The Edit-ExcludedFilesAndFolders
cmdlet lets you change the list of path that you want Rapid Recovery to ignore during backup for the specified machine.
The usage for the command is as follows:
/editexcludedfilesandfolders -core [host name] -user [user name] -password [password name] -protectedserver [name | IP address] -addpath | -removepath [excluded paths collection] -addvolume | -removevolume [excluded volumes collection]]
The following table describes the options available for the Edit-ExcludedFilesAndFolders
command:
Option | Description |
---|---|
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.
If none are provided, then the logged-on user's credentials will be used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.
If none are provided, then the logged-on user's credentials will be used. |
-protectedserver |
Use this option to edit the vCenter or ESXi objects for a specific protected machine. |
-addpath |
Optional. Add specific files or folders to the list of paths to ignore. |
-addvolume |
Optional. Add a specific volume to the list of paths to ignore. |
-removepath |
Optional. Remove specific files or folders from the list of paths to ignore. |
-removevolume |
Optional. Remove a specific volume from the list of paths to ignore. |
Add paths to the exclusion list for the machine 10.10.8.150:
>Edit-ExcludedFileAandFolders -protectedserver 10.10.8.150 -addpath "*.exe" "*.avi" -addvolume "\Hard disk 1\Volume1"
Remove path from the exclusion list for the machine 10.10.8.150:
>Edit-ExcludedFileAandFolders -protectedserver 10.10.8.150 -removepath "*.exe" "*.avi" -removevolume "\Hard disk 1\Volume1"
The Edit-HyperVClusterProtectionRules
cmdlet lets you edit the protection rules for a specified Hyper-V server.
The usage for the command is as follows:
Edit-HyperVClusterProtectionRules -protectedserver [name | IP address] -protectionrules [protection rule names collection | all | none]
The following table describes the options available for the Edit-HyperVClusterProtectionRules
command:
Option | Description |
---|---|
-? |
Display this help message. |
-protectedserver |
Use this option to edit the rules for a specific protected Hyper-V cluster. |
-protectionrules |
Use a comma to separate a list of protection rules to add or remove. Supported protection rules include:
Common protection rules settings include:
|
Set the ProtectAgentlessly and ProtectPairedToAnotherCore porotection rules to 'true' for the server 10.10.10.10, making all other rules 'false:'
>Edit-HyperVClusterProtectionRules -protectedserver 10.10.10.10 -protectionrules ProtectAgentlessly, ProtectPairedToAnotherCore
The Edit-HyperVServerProtectionRules
cmdlet lets you edit the protection rules for a specified Hyper-V server.
The usage for the command is as follows:
Edit-HyperVServerProtectionRules -protectedserver [name | IP address] -protectionrules [protection rule names collection | all | none]
The following table describes the options available for the Edit-HyperVServerProtectionRules
command:
Option | Description |
---|---|
-? |
Display this help message. |
-protectedserver |
Use this option to edit the rules for a specific protected machine. |
-protectionrules |
Use a comma to separate a list of protection rules to add or remove. Supported protection rules include:
Common protection rules settings include:
|
Set the ProtectAgentlessly and ProtectPairedToAnotherCore porotection rules to 'true' for the server 10.10.10.10, making all other rules 'false:'
>Edit-HyperVServerProtectionRules -protectedserver 10.10.10.10 -protectionrules ProtectAgentlessly, ProtectPairedToAnotherCore
The Edit-HyperVVirtualStandby
command lets you use PowerShell to make changes to an existing virtual export to a Hyper-V virtual machine (VM).
The usage for the command is as follows:
Edit-HyperVVirtualStandby [-HostName <String>] [-HostPort <String>] [-HostUserName <String>] [-HostPassword <String>] [-VMLocation <String>] [-UseLocalMachine] [-gen2] [-UseVhdx] [-ProtectedServer <String>] [-Volumes <String[]>] [-VMName <String>] [-UseSourceRam] [-Ram <String>] [-User <String>] [-Core <String>] [-Password <String>] [-Verbose] [-Debug] [-ErrorAction <ActionPreference>] [-WarningAction <ActionPreference>] [-ErrorVariable <String>] [-WarningVariable <String>] [-OutVariable <String>] [-OutBuffer <Int32>]
The following table describes the options available for the Edit-HyperVVirtualStandby
command:
Option | Description |
---|---|
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.
If none are provided, then the logged-on user's credentials will be used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.
If none are provided, then the logged-on user's credentials will be used. |
-protectedserver |
Show jobs for a specific protected machine, indicated by IP address. |
-all |
Show all jobs, including those performed by the Core and all protected servers. |
-number |
Optional. Determine how many records to display. available values are:
all (display all jobs); l[number] or [number] (fetches ## most recent jobs sorted by execution and time); f[number] (displays first ## recovery jobs sorted by execution and time). By default, the 20 most recent jobs are shown. |
-jobtype |
Optional. Specifies the job type filter. Available values are: 'transfer' (data transfer), 'repository' (repository maintenance), 'replication' (local and remote replications), 'backup' (backup and restore), 'bootcdbuilder' (create boot CDs), 'diagnostics' (upload logs), 'exchange' (Exchange Server files check), 'export' (recovery point export), 'pushinstall' (deploy agents), 'rollback' (restoring from a recovery point), 'rollup' (recovery point rollups), 'sqlattach' (agent attachability checks), and 'mount' (mount repository). By default, all jobs of the specified type are returned. |
-time |
Optional. Filter output by date and time for the job started. Available types of input include:
#d or DD (where # is a number for the period of time of days before now until now) #h or #H (where # is number for the period of hours before now until now) “time date 1”, “time date 2” (to show a custom range of time from a specific date appearing before the comma to a specific date following the comma). |
Lists all active jobs on the local Core:
>Get-activejobs –all
© ALL RIGHTS RESERVED. Terms of Use Privacy Cookie Preference Center