Integration Guide for Quest� QoreStorTM
This guide contains proprietary information protected by copyright. The software described in this guide is furnished under a software license or nondisclosure agreement. This software may be used or copied only in accordance with the terms of the applicable agreement. No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording for any purpose other than the purchaser’s personal use without the written permission of Quest Software Inc.
The information in this document is provided in connection with Quest Software products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Quest Software products. EXCEPT AS SET FORTH IN THE TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR THIS PRODUCT, QUEST SOFTWARE ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL QUEST SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF QUEST SOFTWARE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Quest Software makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Quest Software does not make any commitment to update the information contained in this document.
If you have any questions regarding your potential use of this material, contact:
Quest Software Inc.
Attn: LEGAL Dept.
4 Polaris Way
Aliso Viejo, CA 92656
Refer to our website (https://www.quest.com) for regional and international office information.
Quest Software is proud of our advanced technology. Patents and pending patents may apply to this product. For the most current information about applicable patents for this product, please visit our website at https://www.quest.com/legal.
Quest, the Quest logo, Foglight, NetVault, vRanger, and Join the Innovation are trademarks and registered trademarks of Quest Software Inc. vCenter, vSphere, vMotion, VMware, and ESXi are registered trademarks or trademarks of VMware, Inc. in the United States and/or other jurisdictions. Active Directory, Hyper-V, SharePoint, SQL Server, Windows, and Windows Server are registered trademarks of Microsoft Corporation in the United States and/or other countries. Data Domain and DD Boost are trademarks or registered trademarks of EMC Corporation in the United States and other countries. For a complete list of Quest marks, visit https://www.quest.com/legal/trademark-information.aspx. All other trademarks and registered trademarks are property of their respective owners.
vRanger Integration Guide for Quest� QoreStorTM
Updated - July 2021
Software Version - 7.8.3
• vRanger integration quick start for Quest� QoreStor�
vRanger integration quick start for Quest� QoreStor�
Integrating vRanger with QoreStor is achieved by adding the QoreStor instance to vRanger as a Quest Rapid Data Access (RDA) repository. The following steps describe the integration process at a high level, and provide links to the remaining topics for more exploration. Before implementing this solution in a production environment, read this information thoroughly.
1 Confirm integration requirements: Before starting the integration, confirm that you are using supported versions of vRanger and QoreStor. For more information, see Product requirements for integration.
2 Install and configure QoreStor: To install QoreStor and integrate with vRanger, perform the following operations:
▪ Install the QoreStor software: Download and install the QoreStor software onto a designated, properly configured server.
▪ Create a storage container: Containers function like a shared file system, which can be assigned a connection type of None (to be defined later), NFS/CIFS, or RDA (includes Rapid Data Storage [RDS] clients). Containers can then be accessed using Network File System (NFS), Common Internet File System (CIFS), or RDA.
3 Install vRanger: Using the vRanger installer, install vRanger on a machine meeting the vRanger system requirements. For a high-level overview of the vRanger installation process, see Installing vRanger. For more information, see the Quest vRanger Installation/Upgrade Guide.
4 Create a Quest RDA repository: After vRanger is installed, add the QoreStor server to vRanger as a Quest RDA repository. Any backup written to this repository is deduplicated according to your QoreStor configuration.
Product requirements for integration
To integrate vRanger with QoreStor, you must be using one of the following supported product versions:
▪ 7.7 or later — for RDA, CIFS, and NFS integration
▪ Refer to the QoreStor Interoperability Guide.
The following topics provide an overview of vRanger and QoreStor, and important information about the licensing required to integrate the two products.
What is vRanger?
vRanger is the leading VMware� data protection solution that also backs up and recovers Windows� physical servers and files with blazing speed and minimal storage requirements. With vRanger, you get comprehensive protection for both virtual and physical environments that you can manage from one intuitive interface.
For virtual machine (VM) backup, a license for vRanger controls the number of source CPUs that you can configure for backup. For licensing purposes, a multi-core processor is counted as a single CPU. For physical backup, each server protected consumes one physical backup license.
Every VMware� ESXi� host for which vRanger is expected to provide protection must be properly licensed, both by VMware and in the vRanger Host Licensing tab.
Quest QoreStor is a software-defined secondary storage platform based on Quest’s proven DR Appliance’s resilient deduplication and replication technologies. With QoreStor, you can break free of backup appliances and accelerate backup performance, reduce storage requirements and costs, and replicate safer and faster to the cloud for data archiving, disaster recovery and business continuity.
Lower costs and maximize the return on your IT investment by leveraging virtually any storage hardware, virtualization platform or cloud provider. QoreStor also supports many backup software solutions — so it’s not just for Quest. Simple to deploy and easy to manage, QoreStor enables you to shrink replication time, improve data security and address compliance requirements.
• Reduce on-premises and cloud storage costs with industry-leading deduplication and compression.
• Accelerate backup completion with protocol accelerators and dedupe.
• Shrink replication time by transmitting only changed data.
• Improve data security and comply with FIPS 140-2.
• Maximize return on investment for existing data protection technologies.
• Lower total cost of ownership through all-inclusive licensing.
• vRanger integration quick start for Quest� QoreStor�
vRanger integration quick start for Quest� QoreStor�
Integrating vRanger with QoreStor is achieved by adding the QoreStor instance to vRanger as a Quest Rapid Data Access (RDA) repository. The following steps describe the integration process at a high level, and provide links to the remaining topics for more exploration. Before implementing this solution in a production environment, read this information thoroughly.
1 Confirm integration requirements: Before starting the integration, confirm that you are using supported versions of vRanger and QoreStor. For more information, see Product requirements for integration.
2 Install and configure QoreStor: To install QoreStor and integrate with vRanger, perform the following operations:
▪ Install the QoreStor software: Download and install the QoreStor software onto a designated, properly configured server.
▪ Create a storage container: Containers function like a shared file system, which can be assigned a connection type of None (to be defined later), NFS/CIFS, or RDA (includes Rapid Data Storage [RDS] clients). Containers can then be accessed using Network File System (NFS), Common Internet File System (CIFS), or RDA.
3 Install vRanger: Using the vRanger installer, install vRanger on a machine meeting the vRanger system requirements. For a high-level overview of the vRanger installation process, see Installing vRanger. For more information, see the Quest vRanger Installation/Upgrade Guide.
4 Create a Quest RDA repository: After vRanger is installed, add the QoreStor server to vRanger as a Quest RDA repository. Any backup written to this repository is deduplicated according to your QoreStor configuration.
Product requirements for integration
To integrate vRanger with QoreStor, you must be using one of the following supported product versions:
▪ 7.7 or later — for RDA, CIFS, and NFS integration
▪ Refer to the QoreStor Interoperability Guide.
The following topics provide an overview of vRanger and QoreStor, and important information about the licensing required to integrate the two products.
What is vRanger?
vRanger is the leading VMware� data protection solution that also backs up and recovers Windows� physical servers and files with blazing speed and minimal storage requirements. With vRanger, you get comprehensive protection for both virtual and physical environments that you can manage from one intuitive interface.
For virtual machine (VM) backup, a license for vRanger controls the number of source CPUs that you can configure for backup. For licensing purposes, a multi-core processor is counted as a single CPU. For physical backup, each server protected consumes one physical backup license.
Every VMware� ESXi� host for which vRanger is expected to provide protection must be properly licensed, both by VMware and in the vRanger Host Licensing tab.
Quest QoreStor is a software-defined secondary storage platform based on Quest’s proven DR Appliance’s resilient deduplication and replication technologies. With QoreStor, you can break free of backup appliances and accelerate backup performance, reduce storage requirements and costs, and replicate safer and faster to the cloud for data archiving, disaster recovery and business continuity.
Lower costs and maximize the return on your IT investment by leveraging virtually any storage hardware, virtualization platform or cloud provider. QoreStor also supports many backup software solutions — so it’s not just for Quest. Simple to deploy and easy to manage, QoreStor enables you to shrink replication time, improve data security and address compliance requirements.
• Reduce on-premises and cloud storage costs with industry-leading deduplication and compression.
• Accelerate backup completion with protocol accelerators and dedupe.
• Shrink replication time by transmitting only changed data.
• Improve data security and comply with FIPS 140-2.
• Maximize return on investment for existing data protection technologies.
• Lower total cost of ownership through all-inclusive licensing.
• vRanger integration quick start for Quest� QoreStor�
vRanger integration quick start for Quest� QoreStor�
Integrating vRanger with QoreStor is achieved by adding the QoreStor instance to vRanger as a Quest Rapid Data Access (RDA) repository. The following steps describe the integration process at a high level, and provide links to the remaining topics for more exploration. Before implementing this solution in a production environment, read this information thoroughly.
1 Confirm integration requirements: Before starting the integration, confirm that you are using supported versions of vRanger and QoreStor. For more information, see Product requirements for integration.
2 Install and configure QoreStor: To install QoreStor and integrate with vRanger, perform the following operations:
▪ Install the QoreStor software: Download and install the QoreStor software onto a designated, properly configured server.
▪ Create a storage container: Containers function like a shared file system, which can be assigned a connection type of None (to be defined later), NFS/CIFS, or RDA (includes Rapid Data Storage [RDS] clients). Containers can then be accessed using Network File System (NFS), Common Internet File System (CIFS), or RDA.
3 Install vRanger: Using the vRanger installer, install vRanger on a machine meeting the vRanger system requirements. For a high-level overview of the vRanger installation process, see Installing vRanger. For more information, see the Quest vRanger Installation/Upgrade Guide.
4 Create a Quest RDA repository: After vRanger is installed, add the QoreStor server to vRanger as a Quest RDA repository. Any backup written to this repository is deduplicated according to your QoreStor configuration.
Product requirements for integration
To integrate vRanger with QoreStor, you must be using one of the following supported product versions:
▪ 7.7 or later — for RDA, CIFS, and NFS integration
▪ Refer to the QoreStor Interoperability Guide.
The following topics provide an overview of vRanger and QoreStor, and important information about the licensing required to integrate the two products.
What is vRanger?
vRanger is the leading VMware� data protection solution that also backs up and recovers Windows� physical servers and files with blazing speed and minimal storage requirements. With vRanger, you get comprehensive protection for both virtual and physical environments that you can manage from one intuitive interface.
For virtual machine (VM) backup, a license for vRanger controls the number of source CPUs that you can configure for backup. For licensing purposes, a multi-core processor is counted as a single CPU. For physical backup, each server protected consumes one physical backup license.
Every VMware� ESXi� host for which vRanger is expected to provide protection must be properly licensed, both by VMware and in the vRanger Host Licensing tab.
Quest QoreStor is a software-defined secondary storage platform based on Quest’s proven DR Appliance’s resilient deduplication and replication technologies. With QoreStor, you can break free of backup appliances and accelerate backup performance, reduce storage requirements and costs, and replicate safer and faster to the cloud for data archiving, disaster recovery and business continuity.
Lower costs and maximize the return on your IT investment by leveraging virtually any storage hardware, virtualization platform or cloud provider. QoreStor also supports many backup software solutions — so it’s not just for Quest. Simple to deploy and easy to manage, QoreStor enables you to shrink replication time, improve data security and address compliance requirements.
• Reduce on-premises and cloud storage costs with industry-leading deduplication and compression.
• Accelerate backup completion with protocol accelerators and dedupe.
• Shrink replication time by transmitting only changed data.
• Improve data security and comply with FIPS 140-2.
• Maximize return on investment for existing data protection technologies.
• Lower total cost of ownership through all-inclusive licensing.
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Feedback Terms of Use Privacy Cookie Preference Center