To connect the BMR target machine to the Rapid Recovery Core Console or to use Chromium for downloading additional drivers, you must first load an Ethernet controller and network adapter. For more information, see Loading drivers using the Universal Recovery Console.
- On the BMR target machine, load the boot CD image from the appropriate location, and then start the server from the boot CD image to load Win PE 10 and the Universal Recovery Console (URC) environment.
The target machine displays a blue Quest screen with three URC function buttons at the top of the screen.
- To start the URC user interface, from the buttons at the top of the screen, click (Start URC).
The URC splash screen appears, and you are prompted to choose a display language.
- From the language drop-down menu, select a display language and click OK.
The Universal Recovery Console appears. The URC applies network settings, starts Rapid Recovery Agent, and searches the boot CD image for available drivers.
- On the right side of the console, under Authentication, If the IP address does not appear, the target machine cannot find the appropriate network adapter. Stop this task, and perform one of the tasks described in the topic Loading drivers using the Universal Recovery Console.
- On the right side of the console, under Authentication, if the IP address of the target machine populates, you also see a single-use password.
NOTE: If you specified an IP address in the Create Boot CD dialog box, the Universal Recovery Console displays that IP address in the Authentication area.
- If you want to change the IP address, do the following:
- To the right of the IP address, click (Change).
The Change network adapter settings dialog box appears.
- Enter the appropriate IP address, completing values in IP address, gateway, subnet mask, and DNS server areas as appropriate.
- When satisfied, click OK.
The Change network adapter settings dialog box closes, and the new IP address appears in the Authentication area. - To the right of the IP address, click (Change).
- If you want to keep this IP address, record the authentication information. You will use it to connect the URC to the Rapid Recovery Core Console.