Converse agora com nosso suporte
Chat com o suporte

Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

Edit-ScheduledArchive

The Edit-ScheduledArchive command lets you use PowerShell to make changes to an existing scheduled archive.

Usage

The usage for the command is as follows:

Edit-ScheduledArchive -core [host name] -user [login] -password [password] -all | -protectedserver [name | IP address | "[name1 | IP address1]" "[name2 | IP address2]"] -path [location] -cloudaccountname [name] -cloudcontainer [name] -recycleaction [type] -scheduletype [type] -dayofweek [name] -dayofmonth [number] -time [time] -initialpause -id [id]

Command Options

The following table describes the options available for the Edit-ScheduledArchive command:

Table 91: Edit-ScheduledArchive command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-protectedserver
The protected machine with recovery points that you want to archive. You can specify multiple machine names enclosed in double quotes and separated by commas.
-all
Archive recovery points for all protected machines.
-path
The path to where to save the archived data. For example:
  • Local machine: "d:\work\archive"
  • Network path: "\\servername\sharename"
  • Folder in a cloud account: "Folder Name"
Note: The number of symbols should not be greater than 100 for local and network locations, and should not be greater than 150 for a cloud location.
-cloudaccountname

Optional. Use only for cloud archiving. The name of the cloud account where you want to save the archive.

-cloudcontainer

Optional. Use only for cloud archiving. The name of the cloud container in the chosen cloud account, where the archive will be saved. When you use this option, you should also specify the "-cloudaccountname" parameter.

-recycleaction

The type of recycle action. Specified by using one of the following four values:

  • "replacethiscore" - Overwrites any pre-existing archived data pertaining to this Core, but leaves the data for other Cores intact.
  • "erasecompletely" - Clears all archived data from the directory before writing the new archive.
  • "incremental" - Lets you add recovery points to an existing archive. It compares recovery points to avoid duplicating data that already exists in the archive.
-scheduletype

Type of schedule interval. Specified the option with one of the following four values:

  • "daily" - For a daily automatically created archive.
  • "weekly" - For a weekly automatically created archive. You must specify the "-dayofweek" parameter.
  • "monthly" - For a monthly automatically created archive. You must specify the "-dayofmonth" parameter. If a month does not have the day specified—for example, "31"—then the archive will not occur for that month.
  • "lastdayofmonth" - For automatically creating an archive on the last day of each month.
-dayofweek

Use only for the "weekly" option of the "-scheduletype" parameter. The day of the week on which to automatically create the archive (for example, "Monday").

-dayofmonth

Use only for the "month" option of the "-scheduletype" parameter. The day (number) of the month on which to automatically create the archive (for example, "15").

-time
The hour of the day when you want to create an archive.
-initialpause
Optional. Specify this option if you want to initially pause archiving after you configure the archiving schedule.
-id
The identifier of the scheduled archive that you want to edit.

Example:

Edit a scheduled archive on the local Core:

>Edit-ScheduledArchive -protectedserver protectedserver1 -path d:\work\archive -cloudaccountname cloud1 -cloudcontainer cloudarchives -recycleaction incremental -scheduletype daily -time 12:00 AM -initialpause -i
    d archiveid

Edit-VBVirtualStandby

The Edit-VBVirtualStandby command lets you use PowerShell to make changes to an existing virtual export to a VirtualBox virtual machine (VM).

Usage

The usage for the command is as follows:

Edit-VBVirtualStandby [-TargetPath <String>] [-PathUserName <String>] [-PathPassword <String>] [-LinuxHostName <String>] [-HostPort <UInt32>] [-AccountUserName <String>] [-AccountPassword <String>] [-ProtectedServer <String>] [-Volumes <String[]>] [-VMName <String>] [-UseSourceRam] [-Ram <String>] [-User <String>] [-Core <String>] [-Password <String>] [-Verbose] [-Debug] [-ErrorAction <ActionPreference>] [-WarningAction <ActionPreference>] [-ErrorVariable <String>] [-WarningVariable <String>] [-OutVariable <String>] [-OutBuffer <Int32>]

Command Options

The following table describes the options available for the Edit-VBVirtualStandby command:

Updated option descriptions TK.

Table 92: Edit-VBVirtualStandby command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-protectedserver
Show jobs for a specific protected machine, indicated by IP address.
-all
Show all jobs, including those performed by the Core and all protected servers.
-number
Optional. Determine how many records to display. available values are:

all (display all jobs); l[number] or [number] (fetches ## most recent jobs sorted by execution and time); f[number] (displays first ## recovery jobs sorted by execution and time). By default, the 20 most recent jobs are shown.

-jobtype
Optional. Specifies the job type filter. Available values are: 'transfer' (data transfer), 'repository' (repository maintenance), 'replication' (local and remote replications), 'backup' (backup and restore), 'bootcdbuilder' (create boot CDs), 'diagnostics' (upload logs), 'exchange' (Exchange Server files check), 'export' (recovery point export), 'pushinstall' (deploy agents), 'rollback' (restoring from a recovery point), 'rollup' (recovery point rollups), 'sqlattach' (agent attachability checks), and 'mount' (mount repository). By default, all jobs of the specified type are returned.
-time
Optional. Filter output by date and time for the job started. Available types of input include:

#d or DD (where # is a number for the period of time of days before now until now)

#h or #H (where # is number for the period of hours before now until now)

“time date 1”, “time date 2” (to show a custom range of time from a specific date appearing before the comma to a specific date following the comma).

Example:

Lists all active jobs on the local Core:

>Get-activejobs –all

Edit-VMVirtualStandby

The Edit-VMVirtualStandby command lets you use PowerShell to make changes to an existing virtual export to a VMware Workstation virtual machine (VM).

Usage

The usage for the command is as follows:

 Edit-VMVirtualStandby [-TargetPath <String>] [-PathUserName <String>] [-PathPassword <String>] [-ProtectedServer <S
    tring>] [-Volumes <String[]>] [-VMName <String>] [-UseSourceRam] [-Ram <String>] [-User <String>] [-Core <String>]
    [-Password <String>] [-Verbose] [-Debug] [-ErrorAction <ActionPreference>] [-WarningAction <ActionPreference>] [-Er
    rorVariable <String>] [-WarningVariable <String>] [-OutVariable <String>] [-OutBuffer <Int32>]

Command Options

The following table describes the options available for the Edit-VMVirtualStandby command:

Table 93: Edit-VMVirtualStandby command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-targetpath
The local or network path (or Linux path, only for VirtualBox export) to the folder for storing the virtual machine files.
-pathusername
The credentials for the target path when it is located on a network share and you specified it with the -targetpath option.
-pathpassword
The password for the target path when it is located on a network share and you specified it with the -targetpath option.
-protectedserver
The protected machine with recovery points that you want to export, indicated by IP address.
-volumes
Optional. A list of volume names that you want to export. When not specified, all volumes export. Values must be separated by a comma. Do not use trailing slashes in volume names. For example: C, F, E.
-vmname
The Windows name of the virtual machine.
-ram
Use this option to allocate a specific amount of RAM on the virtual server.
-usesourceram
Optional. Allocate all of the amount of RAM on the target virtual server that is used on the source virtual server.

Example:

Edit a specific amount of RAM on the existing Virtual Standby:

>Edit-VMVirtualStandby -targetpath "\\servername\sharename" -pathusername "login" -pathpassword "password" -protectedserver 10.10.11.245 -vmname "name" -ram 2048

Edit the list of volume names to be exported to the existing Virtual Standby:

>Edit-VMVirtualStandby -targetpath "\\servername\sharename" -pathusername "login" -pathpassword "password" -protectedserver 10.10.11.245 -vmname "name" -volumes C,F

Enable-HyperVAutoProtection

The Enable-HyperVAutoProtection cmdlet lets you enable the auto-protection of new virtual machines (VMs) on a Hyper-V host.

Usage

The usage for the command is as follows:

Enable-HyperVAutoProtection -core [host name] -user [user name] -password [password] -repository [name] -protectedserver [name | IP address]

Command Options

The following table describes the options available for the Enable-HyperVAutoProtection command:

Table 94: Enable-HyperVAutoProtection command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-repository
Required. The name of the repository that is associated with the Core that you want to use to store the data of the virtual machine.
Note: You must enclose the name in double quotes.
-protectedserver
Use this option to protect virtual machines.

Example:

Enable auto-protection of new VMs on a Hyper-V host:

>Enable-HyperVAutoProtection -protectedserver 10.10.1.1 -repository "Repository 1"
Documentos relacionados

The document was helpful.

Selecione a classificação

I easily found the information I needed.

Selecione a classificação