ResizeDedupeCache
Use the resizededupecache command to change the size of the deduplication cache location for the Azure repository.
Usage
The usage for the command when resizing the deduplication cache location for an Azure repository is as follows:
/resizededupecache -core [host name] -user [login] -password [password] –repository [repository id] -dedupecachesize [cache size]
Command Options
The following table describes the options available for the resizededupecache command:
Table 61: ResizeDedupeCache command options
-? |
Display help on the command. |
-core |
Optional. Remote core host machine IP address (with an optional port number). By default, the connection is made to the core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-repository |
ID of the Azure repository. |
-dedupecachesize |
Optional. Amount of memory to be allocated for deduplication cache. Available units are B, KB, MB, and GB. The default value is 1.5 GB. |
Examples:
Resize the deduplication cache for an Azure repository:
>cmdutil /resizededupecache -repository AzureStorageID -dedupecachesize 200 Gb -core 10.10.10.10:8006 -user administrator -password 23WE@#$sdd
RestartCoreService
If the Core service on the Core machine is stopped, use the restartcoreservice command to start it again.
Usage
The usage for the command is as follows:
/restartcoreservice -core [host name] -user [user name] -password [password] -cancelactivejobs [true | false] -wait [time in seconds]
Command Options
The following table describes the options available for the restartcoreservice command:
Table 62: RestartCoreService command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-cancelactivejobs |
Optional. Use this option to cancel all active jobs on the Core. The default setting is "false." |
-wait |
Optional. This option indicates that the command should wait until the Core service is fully restarted for the specified period of time in seconds before canceling active jobs. |
Example:
Restart the Core service:
>cmdutil /restartcoreservice -core 10.10.127.42 -user admin -password 676df#df -cancelactivejobs true -wait 600
RestoreAgent
The restoreagent command lets you restore a protected machine or volume from a specific Rapid Recovery recovery point.
Usage
The usage for the command is as follows:
/restoreagent -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [name] -targetvolume [volume name] -forcedismount -autorestart
Command Options
The following table describes the options available for the restoreagent command:
Table 63: RestoreAgent command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-protectedserver |
The name or IP address of the server you want to restore. |
-rpn |
The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps. |
-volumes |
The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all. |
-targetmacchine |
The name of the machine to which you want to restore the protected machine. |
-targetvolume |
The name or ID of the volume to which you want to restore the machine. |
-forcedismount |
Optional. Use this option to force the dismount of the database on demand. |
-autorestart |
Optional. Use this command if restarting an Exchange Server machine is necessary. |
Example:
Restore a machine to a protected machine with the IP address 192.168.20.130, including the force database dismount option:
>cmdutil /restoreagent -protectedserver 192.168.20.130 -rpn 259 -volumes "F:" "E:" "C:" -targetmachine 192.168.20.174 -targetvolume "E:" "G:" "F:" -forcedismount
RestoreArchive
This command restores an archive from a local archive or share and places the restored data in a specified repository.
Usage
The usage for the command is as follows:
/restorearchive -core [host name] -user [user name] -password [password] -all | -protectedserver [name | IP address] -repository [name] -archiveusername [name] -archivepassword [password] -path [location]
Command Options
The following table describes the options available for the restorearchive command:
Table 64: RestoreArchive command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-all |
Restore data for all protected machines from the archive files. |
-protectedserver |
Protected machine with recovery points to restore. You can specify several machine names enclosed in double quotes and separated by spaces. |
-repository |
Name of a repository on the Core to which the restored recovery points should be placed. The name must be enclosed in double quotes. |
-archiveusername |
Optional. User name for the remote machine. Required for network path only. |
-archivepassword |
Optional. Password to the remote machine. Required for network path only. |
-path |
Location of the archived data to be restored; for example: d:\work\archive or network path \\servename\sharename. |
Examples:
Restore archived data for all protected servers:
>cmdutil /restorearchive -core 10.10.10.10 -username administrator -password 23WE@#$sdd -all -repository repository1 -path d:\work\archive
Restore archived data for specific protected servers:
>cmdutil /restorearchive -core 10.10.10.10 -username administrator -password 23WE@#$sdd -protectedserver “10.10.20.30” “20.10.10.5” -repository repository1 -path d:\work\archive
