Rapid Recovery 6.9 - User Guide

The protecting procedure requires the following tasks be completed before you begin:

• The Rapid Recovery Agent has been deployed and installed on the machine you want to protect.
• The machine you want to protect was restarted after the Agent installation.
• A repository has been created and is accessible from the Rapid Recovery Core.

Use this procedure to manually specify details for multiple machines that you want to protect simultaneously using the Agent software. The details identify each machine on the network uniquely, and include connection information and credentials. This approach is often used when protecting Linux machines. However, using this process, you can protect only Windows machines, only Linux machines, or a combination of both.

1. From the Rapid Recovery Core Console button bar, click the Protect drop-down menu, and then select Protect Multiple Machines.

   The Protect Multiple Machines Wizard opens.

2. On the Welcome page, select one of the follow installation options:
   • If you do not need to define a repository or establish encryption, select Typical.
   • If you want to define a repository or if you want to establish encryption, select Advanced (show optional steps).

     Optionally, if you do not wish to see the Welcome page for the Protect Machine Wizard in the future, select the option Skip this Welcome page the next time the wizard opens.

3. Click Next.
4. On the Connection page of the wizard, from the Source drop-down list, select Manually.
5. Click Next.
6. On the Select Machines page, for each machine you want to protect, enter the machine details in the dialog box. Press Enter to separate information for each machine you want to add. Use the format hostname::username::password::port. The port setting is optional. The default port for installing Agent on Windows machines is 8006. For Linux machines, the default port is number 22 (SSH port). Examples include:

   10.255.255.255::administrator::&11@yYz90z

   Linux-host-00-2::administrator::p@$$w0rD::22

7. Click Next.

   If the Protection page appears next in the Protect Multiple Machines Wizard, skip to step 11.

   If the Agent software is not yet deployed to the machines you want to protect, or if any of the machines you specified cannot be protected for another reason, then the selected machines appear on the Warnings page.

8. Optionally, on the Machines Warnings page, you can verify any machine by selecting the machine and then clicking Verify in the toolbar.
9. Optionally, on the Machines Warnings page, select After Agent installation, restart the machines automatically.

   Caution: Quest recommends this option. You must restart agent machines before they can be protected. Restarting ensures that the Agent service is running, and that proper kernel module is used to protect the machine, if relevant.

10. If the status indicates that the machine is reachable, click Next to install the Agent software.

    The Protection page appears.

11. Optionally, on the Protection page, if you want a name other than the IP address to display in the Rapid Recovery Core Console for this protected machine, then in the Display name field, type a name in the dialog box.

    You can enter up to 64 characters. Do not use the special characters described in the topic prohibited characters. Additionally, do not begin the display name with any of the character combinations described in the topic prohibited phrases.

12. Select the appropriate protection schedule settings as described below:
    • To use the default protection schedule, in the Schedule Settings option, select Default protection (hourly snapshots of all volumes).

      With a default protection schedule, the Core will take snapshots of all volumes on the protected machine once every hour. To change the protection settings at any time after you close the wizard, including choosing which volumes to protect, go to the Summary page for the specific protected machine.

    • To define a different protection schedule, in the Schedule Settings option, select Custom protection.

      Schedule options are added to the wizard workflow.

13. Proceed with your configuration as follows:
    • If you selected a Typical configuration for the Protect Machine Wizard in step 2 and specified default protection, then click Finish to confirm your choices, close the wizard, and protect the machine you specified.
    • If you selected Advanced configuration for the Protect Machine Wizard in step 2, and default protection, then click Next to see repository and encryption options.
    • If you selected a Typical configuration for the Protect Machine Wizard and specified custom protection, then click Next and continue to step 14 to choose which volumes to protect.
    • If you selected Advanced configuration for the Protect Machine Wizard in step 2, and default protection, then click Next and proceed to step 16 to see repository and encryption options.
14. On the Protection Volumes page, select which volumes you want to protect. If any volumes are listed that you do not want to include in protection, click in the Check column to clear the selection. Then click Next.

    NOTE: Typically, it is good practice to protect, at minimum, the System Reserved volume and the volume with the operating system (typically the C drive).

15. On the Protection Schedule page, define a custom protection schedule and then click Next. For details on defining a custom protection schedule, see Creating custom protection schedules in Simple Mode.
16. On the Repository page, select the repository you want to use to store recovery points for this machine, and then click Next.
17. On the Encryption page, do one of the following:
    • If you want to use encryption keys for data stored in the repository, select Encrypt the data at rest in a repository, and then do one of the following:
      • To select an existing encryption key to apply to all new data stored in your repository, select Encrypt data using Core-based encryption with an existing key, and from the Select encryption key drop-down menu, select the encryption key.
      • To define a new encryption key at this time to apply to all future data stored in your repository, select Encrypt data using Core-based encryption with a new key, and then enter information about the key as described in the table below:

      Table 64: Define new encryption key

      Text Box	Description
      Name	Enter a name for the encryption key. Encryption key names must contain between 1 and 64 alphanumeric characters. Do not use prohibited characters or prohibited phrases.
      Description	Enter a descriptive comment for the encryption key. This information appears in the Description field when viewing a list of encryption keys in the Rapid Recovery. Descriptions may contain up to 254 characters. Best practice is to avoid using prohibited characters and prohibited phrases.
      Passphrase	Enter a passphrase used to control access. Best practice is to avoid using prohibited characters. Record the passphrase in a secure location. Quest Data Protection Support cannot recover a passphrase. Once you create an encryption key and apply it to one or more protected machines, you cannot recover data if you lose the passphrase.
      Confirm passphrase	Re-enter the passphrase. It is used to confirm the passphrase entry.

    • If you want to encrypt all data that transports over a network, select Encrypt the data in transport over a network.

      NOTE: This option is enabled by default, so if you do not want to encrypt data in this fashion, clear this option.

18. Click Finish to save and apply your settings.

    NOTE: The first time protection is added for a machine, a base image (that is, a snapshot of all the data in the protected volumes) transfers to the repository indicated in your Rapid Recovery Core following the schedule you defined, unless you specified that the Core should initially pause protection. For information on pausing and resuming protection, see Pausing and resuming protection.