The restoreurc command lets you restore a protected machine or volume from a specific Rapid Recovery recovery point to a bare-metal machine using the Universal Recovery Console (URC).
The usage for the command is as follows:
/restoreurc -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [IP address] -urcpassword [password from the URC] -targetdisk [disk number | all]
The following table describes the options available for the restoreurc command:
| Option | Description |
|---|---|
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-protectedserver |
The name or IP address of the server you want to which you want to restore the URC. |
-rpn |
The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps. |
-volumes |
The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all. |
-targetmacchine |
The name of the machine to which you want to restore the protected machine. |
-urcpassword |
The authentication key from the URC. |
-targetdisk |
The numbers of the disks on which you want to restore the machine. To select all disks from the machine using the URC, use -targetdisk all. |
Restore a machine to disks 0 and 1 of the machine using the URC, when the IP address for the URC machine is 192.168.20.175:
>cmdutil /restoreurc -protectedserver 192.168.20.130 -rpn 259 -volumes "C:" "E:" -targetmachine 192.168.20.175 -urcpassword ******** -targetdisk 0 1
The administrator can use this command to resume snapshots, export to a virtual machine, and replicate. You must specify your need to resume by a parameter. The following parameters are valid: snapshot, vmexport, and replication. See Pause for more details.
The usage for the command is as follows:
/resume [snapshot | vmexport | replication] -core [host name] -user [user name] -password [password] -all | -protectedserver [name | IP address] -incoming [host name] | outgoing [host name] -time [time string]
The following table describes the options available for the resume command:
| Option | Description |
|---|---|
-? |
Display this help message. |
-restore |
[snapshots], [replication] or [vmexport]. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-all |
Resume all agents on the selected Core. |
-protectedserver |
Resume current protected server. |
-incoming |
Host name of the remote core that replicates to the core machine. |
-outgoing |
Host name of the remote target core to which data is replicated. |
Resume snapshots for specific protected server:
>cmdutil /resume snapshot -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.10.4
Resume export to a virtual machine for all protected machines on the core:
>cmdutil /resume vmexport –core 10.10.10.10 -user administrator -password 23WE@#$sdd -all
Resume outgoing replication on the core for a specific protected machine:
>cmdutil /resume replication -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.1.76
Resume outgoing replication for all protected machines on the target core:
>cmdutil /resume replication -core 10.10.10.10 -user administrator -password 23WE@#$sdd -outgoing 10.10.1.63
Resume incoming replication for all machines on the target core:
>cmdutil /resume replication -core 10.10.10.10 -user administrator -password 23WE@#$sdd -incoming 10.10.1.82
This command lets you resume the task scheduler it has been paused.
The usage for the command is as follows:
/resumescheduler -core [host name] -user [user name] -password [password]
The following table describes the options available for the resumescheduler command:
| Option | Description |
|---|---|
-? |
Display this help message. |
-restore |
[snapshots], [replication] or [vmexport]. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
Resume snapshots for specific protected server:
>cmdutil /resumescheduler -core 10.10.127.42 -user admin -password 676df#df
You can use a seed drive for the initial data transfer when you establish Rapid Recovery replication.
The usage for the command is as follows:
/seeddrive [-list | -startcopy | -startconsume | -abandon] -path [local | network path] -seeddriveusername [user name] -seeddrivepassword [password] -remotecore [name] [-targetcore [name or IP] | -protectedserver [name] | -all] -usecompatibleformat
The following table describes the options available for the seeddrive command:
| Option | Description |
|---|---|
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-list |
The list of outstanding seed drives with extended information. |
-startcopy |
Start copying data to the seed drive. |
-startconsume |
Start consuming the seed drive. |
-abandon |
Abandon the outstanding seed drive request. |
-path |
The local or network path of the seed drive. |
-seeddriveusername |
Optional. The user name for the network location of the seed drive. |
-seeddrivepassword |
Optional. The password for the network location of the seed drive. |
-targetcore |
Optional. Use only with the -copy option. It is the name or IP address of the remote Core. All protected machines replicating to this Core receive seed drive recovery points. |
-remotecore |
Use only with the -consume option. It is the name of the remote Core from which the seed drive recovery points are created or consumed. |
-protectedserver |
The name or IP address of the protected machine you are using to create or consume the seed drive of recovery points. For example: -protectedserver "10.10.60.48" "10.10.12.101." |
-all |
This option specifies whether to consume or copy all of the available protected machines. |
-usecompatibleformat |
The new archiving format offers improved performance, however it is not compatible with older Cores. Use this option when working with a legacy AppAssure Core.
Confirm with dev. |
List outstanding seed drives:
>cmdutil /seeddrive -list
Copy two protected machines to the seed drive on the network share:
>cmdutil /seeddrive -startcopy -remotecore TargetCoreName -path \\10.10.1.1\Share\Seed\ -seeddriveusername Administrator -seeddrivepassword 12345 -usecompatibleformat
Starting consuming the seed drive:
>cmdutil /seeddrive -startconsume -path \\10.10.1.1\Share\Seed\ -seeddriveusername Adminsitrator -seeddrivepassword 12345 -remotecore RemoteCoreName
Abandon an outstanding seed drive request:
>cmdutil /seeddrive -abandon RemoteCoreHostName
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Terms of Use Privacy Cookie Preference Center
