• United States (English)
• Brazil (Português)
• China (中文)
• France (Français)
• Germany (Deutsch)
• Italy (Italiano)
• Japan (日本語)
• Korea (한국어)
• Mexico (Español)

• 로그인
• 지원 계정 생성

무료 트라이얼

• 포털 전문가 되기
• 인쇄
• 내 다운로드 ()

• 지원
• 기술 문서
• Foglight APM for Real User Experience 5.9.11
• Foglight APM for Real User Experience 5.9.11 - Installation and Setup Guide

Foglight APM for Real User Experience 5.9.11 - Installation and Setup Guide

콘텐츠 탐색  

Installation overview

Introducing the monitoring architecture

Software components

Foglight Management Server Archiver Sniffer Browser Instrumentation Relayer Archiver databases

Ports used by Foglight APM

Appliance types Typical monitoring solutions

Monitoring physical networks Monitoring virtual networks Mixing physical and virtual appliances Adding Foglight APM to an existing Foglight installation

Installing physical appliances

Before you begin

Physical appliance components Other network components required Anatomy of an appliance

Planning an installation of physical appliances

Public network switch Private network switch for the capture subnet Network taps

Monitoring individual web servers Monitoring web server farms

Network information required for physical appliances

Installing appliances on a network rack Connecting appliances to the network Connecting Sniffers

Connecting Sniffers to network taps Connecting Sniffers to Archivers

Connecting one Sniffer to one Archiver Connecting Sniffers to Archivers

Starting physical appliances and configuring remote access Launching the Console Program remotely with DRAC

Installing virtual appliances

Monitoring multiple ESXi hosts

Monitoring multiple hosts through a centralized Sniffer Monitoring multiple hosts using local Sniffers Mixing virtual and physical appliances Scaling out a multiple host configuration Installing virtual appliances to monitor multiple hosts

Monitoring a single ESXi host

All-on-one-host variation Scalability Installing virtual appliances to monitor a single host

Before you begin

Software environment Foglight APM OVF templates Required port groups RAID configuration Network information for virtual appliances

Creating port groups on virtual switches

Configuring port groups on a distributed switch

Creating a Monitoring Network port group required by Sniffers Creating the Capture Network port group required by Sniffers and Archivers Creating a virtual adapter for the Capture Network port group

Configuring port groups on a standard switch

Deploying Foglight virtual templates Deploying the Foglight virtual Sniffer template Connecting virtual appliances on different servers Powering on virtual appliances

Setting up appliances

Logging in to the Console Program Enabling SSH and changing the default password Setting the date and time Specifying network settings Exiting the Console Program Launching Foglight Configuring software components

Working with appliance-hosted Management Servers

Configuring Management Server settings Configuring the Management Server to work with SSL keys

Creating a new SSL key for Foglight HTTPS access Using an existing SSL key for Foglight HTTPS access Configuring Foglight for secure remote LDAP access

Restricted file access Transferring support files from a physical appliance

Transferring files to Windows systems Transferring files to Linux systems

Troubleshooting appliance-hosted Management Servers Differences from working with server-hosted Management Servers

Setting up server-hosted Management Servers

Server requirements

Downloading and installing 256-bit encryption files Disabling the NetBIOS over TCP/IP setting

Installing Foglight APM cartridges Communicating with Sniffer and Archiver appliances Configuring Federated Children Enabling High Availability mode

Maintaining appliances

Launching the Console Program

Accessing physical appliances using SSH on Microsoft Windows systems Accessing physical appliances using SSH on UNIX systems

List of tasks available from the main menu Managing user accounts

Adding new user accounts Modifying user accounts and enabling SSH Removing user accounts

Modifying the time zone, time, or date Modifying the list of NTP servers for physical appliances Modifying network settings Shutting down appliances Rebooting appliances Updating software

Upgrading from a PKG file Displaying the upgrade log

Testing network settings Stopping and starting processes Reviewing the appliance system details and health status Reviewing the status of NIC devices Verifying monitored traffic by port Purging and resetting Archiver databases Creating support bundles Creating TCP dump files Accessing the home directory Creating Dell report archives on physical appliances

Backing up and restoring physical appliances

Setting up appliances as NetVault clients

Enabling an appliance's NetVault client Registering an appliance in NetVault

Running and restoring backups

Stopping Foglight and running a backup Restoring backups

Preparing a new appliance Restoring a backup

Appendix: Troubleshooting

Diagnosing Sniffer issues

Overview of the Sniffer test Running the Sniffer test Investigating and resolving issues in monitored traffic

Understanding packet drops with SPAN ports and aggregation network taps Expanding full partitions on virtual appliances

Expanding the size of virtual disks Expanding the size of partitions

• Viewing Topics 125 - 128 of 137

×

Stopping Foglight and running a backup

You use the appliance’s Console Program to stop the Management Server. After the processes stop, you use NetVault™ to back up the file system. The Database Repository is automatically backed up as part of this process.

 

IMPORTANT: Before you begin, ensure that the appliance is registered as a NetVault client. For instructions, see Setting up appliances as NetVault clients.

To stop processes and run a backup of an appliance:

1	Log in to the original appliance’s Console Program.

2	Select Advanced Options, and then Stop All Processes.

The Console Program shuts down all running processes on the appliance.

3	After the processes stop, launch the NetVault web UI and complete the following steps:

a	Create a device used for the backup as follows:

a	Click Guided Configuration, and then click Add Storage Devices.

The NetVault Storage Configuration Wizard appears in the display area.

b	Select Virtual tape library / media changer, and then click Next.

c	Select the machine that you wish to include the virtual library, and then click Next.

d	Specify the following two fields, and keep the default value for the remaining fields, and then click Next.

•	Choose the location on disk where you wish to create the new device

•	Specify the media capacity (in GiB)

b	Create and run a backup job as follows:

a	Click Guided Configuration, and then click Create backup jobs.

The Create Backup Job wizard appears in the display area.

b	In the Job Name field, specify a name for the file system backup.

c	Click Create New next to Selections. The NetVault Backup Selections wizard appears.

Expand the branch: <appliance_name>/File System/opt/quest/foglight.

d	Keep the default value for Plugin Options, Schedule, Target Storage, and Advanced Options.

e	Click Save & Submit.

A message confirms that the job was submitted successfully, and the backup begins.

To monitor the status of the backup, click Job Status under Monitoring. When the job is finished, close the Status window.

4	Return to the Console Program and restart processes on the appliance.

Restoring backups

You can restore a backup to the original appliance (where the backup was taken) or to a newly-imaged appliance. If you are restoring a backup to a newly-imaged appliance, start with Preparing a new appliance. Otherwise, skip to Restoring a backup.

 

CAUTION: Never restore a backup of one appliance onto another in-service appliance in your environment. The Foglight data that is restored on that appliance would be out of sync with the Archiver database associated with the appliance.

Preparing a new appliance

To prepare a new appliance:

1	If the new appliance does not have the Management Server, see Foglight APM on Dell™ PowerEdge™ R730 Appliance Imaging Field Guide.

2	Install the new appliance in your network and configure it as described in the Foglight APM Installation and Setup Guide.

 

NOTE: The appliance IP address and host name can be anything, that is, they do not have to be the same as the appliance where the backup was taken.

3	Enable the NetVault client on the new appliance as described in Enabling an appliance’s NetVault client.

4	Do one of the following:

•	If the new appliance has a different IP address and host name than the original appliance, register the new appliance on the NetVault server as described in Registering an appliance in NetVault.

•	If the new appliance has the same IP address and host name as the original appliance, ensure that you can connect to it from NetVault. In the NVBU Client Management window, click the appliance’s icon in the Clients list and select Check Access.

You are now ready to restore a backup on the new appliance.

Restoring a backup

You start by preparing the target appliance for a NetVault™ restore from the appliance’s Console Program. As part of this process, Foglight is shut down. Next you restore the backup from NetVault. When the restore job is complete, you restart the appliance.

 

CAUTION: Following this procedure deletes any existing configuration settings and data under /opt/quest/foglight on the appliance, and replaces it with the restored file system and Database Repository.

To restore a backup:

1	Log in to the target appliance’s Console Program.

2	Select Advanced Options, and then More Advanced Options.

3	Select Prepare for NetVault Restore.

4	On the Prepare for NetVault Restore screen, select Yes to proceed with the operation.

5	Launch the NetVault web UI and complete the following steps:

a	Click Create Restore Job.

The Create Restore Job page appears in the display area.

b	Select the backup that you want to restore, and then click Next.

c	Expand the branch and ensure /opt/quest/foglight is selected, and then click Next.

d	In the Job Name field, specify a name for the restore job.

e	Click Create New next to Selections. The Create Selection Set wizard appears.

Expand the branch: <appliance_name>/File System/opt/quest/foglight.

f	Click the Target Client tab, and select the target appliance.

g	Keep the default value for Schedule, Source Options, and Advanced Options.

h	Click Save & Submit.

A message confirms that the job was submitted successfully, and the restore begins.

To monitor the status of the restore job, click Job Status under Monitoring. When the job is finished, close the Status window.

6	Return to the Console Program, and do one of the following:

•	If the Console Program is still active, click OK to confirm an appliance restart.

•	If it timed out, log into the Console Program and select Shutdown to reboot the appliance.

7	After the appliance finishes restarting, exit the Console Program and log in to the Foglight browser interface to validate that the data has been restored.

The restore process is complete.

 

 

•  이전
• Viewing Topics 125 - 128 of 137
• 다음 

이 문서 검색 모든 문서 검색

×

 지원 시작

계열사 지원 사이트에서 Quest *제품*에 대한 온라인 지원 도움말을 볼 수 있습니다. 올바른 *제품* 지원 콘텐츠 및 지원에 연결하려면 계속을 클릭하십시오.

관련 문서

The document was helpful.

평가 결과 선택

I easily found the information I needed.

평가 결과 선택