Rapid Recovery 6.9 - Commands and Scripting Reference Guide

The Start-AttachabilityCheck command forces an attachability check for all SQL Server databases protected by the Core.

Usage

The usage for the command is as follows:

Start-AttachabilityCheck -core [host name] -user [username] - password [password]  - protectedserver [machine name | IP address] -rpn [number | numbers] | -time [time string]

Command Options

The following table describes the options available for the Start-AttachabilityCheck command:

Table 163: Start-AttachabilityCheck command options
Option	Description
-?	Display this help message.
-core	Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user	Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.
-password	Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used.
-protectedserver	The protected machine on which to perform the SQL attachability check.
-rpn	Optional. The sequential number of a recovery point on which to perform the SQL attachability check. You can use the `-GetRecoveryPoints` command to obtain recovery point numbers. You can specify several space-separated numbers to perform the checks against multiple recovery points with a single command. Note: If neither ‘time’ nor ‘rpn’ option is specified in this command, than the most recent recovery point is used for the attachability check.
-time	Optional. Determines recovery point to be selected for SQL attachability check. You need to specify exact time in the format “MM/DD/YYYY hh:mm tt” (for example: “04/24/2015 09:00 AM”).” Specify date time values of the time zone set on your local machine. Note: If neither ‘time’ nor ‘rpn’ option is specified in this command, than the most recent recovery point will be exported.

Example:

Perform a SQL attachability check on the most recent recovery point for the specified protected SQL server:

>Start-AttachabilityCheck - protectedserver 10.10.9.120

Start-AzureDeploy

You can use the Start-AzureDeploy command to export a virtual machine (VM) to a Microsoft Azure cloud account.

Usage

The usage for the command is as follows:

Start-AzureDeploy -core [host name] -user [user name for Core]
		-password [password for Core] -protectedserver [name | IP address] -volumes
		[volume names | all] -destinationcontainer [Azure destination container]
		-deploymentname [name of deployment] -subscriptionid [Azure subscription ID]
		-cloudservicename [cloud service name] -vmname [virtual machine name] -vmsize
		[virtual machine size] -endpointname [rdp | ssh] -protocol [tcp | udp]
		-publicremoteaccessport [public port number] -privateremoteaccessport [private
		port number]

Command Options

The following table describes the options available for the Start-AzureDeploy command:

Table 164: Start-AzureDeploy command options
Option	Description
-?	Display this help message.
-core	Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user	Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password	Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver	Protected machine with recovery points that you want to export.
-volumes	Optional. List of additional volume names for the deploy. If you use the value `all` or use no value, then all volumes deploy.
-destinationcontainer	The name of the Azure destination container you want to use for the deploy.
-deploymentname	The name of the deployment.
-subscriptionid	The Azure subscription ID.
-cloudservicename	The name of the Azure cloud service.
-vmname	The name of the virtual machine.
-vmsize	The size of the virtual machine; for example, `A0`, `Basic_A4`, or `Standard_G1`.
-endpointname	The Azure endpoint protocol used only for remote access `rdp` or `ssh`. The default value is `rdp`.
-protocol	The protocol used only for remote access `tcp` or `udp`. The default value is `tcp`.
-publicremoteaccessport	The public port for using remote access. The default value is `3389`.
-privateremoteaccessport	The private port for using remote access. The default value is `3389`.
-privateagentport	Optional. The Agent port. If the port value is 0, then the value is determined by the Agent configuration. Note: If neither the parameter `-publicagentport` nor `-privateagentport` is specified, then no endpoint is added.
-publicagentport	Optional. The external Agent port. If the port value is 0, then the value is determined by the Agent configuration. Note: If neither the parameter `-publicagentport` nor `-privateagentport` is specified, then no endpoint is added.
-privatetransferport	Optional. The TCP port upon which to accept connections from the Core for the transfer of data from the Agent. If the port value is 0, then the value is determined by the Agent configuration. Note: If neither the parameter `-publictransferport` nor `-privatetransferport` is specified, then no endpoint is added.
-publictransferport	Optional. The external TCP port upon which to accept connections from the Core for the transfer of data from the Agent. If the port value is 0, then the value is determined by the Agent configuration. Note: If neither the parameter `-publictransferport` nor `-privatetransferport` is specified, then no endpoint is added.

Examples:

Deploy data to Azure:

>Start-AzureDeploy -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0

Deploy data to Azure using a specified endpoint:

>Start-AzureDeploy -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0 -endpointname ssh -protocol udp -publicremoteaccessport 1555 -privateremoteaccessport 22

Deploy data to Azure with specified Agent and transfer endpoint when the -privateagentport option has a user-defined value of 8006. The parameter for -publicagentport uses the special value 0, which is copied from -privateagentport. The parameter for -privatetransferport uses the special value 0, which is taken from the Agent configuration. The parameter for -publictransferport uses the special value 0, which is copied from -privatetransferport:

>Start-AzureDeploy -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0 -privateagentport 8006 -publicagentport 0 -privatetransferport 0 -publictransferport 0

Deploy data to Azure using all available disks:

>Start-AzureDeploy -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0 -privateagentport 8006 -publicagentport 0 -privatetransferport 0 -publictransferport 0 -Volumes all

Start-AzureExport

You can use the Start-AzureExport command to force the export of data from a protected machine to a Microsoft Azure virtual server.

Usage

The usage for the command is as follows:

Start-AzureExport -core [host name] -user [user name for Core] -password [password for Core] -protectedserver [name | IP address] -volumes [volume names | all] -rpn [number | numbers] -time [time string] -cloudaccountid [Azure account ID] -storageaccountname[ storage account name] -containername [container name] -foldername [folder name] -deploymentname [deployment name] -destinationcontainer [Azure destination container] -subscriptionid [Azure subscription ID] -cloudservicename [cloud service name] -vmname [virtual machine name] -vmsize [virtual machine size] -endpointname [rdp | ssh] -protocol [tcp | udp] -publicremoteaccessport [public remote access port number] -privateremoteaccessport [private port number]

Command Options

The following table describes the options available for the Start-AzureExport command:

Table 165: Start-AzureExport command options
Option	Description
-?	Display this help message.
-core	Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user	Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password	Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver	Protected machine with recovery points that you want to export.
-volumes	Optional. List of additional volume names for the deploy. If you use the value `all` or use no value, the all volumes deploy.
-rpn	Optional. The sequential number of a recovery point that you want to export (use the `/list` rps command to get the numbers). If neither `-time` nor `-rpn` is specified, then the most recent recovery point is exported.
-time	Optional. This option determines the recovery points to select for export. Specify the exact time in the format `mm/dd/yyyy hh:mm tt`; for example, `2/24/2012 09:00 AM`. Keep in mind to specify the date time value of the time zone set on your PC. If neither `-time` nor `-rpn` is specified, then the most recent recovery point is exported.
-cloudaccountid	Optional, if the `-storageaccountname` is specified. Specify the Azure cloud account ID.
-storageaccountname	Optional, if the `-cloudaccountname` is specified. Specify the Azure storage account name.
-containername	The name of the Azure container.
-foldername	Optional. The name of the Azure folder.
-deploymentname	Use this option to specify the name of the deployment. It is required for a deploy after export only.
-destinationcontainer	The name of the Azure destination container you want to use for the deploy.
-subscriptionid	The Azure subscription ID. It is required for a deploy after export only.
-cloudservicename	The name of the Azure cloud service. It is required for a deploy after export only.
-vmname	The name of the virtual machine. It is required for a deploy after export only.
-vmsize	The size of the virtual machine; for example, `A0`, `Basic_A4`, or `Standard_G1`.
-endpointname	The Azure endpoint protocol used only for remote access `rdp` or `ssh`. The default value is `rdp`. It is required for a deploy after export only.
-protocol	The protocol used only for remote access `tcp` or `udp`. It is required for a deploy after export only. The default value is `tcp`.
-publicremoteaccessport	The public port for using remote access. The default value is `3389`.
-privateremoteaccessport	The private port for using remote access. The default value is `3389`.
-privateagentport	Optional. The Agent port. If the port value is 0, then the value is determined by the Agent configuration. NOTE: If neither the parameter `-publicagentport` nor `-privateagentport` is specified, then no endpoint is added.
-publicagentport	Optional. The external Agent port. If the port value is 0, then the value is determined by the Agent configuration. NOTE: If neither the parameter `-publicagentport` nor `-privateagentport` is specified, then no endpoint is added.
-privatetransferport	Optional. The TCP port upon which to accept connections from the Core for the transfer of data from the Agent. If the port value is 0, then the value is determined by the Agent configuration. NOTE: If neither the parameter `-publictransferport` nor `-privatetransferport` is specified, then no endpoint is added.
-publictransferport	Optional. The external TCP port upon which to accept connections from the Core for the transfer of data from the Agent. If the port value is 0, then the value is determined by the Agent configuration. NOTE: If neither the parameter `-publictransferport` nor `-privatetransferport` is specified, then no endpoint is added.
-hypervgenerationtype	Specifies virtual machine generation. Azure supports two generations of Hyper-V virtual machines: 1 and 2.

Examples:

Export data to Azure:

>Start-AzureExport -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -cloudaccountid "Cloud Account 1" -containername "mycontainer" -foldername "folder" -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0

Export data to Azure using a specified endpoint:

>Start-AzureExport -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -cloudaccountid "Cloud Account 1" -containername "mycontainer" -foldername "folder" -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0 -endpointname ssh -protocol udp -publicremoteaccessport 1555 -privateremoteaccessport 22

Export data to Azure with a specified Agent endpoint when the -privateagentport option uses the special value 0, which is taken from the Agent configuration. The -publicagentport option has the user-defined value of 1888:

>Start-AzureExport -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -cloudaccountid "Cloud Account 1" -containername "mycontainer" -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0 -privateagentport 0 -publicagentport 1888

Export data to Azure with specified Agent and transfer endpoints. The -privateagentport option has the user-defined value of 8006. The parameter for -publicagentport uses the special value of 0, which is copied from the -privateagentport option. The parameter for -privatetransferport uses the special value of 0, which is taken from the Agent configuration. The parameter for -publictransferport uses the special value 0, which is copied from the -privatetransferport option.:

>Start-AzureExport -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -cloudaccountid "Cloud Account 1" -containername "mycontainer" -foldername "folder" -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0 -privateagentport 8006 -publicagentport 0 -privatetransferport 0 -publictransferport 0

Start-ChecksumCheck

The Start-ChecksumCheck PowerShell command lets you force a checksum check of Exchange Server recovery points.

Usage

The usage for the command is as follows:

Start-ChecksumCheck -core [host name] -user [login] -password [password] -protectedserver [name | IP address] -rpn [number | numbers] | -time [time string]

Command Options

The following table describes the options available for the Start-ChecksumCheck command:

Table 166: Start-ChecksumCheck command options
Option	Description
-?	Display this help message.
-core	Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user	Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.
-password	Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on. If none are provided, then the logged-on user's credentials will be used.
-protectedserver	The name of the protected machine.
-rpn	Optional. Only for chain deletion (base image with chain of incrementals or orphaned points). The sequential number of a recovery point to check (use the Get-RecoveryPoints command to obtain the numbers). You can specify several space-separated numbers to delete multiple recovery points with a single command.
-time	Optional. Select the recovery point to check by its creation time, instead of its sequential number. Specify the exact time in the format "mm/dd/yyyy hh:mm tt" (for example, "2/24/2012 09:00 AM"). Keep in mind to specify date and time values of the time zone set on your computer.

Example:

Start a checksum check on two recovery points.:

> Start-ChecksumCheck -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -rpn 5 7

Selecione seu produto:

Para podermos atendê-lo melhor, informe o Propósito de seu chat:

Soluções recomendadas para seu problema

Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Start-AttachabilityCheck

Usage

Command Options

Example:

Start-AzureDeploy

Usage

Command Options

Examples:

Start-AzureExport

Usage

Command Options

Examples:

Start-ChecksumCheck

Usage

Command Options

Example: