||||||||||||||||||
Whether the asset field points to other assets. A check box is enabled when you select Assets Asset Type from the Type drop-down list. Select the check box to allow this custom field to point to multiple records. | |||||||||||||||||||||||||||||||||||
License assets only. The tab on which this field appears on the License Detail page: General, Purchase, Maintenance, Related, Custom, or Notes. For more information about the tabs appearing on the License Detail page, see Add or edit licenses. | |||||||||||||||||||||||||||||||||||
Device assets only. The location, on the Device Detail page, where the field is reported. For example, if you are creating a printer Asset Subtype, with a field named Toner Level, you might select Hardware because that field is related to printer hardware. However, you can choose any section in the drop-down list for any field. |
10. |
Optional: Add Asset Subtypes for Asset Types. See Add Asset Subtypes and select Device Detail page preferences.
Almost all Device asset data, whether displayed in the Assets or Inventory sections, originates from the Assets section.
The only device inventory or asset information that comes from the Inventory section is data for the Mapped Inventory Field and the Matching Asset Field. The values for those fields are collected each time devices are inventoried. During the inventory process, the appliance determines whether devices already have mapped assets. If no asset is found, the appliance creates one.
The default data type for Mapped Inventory Field is System Name, and the default data type for Matching Asset Field is Name. However, if you re-image your systems, the information under the old system name is lost to the Asset Management component. To prevent this loss, consider using BIOS serial numbers, IP addresses, MAC addresses, or something similar for tracking.
You can import Device asset data or change it manually in the Assets section any time.
This example shows how to add fields to the Device Asset Type and select them in the Mapped Inventory Field and the Matching Asset Field.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
a. |
b. |
4. |
a. |
In the Type drop-down list, select Text. Reserve the Number Type for fields on which you perform calculations. Using the Number Type might strip leading zeros in a serial number.
5. |
a. |
In the Type drop-down list, select Text.
6. |
a. |
In the Type drop-down list, select Asset Location.
7. |
8. |
In the General tab, in the Mapped Inventory Field drop-down list, change the value to BIOS Serial Number. |
9. |
10. |
You can edit Asset Types to establish relationships among assets and track them together.
Example: Add fields to the Location Asset Type shows how to make a parent-child relationship with locations by adding a field to the Location Asset Type.
You can add fields to the Location Asset Type as needed.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
c. |
2. |
3. |
4. |
5. |
When you open a Location asset, the Parent Relationship field is shown on the Asset Detail page.
Parent-child relationships can be useful when managing assets, such as Location assets.
Add Parent Location custom fields as described in Example: Add fields to the Location Asset Type.
When adding parent relationships, start with the highest level (parent level) in the relationship.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
2. |
a. |
b. |
c. |
4. |
a. |
b. |
c. |
For this example, select Western Division for the Parent Location. If you have many Location assets, enter the first characters in the Filter field to limit the choices available in the Parent Location field. |
5. |
You can delete Asset Types, provided that no assets are assigned to those types.
You have Asset Types that do not have any assets assigned to them.
1. |
a. |
Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information. |
b. |
3. |
© ALL RIGHTS RESERVED. Feedback Termini di utilizzo Privacy Cookie Preference Center