Converse agora com nosso suporte
Chat com o suporte

Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

New-FileSearch

The New-FileSearch command lets you search for a specific file among the recovery points in a repository, which helps you determine which recovery point you need to mount for a restore.

Usage

The usage for the command is as follows:

New-FileSearch -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -startdate [start date] -enddate [end date] -filemasks [file masks] -paths [paths] -subdiroff -ntfsfastoff -limitsearch [limit search]

Command Options

The following table describes the options available for the New-FileSearch command:

Table 127: New-FileSearch command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver
Use this option to specify the protected machine for which you want to enable the Oracle archive log mode.
-startdate
The earliest date of a period within you want to conduct your search. Use the date pattern "MM/DD/YYYY HH:mm:ss AM."
-enddate
The latest date of a period within you want to conduct your search. Use the date pattern "MM/DD/YYYY HH:mm:ss AM."
-filemasks
A combination of fixed and wildcard characters to search for the file. It can be one string or an array of strings. All masks should be separated by a space; for example: -filemasks "first" "second."
-paths
Optional. If there are specific directories in which you want to search, use this option to list the paths. It can be one string or an array of strings. All directories should be separated by a space; for example: -paths "E:\" "C:\Program Files."
-subdiroff
Optional. By default, the file search is performed in subdirectories. Use this option if you want to turn this feature off and not search in subdirectories.
-ntfsfastoff
Optional. By default, the file search is performed using the NTFS fast algorithm. If you want to perform the search without this feature, specify this option.
-limitsearch
Optional. Use this option to limit the number of search results. The default value is 1000.

Examples:

Perform a file search with one file mask:

New-FileSearch -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.10.10 -filemasks "sample"

Perform a file search with multiple file masks in specified directories and without the NTFS fast algorithm:

New-FileSearch -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.10.10 -filemasks "sample" "second" -paths "C:\dir" -ntfsfastoff

New-HyperVVirtualStandby

The New-HyperVVirtualStandby PowerShell command lets you create a new Hyper-V virtual machine (VM) using Rapid Recovery.

Usage

The usage for the command is as follows:

New-HyperVVirtualStandby -core [host name] -user [login] -password [password] -protectedserver [name | IP address]
    -volumes [volumes names] -vmname [virtual machine name] [-gen2] -useVhdx [-uselocalmachine] | -hostname [virtual ho
    st name] -hostport [virtual host port number] -hostusername [virtual host login] -hostpassword [virtual host passwo
    rd]] -vmlocation [location] [-ram [total megabytes] | -usesourceram] -initialexport -exportvmconfigfiles

Command Options

The following table describes the options available for the New-HyperVVirtualStandby command:

Table 128: New-HyperVVirtualStandby command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-protectedserver
Show jobs for a specific protected machine, indicated by IP address.
-volumes
Optional. List the volume names you want to export. If not specified, all volumes in the recovery point(s) are exported. Values must be enclosed in double quotes and separated by space; for example, "c:", "d:".
Note: Do not use trailing slashes in volume names.
-vmname
The Microsoft Windows name of the virtual machine.
-gen2
Optional. Specify to use the second VM generation. If not specified, generation 1 is used. Rapid Recovery supports generation 2 from Windows Server 2012 R2 through Windows 8.1.
-usevhdx
Optional. If you specify this option, Rapid Recovery uses the VHDX disk format to create the VM. If you do not, it uses the VHD disk format. Generation 2 uses only the VHDX format.
-uselocalmachine
Optional. Connect to the local Hyper-V server. When you specify this value, Rapid Recovery ignores the following options:
  • hostname
  • hostport
  • hostusername
  • hostpassword
-hostname
The name of the virtual server host.
-hostport
The port number to use for communicating with the virtual server.
-hostusername
The user name for logging in to the virtual server host.
-hostpassword
The password for logging in to the virtual server host.
-vmlocation
Local or network path to the folder where you want to store the virtual machine files.
-ram
Allocate a specific amount of RAM on the virtual server.
-usesourceram
Optional. Allocate the same amount of RAM on the virtual server that the source protected machine has.
-initialexport
Optional. Specify this option if you need to start an initial on-demand virtual machine export after configuring the virtual standby.
-exportvmconfigfiles
Optional. Specify whether to export virtual machine configuration files. This option is available only both when the source is a virtual protected agentlessly and when the target hpyervisor is the same as the source hypervisor.

Example:

Create a new Hyper-V virtual standby machine:

>New-HyperVVirtualStandby -core [host name] -user [login] -password [password] -protectedserver [name | IP address]
    -volumes [volumes names] -vmname [virtual machine name] [-gen2] -useVhdx [-uselocalmachine] | -hostname [virtual ho
    st name] -hostport [virtual host port number] -hostusername [virtual host login] -hostpassword [virtual host passwo
    rd]] -vmlocation [location] [-ram [total megabytes] | -usesourceram] -initialexport

New-Mount

The New-Mount command mounts a snapshot of one or more drives.

Usage

The usage for the command is as follows:

New-Mount -core [host name] -user [user name] -password [password] -protectedserver [machine name] -mounttype [read | write | readonlywithpreviouswrites] -drives [drive names] -path [location] –time [MM/DD/YYYY hh:mm:ss tt | passed | latest] –rpn [number]

Command Options

The following table describes the options available for the New-Mount command:

Table 129: New-Mount command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-protectedserver
The protected server IP address or machine name (depends on how the particular machine was protected.
-time
Optional. The timestamp of the Recovery Point to mount. This should be in the format that is specified by the OS on the current PC. The administrator is able to get the latest recovery point by specifying latest or last checked recovery point by passed parameter value. By default the latest time option is chosen.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-path
Path on the Core machine to which recovery points will be mounted.
-mounttype
Optional. Specifies a mount mode. Available options are 'read', 'readOnlyWithPreviousWrites' (read-only with previous writes), 'write' (writable). Default mode is read-only.
-volumes
Optional. Space-separated list of volume names to mount. If the volume’s name contains spaces or special characters, it has to be specified using double quotes. If not specified, all volumes will be mounted.
-rpn
Optional. Recovery point number for the mount. You can obtain this using the get-mounts command. Specify several numbers for the rpn parameter to mount different points with a single command.
Note: If you set an array of points to mount, each point will be located in a separate child directory. The name describes the time when the recovery point was created. When you call dismount, all child directories will be removed. You should remove the parent directory manually.

Example:

>New-Mount -core 10.10.10.10:8006 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -path C:\MountedRecoveryPoint -mounttype read -volumes c “d, ko”

Mount an array of recovery points:

>New-Mount –rpn 10 52 41 -protectedserver localhost –path “D:/Folder for mount”

Mount a recovery point with certain time created:

>New-Mount -protectedserver 10.10.5.56 –path “D:/Folder for mount” –time “8/24/2012 11:46 AM”

New-Replication

The New-Replication command lets you set up and force replication for a protected server or servers.

Usage

The usage for the command is as follows:

New-Replication -core [host name] -user [login] -password [password] -targetserver [host name] -protectedserver [name | IP address]

Command Options

The following table describes the options available for the New-Replication command:

Table 130: New-Replication command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used.
-replicationname
Name of the replication configuration on the target Core.
-targetserver
The host name, user name, and password for the target Core.
-protectedserver
The name of the protected machine and repository on the target Core for setting up replication.

Example:

Create new replication for the protected machine with IP 10.10.10.4:

Pending examples from QA.

>New-Replication -targetserver 10.10.10.128 -protectedserver 10.10.10.4
Documentos relacionados

The document was helpful.

Selecione a classificação

I easily found the information I needed.

Selecione a classificação