Chatee ahora con Soporte
Chat con el soporte

Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

Scripting

Rapid Recovery enables administrators to automate the administration and management of resources at certain occurrences through the execution of commands and scripts. The Rapid Recovery software supports the use of PowerShell scripting for Windows and Bourne shell and Bash scripting for Linux.

Core jobs are automatically created whenever you initiate operations on the Rapid Recovery Core such as replication, virtual export, or a backup transfer. You can extend these jobs by running a script before it or after it. These are known as pre and post scripts.

This section describes the scripts that can be used by administrators at designated occurrences in Rapid Recovery for Windows and Linux.

Caution: The sample PowerShell and shell scripts provided in this document will function when run as designed by qualified administrators. Take precautions when modifying functioning scripts to retain working versions. Any modifications to the script samples included here, or any scripts you create, are considered customization, which is not typically covered by Quest Support.

Using PowerShell scripting with Rapid Recovery

Windows PowerShell is a Microsoft .NET Framework-connected environment designed for administrative automation. Rapid Recovery includes comprehensive client software development kits (SDKs) for PowerShell scripting that lets administrative users run user-provided PowerShell scripts at designated occurrences; for example, before or after a snapshot, attachability and mountability checks, and so on. Administrators can run scripts from both the Rapid Recovery Core and the protected machine. Scripts can accept parameters, and the output of a script is written to Core and protected machine log files.

Note: For nightly jobs, preserve one script file and the JobType input parameter to distinguish between nightly jobs.

Script files are located in the %ALLUSERSPROFILE%\AppRecovery\Scripts folder.

  • In Windows 7, the path to locate the %ALLUSERSPROFILE% folder is: C:\ProgramData.
  • In Windows 2003, the path to locate the folder is: Documents and Settings\All Users\Application Data\.
    Note: Windows PowerShell is required and must be installed and configured before running Rapid Recovery scripts.

For more information on how using PowerShell scripts see Sample PowerShell scripts, Input Parameters for PowerShell Scripting, Input parameters for shell scripting, and Sample shell scripts.

Prerequisites for PowerShell scripting

Before running PowerShell scripts for Rapid Recovery, you must have Windows PowerShell 2.0 or later installed. Due to new features introduced in PowerShell 3.0, including easier access to object properties, PowerShell Web access, and support for REST calls, Quest recommends using PowerShell 3.0 or later.

Note: Place the powershell.exe.config file in the PowerShell home directory. For example, C:\WindowsPowerShell\powershell.exe.config.

powershell.exe.config

<?xml version="1.0"?>
<configuration>
	<startup useLegacyV2RuntimeActivationPolicy="true">
		<supportedRuntime version="v4.0.30319"/>
		<supportedRuntime version="v2.0.50727"/>
	</startup>
</configuration>

Testing PowerShell Scripts

If you want to test the scripts you plan to run, you can do so by using the PowerShell graphical editor, powershell_is. You also need to add the configuration file powershell_ise.exe.config to the same folder as the configuration file powershell.exe.config.

Note: The configuration file powershell_ise.exe.config must have the same content as the powershell.exe.config file.
Caution: If the pre-PowerShell or post-PowerShell script fails, the job also fails.

Localization

When running on the same machine on which Rapid Recovery Core is installed, the Rapid Recovery PowerShell module bases its display language on the language set for the Core. Localized Rapid Recovery versions such as this one support English, Chinese (Simplified), French, Korean, German, Japanese, Portuguese (Brazil), and Spanish.

For Non-English releases, use: Rapid Recovery Core release 6.1.1 is an English-only release. As a result, English is the only language supported for the PowerShell Module. AppAssure release 6.0.2 is the most recent localized version of the Core software. In that release, supported languages include English, Chinese (Simplified), French, Korean, German, Japanese, Portuguese (Brazil), and Spanish.
If the Rapid Recovery PowerShell module is installed on a separate machine, English is the only language supported.

Qualifiers

The following table describes the qualifiers available for Rapid Recovery PowerShell Module.

Table 198: Rapid Recovery PowerShell module qualifiers
Qualifier Usage
-core <Rapid Recovery Core Name>
Host name of the Core.

Default: Localhost

-ProtectedServer <Protected Server Name>
Host name/IP address of the Rapid Recovery Agent.

Default: Localhost if multiple servers protected, otherwise the single server protected.

-Mode <READ, READWRITE, WRITE>
Recovery Point Mount mode.

Default: Read.

-Volumes <Snapshot Volume Letter>
Snapshot volume letter from Rapid Recovery Agent.

Default: All.

-User <User Name>
User name used to connect to the Rapid Recovery Core.

This is typically the service user.

-Domain <Domain Name>
Domain to which the user defined in /User belongs.
-Password <Password>
Password of the user defined in /User.
-Path <Target path to mount, dismount recovery points or archive location>
For example: C:\RapidRecoveryMount.

Input Parameters for PowerShell Scripting

All available input parameters are used in sample scripts. The parameters are described in the following tables.

Note: Script files must possess the same name as the sample script files.

AgentProtectionStorageConfiguration (namespace Replay.Common.Contracts.Agents)

The following table presents the available objects for the AgentProtectionStorageConfiguration parameter.

Table 199: Objects for the AgentProtectionStorageConfiguration parameter
Method Description
public Guid RepositoryId { get; set; } Gets or sets the ID of the repository where the agent recovery points are stored.
public string EncryptionKeyId { get; set; } Gets or sets the ID of the encryption key for this agent's recovery points. An empty string means no encryption.

AgentTransferConfiguration (namespace Replay.Common.Contracts.Transfer)

The following table presents the available objects for the AgentTransferConfiguration parameter.

Table 200: Objects for the AgentTransferConfiguration parameter
Method Description
public uint MaxConcurrentStreams { get; set; } Gets or sets the maximum number of concurrent TCP connections the Core establishes to the agent for transferring data.
public uint MaxTransferQueueDepth { get; set; } Gets or sets the maximum number of block extents which can be queued for writing. When a range of blocks are read from a transfer stream, that range is placed on a producer or consumer queue, where a consumer thread reads it and writes it to the epoch object. If the repository writes slower than the network reads, this queue fills up. The point at which the queue is full and reads stop is the maximum transfer queue depth.
public uint MaxConcurrentWrites { get; set; } Gets or sets the maximum number of block write operations to have outstanding on an epoch at any given time. If additional blocks are received beyond the maximum number of write operations specified in this parameter, those additional blocks are ignored until one of the outstanding writes finishes.
public ulong MaxSegmentSize { get; set; } Gets or sets the maximum number of contiguous blocks to transfer in a single request. Depending on testing, higher or lower values may be optimal.
public Priority Priority { get; set; } Gets or sets the priority for transfer request.
public uint GetChangedBlocksRetries { get; set; } Gets or sets the count of retries if initial retrieval of changed blocks from the agent failed.
public int MaxRetries { get; set; } Gets or sets the maximum number of times a failed transfer should be retried before it is presumed failed.
public bool UseDefaultMaxRetries { get; set; } If included, the default maximum number of retries (specified in transfer configuration) will be used.
public Guid ProviderId{ get; set; } Gets or sets the GUID of the VSS provider to use for snapshots on this host. Administrators typically accept the default.
public Collection<ExcludedWriter> ExcludedWriterIds { get; set; } Gets or sets the collection of VSS writer IDs that should be excluded from this snapshot. The writer ID is determined by the name of the writer. This name is for documentation purposes only, and does not necessarily provide an exact match of the writer name.
public ushort TransferDataServerPort { get; set; } Gets or sets a value containing the TCP port upon which to accept connections from the Core for the actual transfer of data from the protected machine to the Core. The Agent attempts to listen on this port, but if the port is in use, the protected machine can use a different port instead. The Core should use the port number specified in the BlockHashesUri and BlockDataUri properties of the VolumeSnapshotInfo object for each snapped volume.
public TimeSpan CleanSnapshotTimeout { get; set; } Gets or sets the amount of time to wait for cleaning up the snapshot after transfer is finished.
public TimeSpan SnapshotTimeout { get; set; } Gets or sets the amount of time to wait for a VSS snapshot operation to complete before giving up and timing out.
public TimeSpan TransferTimeout { get; set; } Gets or sets the amount of time to wait for further contact from the Core before abandoning the snapshot.
public TimeSpan NetworkReadTimeout { get; set; } Gets or sets the timeout for network read operations related to this transfer.
public TimeSpan NetworkWriteTimeout { get; set; } Gets or sets the timeout for network write operations related to this transfer.
public uint InitialQueueSize { get; set; } Gets or sets a size of initial queue or requests.
public uint MinVolumeFreeSpacePercents { get; set; } Gets or sets a minimal amount of free space on a volume, measured by percentage. If free space is lower than the amount specified in this parameter, then all change logs are deleted and a base image is forced.
public uint MaxChangeLogsSizePercents { get; set; } Gets or sets a maximum size of driver change logs as part of volume capacity, measured by percentage. If part of change logs is bigger than this value, then all change logs are deleted and a base image is forced.
public bool EnableVerification { get; set; } Gets or sets a value indicating whether diagnostic verification of each block sent to Core should be performed.

BackgroundJobRequest (namespace Replay.Core.Contracts.BackgroundJobs)

The following table presents the available objects for the BackgroundJobRequest parameter.

Table 201: Objects for the BackgroundJobRequest parameter
Method Description
public AgentIdsCollection AgentIds { get; set; } Gets or sets the IDs of the protected machines.
public bool IsNightlyJob { get; set; } Gets or sets the value indicating whether the background job is a nightly job.
public Guid NightlyJobTransactionId { get; set; } Gets or sets the ID of nightly job transaction.
public Guid JobId { get; set; } Gets or sets the ID of background job.
public bool Force { get; set; } Gets or sets the value indicating if a job was forced.
public uint JobStartsCount { get; set; } Gets or sets the number of attempts to start a job.
public virtual bool InvolvesAgentId(Guid agentId) Determines the value indicating whether the concrete agent is involved in job.

ChecksumCheckJobRequest (namespace Replay.Core.Contracts.Exchange.ChecksumChecks)

Inherits its values from the parameter, DatabaseCheckJobRequestBase.

DatabaseCheckJobRequestBase (namespace Replay.Core.Contracts.Exchange)

Inherits its values from the parameter, BackgroundJobRequest.

Table 202: Objects for the DatabaseCheckJobRequestBase parameter
Method Description
public string RecoveryPointId { get; set; } Gets or sets the ID of the recovery point for which databases will be checked.

ExportJobRequest (namespace Replay.Core.Contracts.Export)

Inherits its values from the parameter, BackgroundJobRequest.

The following table presents the available objects for the ExportJobRequest parameter.

Table 203: Objects for the ExportJobRequest parameter
Method Description
public uint RamInMegabytes { get; set; } Gets or sets the memory size for the exported VM. Set to zero (0) to use the memory size of the source machine.
public ushort CpuCount { get; set; } Gets or sets the CPU count for the exported VM. Set to 0 to use the CPU count of the source machine.
public ushort CoresPerCpu { get; set; } Gets or sets the Cores per CPU count for the exported VM. Set to 0 to use the Cores per CPU count of the source machine.
public VirtualMachineLocation Location { get; set; } Gets or sets the target location for this export. This is an abstract base class.
public VolumeImageIdsCollection VolumeImageIds { get; private set; } Gets or sets the volume images to include in the VM export.
public ExportJobPriority Priority { get; set; } Gets or sets the priority for export request.

NightlyAttachabilityJobRequest (namespace Replay.Core.Contracts.Sql)

Inherits its values from the parameter, BackgroundJobRequest.

Table 204: Objects for the NightlyAttachabilityJobRequest parameter
Method Description
public int SimultaneousJobsCount { get; set; } Gets or sets count of jobs that can be run simultaneously.

RollupJobRequest (namespace Replay.Core.Contracts.Rollup)

Inherits its values from the parameter, BackgroundJobRequest.

TakeSnapshotResponse (namespace Replay.Agent.Contracts.Transfer)

The following table presents the available objects for the TakeSnapshotResponse parameter.

Table 205: Objects for the TakeSnapshotResponse parameter
Method Description
public Guid SnapshotSetId { get; set; } Gets or sets the GUID assigned by VSS to this snapshot.
public VolumeSnapshotInfoDictionary VolumeSnapshots { get; set; } Gets or sets the collection of snapshot info for each volume included in the snap.

TransferJobRequest (namespace Replay.Core.Contracts.Transfer)

Inherits its values from the parameter, BackgroundJobRequest.

The following table presents the available objects for the TransferJobRequest parameter.

Table 206: Objects for the TransferJobRequest parameter
Method Description
public VolumeNameCollection VolumeNames { get; set; } Gets or sets the collection of names for transfer.

VolumeNames is a data structure that contains the following data:

  • GuidName. The Guid associated with the volume, used as the name if a DisplayName is not set.
  • DisplayName. The displayed name of the volume.
public VolumeNameCollection TransferredVolumes { get; set; } Gets or sets the collection of transferred volumes.
public VolumeNameCollection DependentVolumeNames { get; set; } Gets or sets the collection of dependent volumes.
public QuotaSettingsCollection EnabledDiskQuotas { get; set; } Gets or sets quotas that are enabled on a volume.
public ShadowCopyType ShadowCopyType { get } Gets the type of copying for transfer. The available values are:
  • Copy
  • Full
public AgentTransferConfiguration TransferConfiguration { get; set; } Gets or sets the transfer configuration.

AgentTransferConfiguration is an object which will have the following data:

  • MaxConcurrentStreams. The maximum number of concurrent TCP connections the core will establish to the agent for transferring data
  • MaxTransferQueueDepth. The maximum number of block extents which can be queued up for writing
  • MaxConcurrentWrites. The maximum number of block write operations to have outstanding on an epoch at any given time. If additional blocks are received when this many block writes are outstanding, those additional blocks will be ignored until one of the outstanding blocks gets written.
  • MaxSegmentSize. The maximum number of contiguous blocks to transfer in a single request
  • Priority. An object which will have the following data:
    • Undefined
    • One
    • Two
    • Three
    • Four
    • Five
    • Six
    • Seven
    • Eight
    • Nine
    • Ten
    • Highest (which is equal to One)
    • Lowest (which is equal to Ten)
    • Default (which is equal to Five)
  • MaxRetries. The maximum number of times a failed transfer should be retried before it is presumed failed
  • UseDefaultMaxRetries. A value indicating that the maximum number of retries is the default value
  • ProviderId. The GUID of the VSS provider to use for snapshots on this host. Users typically use the default setting.
public AgentProtectionStorageConfiguration StorageConfiguration { get; set; } Gets or sets the storage configuration.
public string Key { get; set; } Generates a pseudorandom (but not cryptographically secure) key, which can be used as a one-time password to authenticate transfer requests.
public bool IsBaseImage { get; set; } Gets or sets value indicating whether base image will be taken.
public bool IsForced { get; set; } Gets or sets value indicating whether transfer has been forced.
public Guid ProtectionGroupId { get; set; } Gets or sets the ID of the protection group.
public TargetComponentTypes LogTruncationTargets { get; set; } Gets or sets value that indicates for which databases log truncation will be performed (SQL or Exchange).
public bool ForceBaseImage { get } Gets the value indicating whether the base image was forced or not.
public bool IsLogTruncation { get } Gets the value indicating whether the log truncation job is performing or not.

TransferPrescriptParameter (namespace Replay.Common.Contracts.PowerShellExecution)

Inherits its values from the TransferScriptParameterBase parameter.

TransferPostscriptParameter (namespace Replay.Common.Contracts.PowerShellExecution)

The following table presents the available objects for the TransferPostscript parameter. Inherits its value from the TransferScriptParameterBase parameter.

Table 207: Objects for the TransferPostscript parameter
Method Description
public VolumeNameCollection VolumeNames (get; set; ) Gets or sets the collection of volume names for transfer.

VolumeNames is a data structure that contains the following data:

  • GuidName. The Guid associated with the volume, used as the name if a DisplayName is not set.
  • DisplayName. The displayed name of the volume.
public ShadowCopyType ShadowCopyType { get; set; } Gets or sets the type of copying for transfer.ShadowCopyType is an enumeration with values. The available values are:
  • Unknown
  • Copy
  • Full
public AgentProtectionStorageConfigurationCommon StorageConfiguration { get; set; } Gets or sets the storage configuration.
public AgentTransferConfiguration TransferConfiguration { get; set; } Gets or sets the transfer configuration.

AgentTransferConfiguration is an object which will have the following data:

  • MaxConcurrentStreams. The maximum number of concurrent TCP connections the core will establish to the agent for transferring data
  • MaxTransferQueueDepth. The maximum number of block extents which can be queued up for writing
  • MaxConcurrentWrites. The maximum number of block write operations to have outstanding on an epoch at any given time. If additional blocks are received when this many block writes are outstanding, those additional blocks will be ignored until one of the outstanding blocks gets written.
  • MaxSegmentSize. The maximum number of contiguous blocks to transfer in a single request
  • Priority. An object which has the following data:
    • "Undefined
    • "One
    • "Two
    • "Three
    • "Four
    • "Five
    • "Six
    • "Seven
    • "Eight
    • "Nine
    • "Ten
    • "Highest (which is equal to One)
    • "Lowest (which is equal to Ten)
    • "Default (which is equal to Five)
  • MaxRetries. The maximum number of times a failed transfer should be retried before it is presumed failed
  • UseDefaultMaxRetries. A value indicating that the maximum number of retries is the default value
  • ProviderId. The GUID of the VSS provider to use for snapshots on this host. Administrators typically accept the default.
public AgentTransferConfiguration TransferConfiguration { get; set; } (cont.)
  • ExcludedWriterIds. Collection of VSS writer IDs which should be excluded from this snapshot. The writer ID is keyed by the name of the writer. This name is for documentation purposes only and does not have to exactly match the actual name of the writer.
  • TransferDataServerPort. A value containing the TCP port upon which to accept connections from the core for the actual transfer of data from the agent to the core.
  • SnapshotTimeout. The amount of time to wait for a VSS snapshot operation to complete before giving up and timing out.
  • TransferTimeout. The amount of time to wait for further contact from the core before abandoning the snapshot.
  • NetworkReadTimeout. The timeout for network read operations related to this transfer.
  • NetworkWriteTimeout. The timeout for network write operations related to this transfer.
  • InitialQueueSize. A size of initial queue of requests.
  • MinVolumeFreeSpacePercents. A minimal amount of free space on a volume in percent.
  • MaxChangeLogsSizePercents. A maximum size of driver change logs as part of volume capacity measured in percent.
  • EnableVerification. A value indicating whether diagnostic verification of each block sent to Core should be performed.
public AgentProtectionStorageConfiguration StorageConfiguration { get; set; } Gets or sets the storage configuration

The AgentProtectionStorageConfiguration object contains the following data:

  • RepositoryId. The name of the repository where this agent's recovery points will be stored
  • EncryptionKeyId. The ID of the encryption key for this agent's recovery points. An empty string means no encryption
public string Key { get; set; } The Key method generates a pseudorandom (but not cryptographically secure) key, which can be used as a one-time password to authenticate transfer requests.
public bool ForceBaseImage { get; set; } Gets or sets the value indicating whether the transfer was a forced base image capture.
public bool IsLogTruncation { get; set; } Gets or sets the value indicating whether logging is being truncated.
public uint LatestEpochSeenByCore { get; set; } Gets or sets latest epoch value.

The LatestEpochSeenByCore method is the ordinal number of the most recent snapshot taken by the Core. This is the 'epoch number' assigned by the filter driver to this particular snapshot at the moment it was taken with VSS.

public Guid SnapshotSetId { get; set; } Gets or sets the GUID assigned by VSS to this snapshot.
public VolumeSnapshotInfoDictionary VolumeSnapshots { get; set; } Gets or sets the collection of snapshot info for each volume included in the snapshot.

TransferScriptParameterBase (namespace Replay.Common.Contracts.PowerShellExecution)

The following table presents the available objects for the TransferScriptParameterBase parameter.

Table 208: Objects for the TransferScriptParameterBase parameter
Method Description
public AgentTransferConfiguration TransferConfiguration { get; set; } Gets or sets the transfer configuration.
public AgentProtectionStorageConfigurationCommon StorageConfiguration { get; set; } Gets or sets the storage configuration.

VirtualMachineLocation (namespace Replay.Common.Contracts.Virtualization)

The following table presents the available objects for the VirtualMachineLocation parameter.

Table 209: Objects for the VirtualMachineLocation parameter
Method Description
public string Description { get; set;} Gets or sets a human-readable description of this location.
public string Name { get; set;} Gets or sets the name of the VM.

VolumeImageIdsCollection (namespace Replay.Core.Contracts.RecoveryPoints)

Inherits its values from the parameter, System.Collections.ObjectModel.Collection<string>.

VolumeName (namespace Replay.Common.Contracts.Metadata.Storage)

The following table presents the available objects for the VolumeName parameter.

Table 210: Objects for the VolumeName parameter
Method Description
public string GuidName { get; set;} Gets or sets the ID of the volume.
public string DisplayName { get; set;} Gets or sets the name of the volume.
public string UrlEncode() Gets a URL-encoded version of the name which can be passed cleanly on a URL.
Note: A known issue exists in .NET 4.0 WCF (https://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=413312), which prevents path escape characters from working correctly in a URI template. Because a volume name contains both '\' and '?', you must replace the special characters '\' and '?' with other special characters.
public string GetMountName() Returns a name for this volume that is valid for mounting volume image to some folder.

VolumeNameCollection (namespace Replay.Common.Contracts.Metadata.Storage)

Inherits its values from the parameter, System.Collections.ObjectModel.Collection<VolumeName>.

The following table presents the available objects for the VolumeNameCollection parameter.

Table 211: Objects for the VolumeNameCollection parameter
Method Description
public override bool Equals(object obj) Determines whether this instance and a specified object, which must also be a VolumeNameCollection object, have the same value. (Overrides Object.Equals(Object).)
public override int GetHashCode() Returns the hash code for this VolumeNameCollection. (Overrides Object.GetHashCode().)

VolumeSnapshotInfo (namesapce Replay.Common.Contracts.Transfer)

The following table presents the available objects for the VolumeSnapshotInfo parameter.

Table 212: Objects for the VolumeSnapshotInfo parameter
Method Description
public Uri BlockHashesUri { get; set;} Gets or sets the URI at which the MD5 hashes of volume blocks can be read.
public Uri BlockDataUri { get; set;} Gets or sets the URI at which the volume data blocks can be read.

VolumeSnapshotInfoDictionary (namespace Replay.Common.Contracts.Transfer)

Inherits its values from the parameter, System.Collections.Generic.Dictionary<VolumeName, VolumeSnapshotInfo>.

Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación