The Database Analysis drilldown displays key performance statistics for all active databases and database partitions in an instance. At its top level, the drilldown provides an overview of performance during the current monitoring session. This is shown in the Databases tab.
From the Databases tab, you can drill down to detailed information on caching, sorting, locking, I/O activity, and more for a certain database or partition. This is shown in sub drilldown tabs, which are displayed in the lower half of the window when a database or partition is selected. The additional statistics can be used to diagnose any problems detected in the Databases tab.
The steps below outline the basic workflow involved in using the Database Analysis drilldown.
To use the Database Analysis drilldown
View top level tabs to detect problems in a database. Work from the Databases tab to check statistics. Work from Criteria tab to filter the list in the Database tab based on criteria such as level of physical I/O or number of locks held.
View Rows in the Databases tab in the Tablespaces tab to focus on a certain database or one of its partitions. Check columns in the Databases tab to see statistics for a database or partition.
View sub drilldown tabs to see additional statistics for a certain database. Click the database row to display the tabs. The information they contain can help you diagnose problems detected in the Databases tab.
Open a Toad for DB2 or session to view properties, update configuration parameters, or identify storage problems for a specific database or database partition. (You must have either product licensed and installed on the same computer where the Spotlight for DB2 client resides.)
As you view drilldowns, you can filter them based on criteria specified in the Criteria tab. This is available for the following drilldowns: Database Analysis, Tablespace Analysis, Buffer Pool Analysis, Client Application Analysis, and Diagnostic Log.
Filtering lets you narrow the scope of the list shown in a drilldown. You can use it to focus on objects with a certain level of activity, certain attributes, or a certain current state. For example, you might filter a drilldown to see databases with the greatest I/O, tablespaces with the most direct writes, buffer pools with the lowest hit ratio, or applications that are currently connected.
Criteria for a drilldown can include multiple filters. The more filters you create, the narrower the scope of the drilldown list. Only items that meet filter criteria are shown. All others are filtered out. If no objects meet filter criteria, "No Data" is shown in the drilldown.
Filtering applies to the current database and current session. It is not saved when the session ends.
Note: When filtering is in use, an asterisk is shown beside the name of a drilldown's list tab. For example, when filtering is in use for the Tablespace Analysis drilldown, Tablespaces* is shown at the top of the Tablespaces tab.
Follow the procedure below to specify filter criteria. Before you create or modify filters, review the columns shown in the drilldown. The columns you can select for a filter are the ones currently displayed. If you want to filter on columns that are not currently displayed, select those columns in the Column Organizer. To open this window, right click any column header and select Organize Columns... from the right-click menu.
Note: The first filter you create determines which values are shown in the Value list box for the next filter. For example, if your first filter specifies "Content = Large" and you select the Extent Size column for the next filter, the Value list box shows extent sizes for tablespaces with the Large content type. If you want to use an extent size that is not listed, enter it in the Value list box.
To specify filter criteria
Click the Criteria tab for a drilldown.
If you plan to use multiple filters in criteria, select an option from the Result Set will include list box as follows:
|
Any |
Select this option if the result set should include items that meet criteria for one or more filters. Items are included even if they do not meet criteria for all filters. |
|
All |
Select this option if the result set should include items that meet criteria for all filters. Items are included only if they meet criteria for all filters. |
Specify criteria for a filter as follows:
|
a. |
Column |
From this list box, select a column for the filter. Objects are checked against values in this column. The list includes all columns currently displayed in the drilldown. |
|
b. |
Operator |
From this list box, select a comparison operator for column values. The choices are = (equal to), <> (less than and greater than), > (greater than), and < (less than). Use the = (equal to)operator for a column that shows an attribute such as status, name, or ID. |
|
c . |
Value |
From this list box, select the column value for the filter. In most cases, the values shown are for entire objects. Values for partitions are not listed. If a value for an entire object is not shown, you can enter it manually. Objects are checked to see if their values are equal to, less than and/or greater than this value (depending on the operator selected). |
Click Add to add the filter to the Active Filters list.
Repeat steps 3 and 4 for each filter you want to create.
To remove a filter from the Active Filters list, select it in the list, then click Remove. To remove all filters from the list, click Remove All.
Tip: To change the value for an active filter, remove the filter from the Active Filters list. Then create a new filter with the same column but a different value.
When you finish specifying filter criteria, click the information tab for a drilldown. The tab lists objects that meet filter criteria.
Welcome to Spotlight on IBM DB2 LUW (Linux, Unix, and Windows). The help topics in this book cover features available in the interface when Spotlight is connected to a version 9 database.
Spotlight is a powerful database monitoring and diagnostic tool. Its unique user interface provides you with an intuitive, visual representation of the activity on the DB2 databases and database partitions that you choose to monitor. Graphical flows and line and fill graphs illustrate the activity on and between database components. Icons display the value of key statistics. Using the Spotlight browser, you can switch your monitoring focus between the various databases and partitions. Additionally, you can view activity at the DB2 instance level for any of these systems.
The power of Spotlight lies in its ability to provide visual and audible warnings if the performance metrics exceed acceptable thresholds. The components and dataflows on the home page change color to show you the source of the problem.
A range of reports and graphs provide you with detailed information about a DB2 database, database partition, or the instance to which the database belongs. This information can be viewed on the screen or be printed.
You can set Spotlight options to warn you when a threshold is reached. You can define a number of thresholds so that warning messages are displayed well before the traffic levels into or out of databases become critical.
Spotlight uses a number of different techniques to warn you when your DB2 instance or a database is exceeding a threshold. For example, to issue a warning, you can configure Spotlight to change a color on the home page or drilldown, provide an audible signal, or perform an action, such as send an email message.
The Details tab on the Database Analysis drilldown provides the following:
Identification information for the selected database
Key statistics that provide an overview of database activities.
The following lists the details and statistics that appear on the Details tab for the selected database or database partition. Click a specific detail for its description.
The Database Times graph provides a visual overview of the amount of time spent on various processing events for the database or database partition. The times are displayed in seconds.
© ALL RIGHTS RESERVED. 이용 약관 개인정보 보호정책 Cookie Preference Center
