立即与支持人员聊天
与支持团队交流

Rapid Recovery 6.10 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-MigrateAgent Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

ProtectHyperVServer

The protecthypervserver command adds a Hyper-V server under protection by a Core using agentless protection.

Usage

The usage for the command is as follows: 

/protecthypervserver -core [host name] -user [user name] -password [password] -repository [name] -server [name | IP address] -serverusername [user name] -serverpassword [password] -serverport [port] -virtualmachines [virtual machines collection | all] -isagentprotection

Command Options

The following table describes the options available for the protecthypervserver command:

Table 53: ProtectHyperVServer command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-repository
 Name of a repository on the Core to which the protected machine data should be stored. The name must be enclosed in double quotes. 
-server
 Name or IP address of the Hyper-V server that you want to protect. 
-serverusername
 User name for the Hyper-V server to be protected. 
-serverpassword
 Password for the Hyper-V server to be protected. 
-serverport
 Optional. Protected Hyper-V server port number. 
-virtualmachines
 Optional. List of virtual machines to protect. Values must be enclosed in double quotes and separated by a space. If you exclude this parameter, only the Hyper-V cluster container is protected.

Example:

Protect specific virtual machines of a Hyper-V server: 

>cmdutil /protecthypervserver -core 10.10.10.10 -username admin -password password -repository “Repository 1” -server 10.10.8.150 -serverport 443 -serverusername root clusterpassword password -virtualmachines “VM1” "VM2"

RemoveAgent

The RemoveAgent command lets you remove a protected machine from the protection of a Core and optionally delete the recovery points of the removed machine. If you do not delete the recovery points, Rapid Recovery retains and labels them as a recovery points only machine.

Usage

The usage for the command is as follows: 

/removeagent -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -deleterecoverypoints

Command Options

The following table describes the options available for the RemoveAgent command:

Table 54: RemoveAgent command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-protectedserver
 The name or IP address of the server you want to remove from protection. 
-deleterecoverypoints
 Optional. Deletes all recovery points for the machine you want to remove.

Example:

Remove a machine from protection and delete the associated recovery points: 

>cmdutil /removeagent -protectedserver 10.10.1.1 -deleterecoverypoints

RemoveArchiveRepository

You can use the removearchiverepository command to delete a repository from the Rapid Recovery Core.

Usage

The usage for the command is as follows: 

/removearchiverepository -core [host name] -user [user name] -password [password] name] -name [archive repository name]

Command Options

The following table describes the options available for the removearchiverepository command:

Table 55: RemoveArchiveRepository command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-name
 Required. The name of the archive repository.

Examples:

Remove the repository named "NewArchive" from the local Core: 

>cmdutil /removearchiverepository -name NewArchive

RemovePoints

The removepoints command lets you delete specific recovery points of a protected machine.

Usage

The usage for the command is as follows: 

/removepoints -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -rpn [number | numbers] | -time [time string]

Command Options

The following table describes the options available for the removepoints command:

Table 56: RemovePoints command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-protectedserver
 The name or IP address of the server for which you want to delete recovery points 
-rpn
 Optional. The sequential number of a recovery point to be deleted (use /list rps command to get the numbers). Specify several space-separated numbers to delete multiple recovery points with a single command. 
-time
 Optional. Determines which recovery point or points to delete by creation time. Specify the exact time in the format "mm/dd/yyyy hh:mm tt" (for example, "2/24/2012 09:00 AM"). Keep in mind to specify the date time values of the time zone set on your PC.

Example:

Delete the recovery points with number 5 and 7: 

>cmdutil /removepoints -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -rpn 5 7
相关文档
Rapid Recovery - 6.10
Commands and Scripting Reference Guide
Installation and Upgrade Guide
Release Notes
System Requirements Guide
User Guide
Showing 1 to 5 of 5 rows

The document was helpful.

选择评级

I easily found the information I needed.

选择评级