vRanger 7.6.3 - User Guide

Update-BackupJobTemplate

Update-BackupJobTemplate

 

Description	Updates a backup job template. You also have the option of running the job immediately after the template is updated.
Syntax	Update-BackupJobTemplate [‑JobTemplate] <BackupJobTemplate> [[‑JobName] <String>] [[‑JobDescription] <String>] [[‑ExcludedVMList] <String>] [[‑IncludedDiskList] <String>] [[‑TargetRepository] <Repository>] [[‑JobSchedule] <Schedule>] [[‑Flags] <NoFlags | BackupPoweredOnOnly | CheckDestinationFreeSpace | UseCompression | UpdateNotes | EnableGuestQuiescing | EnableABM | UseFiber | PerformNetworkBackupOnFailure | UseCataloging | AllFlags>] [[‑NumberOfSavePoints] <Int>] [[‑SpaceSavingTechnologyTypeFlag] <None | Incremental | Differential>] [[‑SpaceSavingCountThreshold] <Int>] [[‑SpaceSavingPercentSizeThreshold] <Int>] [[‑NotificationList] <String>] [[‑RunJobNow] <Boolean>] [[‑TransportConfiguration] <TransportConfiguration>] [<CommonParameters>]
Parameters	• JobTemplate <BackupJobTemplate>: Existing job template. • JobName [<String>]: Job name. • JobDescription [<String>]: Job description. • ExcludedVMList [<String>]: List of VMs to exclude from this job. • IncludedDiskList [<String>]: List of virtual disks to include in this job. • TargetRepository [<Repository>]: Repository where the backups are to be stored. • JobSchedule [<Schedule>]: Schedule on which the job runs. • Flags [<Nullable`1>]: Backup flags. • NumberOfSavePoints [<String>]: Max number of savepoints to store before older ones are removed. • SpaceSavingTechnologyTypeFlag [<String>]: Space saving technology to use: differential, incremental, or none. • SpaceSavingCountThreshold [<String>]: The number to save before performing a full backup. • SpaceSavingPercentSizeThreshold [<String>]: The size to allow as a % of the VM hard disk file before performing a differential backup. • NotificationList [<String>]: Email notification list for the job. • RunJobNow [<Boolean>]: Whether to run the job now. • TransportConfiguration [<TransportConfiguration>]: The transport configuration options to use for this job. • FullBackupSchedule [<List~1>]: The days to perform a full backup. • <CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters".
Examples	get-jobtemplate backup |where{$_.jobname ‑eq 'my first backup job'}| Update-BackupJobTemplate ‑JobName 'modified by vapi' This command adds a backup job template. Because the RunJobNow flag is not specified, the job is not going to run immediately.
Related links	Add-BackupJobTemplate Get-Job Get-JobTemplate

Update-GlobalTransportFailover

Update-GlobalTransportFailover

 

Description	Updates the default Transport Failover order for replication jobs.
Syntax	Update-GlobalTransportFailover [‑TransportFailover] <String> [<CommonParameters>]
Parameters	• TransportFailover <String>: Transport Failover order separated by commas to be attempted until the task is successful. Valid types are VA-HotAdd and VA-Network. • <CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"
Examples	Update-GlobalTransportFailover ‑TransportFailover VA‑Network This command updates the default Transport Failover order for replication jobs.
Related links	Get-GlobalTransportFailover Get-TransportFailover

Update-HypervRestoreJobTemplate

Update-HypervRestoreJobTemplate

 

Description	Updates a restore job template. You also have the option of running the job immediately after the template is updated.
Syntax	Update-HypervRestoreJobTemplate [‑JobTemplate] <RestoreJobTemplate> [‑JobName] <String> [[‑JobDescription] <String>] [‑SavePoint] <Savepoint> [[‑JobSchedule] <Schedule>] [[‑Flags] <NoFlags | ForceOverwrite | ForcePowerOn | UseFiber | PerformNetworkRestoreOnFailure | AddHypervVirtualMachineToCluster | AllFlags>] [[‑NotificationList] <List`1>] [[‑RunJobNow] <Boolean>] [[‑VMName] <String>] [[‑TargetHost] <String>] [[‑VmLocation] <String>] [[‑SkipDisks] <List`1>] [[‑DiskLocations] <List`1>] [[‑TargetNetworks] <List`1>] [[‑SkipAdapters] <List`1>] [<CommonParameters>]
Parameters	• JobTemplate <RestoreJobTemplate>: Restore job template to update. • JobName <String>: Job name. • JobDescription [<String>]: Job description. • SavePoint <Savepoint>: Savepoint to restore. • JobSchedule [<Schedule>]: Schedule on which the job runs. If not set, the job runs on demand. • Flags [<Nullable`1>]: Restore flags. If not set, the job has no flags. • NotificationList [<List`1>]: Separate multiple email addresses with commas. • RunJobNow [<Nullable`1>]: Whether to run the job now. If not set, the job does not run immediately after creation of the template. • VMName [<String>]: Name of the restored VM. If not set, the VM name in the savepoint is used. • TargetHost [<String>]: Fully qualified domain name or IP address of the target host. • VmLocation [<String>]: Location on target host where the restored VM is located. If not set, the default for the host is used. • SkipDisks [<List`1>]: Sequence number — base 0 — of the disks to skip from the savepoint. Separate multiple numbers with commas. • DiskLocations [<List`1>]: Disk locations to use on the target host. Separate multiple values with commas. If only one is supplied, it is used for all disks on the VM If not set, the default disk location for the host is used for all disks. • TargetNetworks [<List`1>]: Networks to use on the target host. Separate multiple values with commas. If only one network name is provided, it is used for all adapters on the VM. If not set, the original networks are used when restoring to the original VM. • SkipAdapters [<List`1>]: Sequence number — base 0 — of the adapters to skip in the restore job. Separate multiple numbers with commas. • <CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, ‑WarningAction, ‑WarningVariable, ‑OutBuffer, and ‑OutVariable. For more information, type: "get-help about_commonparameters"
Examples	--------------------EXAMPLE 1-------------------- $repo = get-repository |where{$_.name ‑eq 'local'} $spList = get-repositorysavepoint $repo.id $mysp = ($spList)[1] Add-RestoreJobTemplate ‑Jobname vapirestore ‑Savepoint $mysp This command creates a restore job template that restores to the original VM in the savepoint. The job runs on-demand. --------------------EXAMPLE 2-------------------- $repo = get-repository |where{$_.name ‑eq 'local'} $sp = get-repositorysavepoint $repo.id $mysp = ($sp)[0] $targethost = get-inventoryentities ‑type HypervHost | where{$_.name ‑eq 'dev015.dev.eng.int'} $targetDiskLocation = 'c:\hyper-virtual hard disks $targetnw = get-network ‑host $targethost|where{$_.Name ‑eq 'Virtual Machine Network'} Add-RestoreJobTemplate ‑jobname vapirestore_totaraget ‑savepoint $mysp ‑targethost $targethost.name ‑DiskLocations $targetDiskLocation ‑VmLocation 'c:\hyper-v\configuration' ‑targetnetworks $targetnw.name This command creates a restore job template that restores to the specified target host. It also specifies disk location, vm location, and the network to use on the target host.
Examples (continued)	--------------------EXAMPLE 3-------------------- $repo = get-repository |where{$_.name ‑eq 'local'} $sp = get-repositorysavepoint $repo.id $mysp = ($sp)[0] $targethost = get-inventoryentities ‑type HypervHost | where{$_.name ‑eq 'dev015.dev.eng.int'} $targetDiskLocation = 'c:\hyper-virtual hard disks $targetnw = get-network ‑host $targethost|where{$_.Name ‑eq 'Virtual Machine Network'} $skipdisks = '0' Add-RestoreJobTemplate ‑jobname vapirestore_skipdisk ‑savepoint $mysp ‑targethost $targethost.name ‑DiskLocations $targetDiskLocation ‑VmLocation 'c:\hyper-v\configuration' ‑targetnetworks $targetnw.name ‑SkipDisks $skipdisks This command creates a restore job template that restores to the specified target host. The first disk (0) in the savepoint is skipped by the restore job. --------------------EXAMPLE 4-------------------- $repo = get-repository |where{$_.name ‑eq 'local'} $sp = get-repositorysavepoint $repo.id $mysp = ($sp)[0] $targethost = get-inventoryentities ‑type EsxHost | where{$_.name ‑eq 'dev015.dev.eng.int'} $targetDiskLocation = 'c:\hyper-virtual hard disks $targetnw = get-network ‑host $targethost|where{$_.Name ‑eq 'Virtual Machine Network'} $skipnetworks = '0' Add-RestoreJobTemplate ‑jobname vapirestore_skipdisk ‑savepoint $mysp ‑targethost $targethost.name ‑DiskLocations $targetDiskLocation ‑VmLocation 'c:\hyper-v\configuration' ‑targetnetworks $targetnw.name ‑Skipadapters $skipnetworks This command creates a restore job template that restores to the specified target host. The first adapter of the VM in the savepoint is skipped by the restore job.
Related links	Add-BackupJobTemplate Add-RdaRepository Update-RestoreJobTemplate Get-Job Get-JobTemplate

Update-Inventory

Update-Inventory

 

Description	Refreshes the inventory.
Syntax	Update-Inventory [<CommonParameters>]
Parameters	<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"
Examples	This command refreshes the inventory.
Related links	None