Chatee ahora con Soporte
Chat con el soporte

Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

New-Repository

The New-Repository command creates a new DVM repository in the Rapid Recovery Core. The size specified must be between 250MB and 16TB.

Usage

The usage for the command is as follows:

New-Repository | –name [name] -size [size] -datapath [location] -metadatapath [location]

Command Options

The following table describes the options available for the New-Repository command:

Table 131: New-Repository command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used.
-name
Repository name.
-size
Size of repository extent. Available units are: b, Kb, MB, GB, TB, PB.
-datapath
For local location only. Determines data path of repository extent.
-metadatapath
For local location only. Determines metadata path of repository extent.
-uncpath
For share location only. Determines data and metadata paths of repository extent.
-shareusername
For share location only. Determines login to share location.
-sharepassword
For share location only. Determines password to share location.
-comment
Optional. Description of repository.
-concurrent
Operations
Optional. Maximum number of operations that can be pending at one time. Value by default: 64.

Example:

Create new DVM repository of minimum size in local drive E:

>New-Repository –name Repository2 -size 250Mb -datapath e:\Repository\Data -metadatapath e:\Repository\Metadata

New-ScheduledArchive

The New-ScheduledArchive command lets you use PowerShell to make changes to an existing scheduled archive.

Usage

The usage for the command is as follows:

New-ScheduledArchive -core [host name] -user [login] -password [password] -all | -protectedserver [name | IP address] -path [location] -archiveusername [name] -archivepassword [password] -cloudaccountname [name] -cloudcontainer [name] -recycleaction [type] -schdeuletype [type] -dayofweek [name] -dayofmonth [number] -time [time]

Command Options

The following table describes the options available for the New-ScheduledArchive command:

Table 132: New-ScheduledArchive command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-protectedserver
The protected machine with recovery points that you want to archive. You can specify multiple machine names enclosed in double quotes and separated by commas.
-all
Archive recovery points for all protected machines.
-path
The path to where to save the archived data. For example:
  • Local machine: "d:\work\archive"
  • Network path: "\\servername\sharename"
  • Folder in a cloud account: "Folder Name"
Note: The number of symbols should not be greater than 100 for local and network locations, and should not be greater than 150 for a cloud location.
-archiveusername
Optional. The user name for logging in to the remote machine. It is required for a network path only.
-archivepassword
Optional. The password for logging in to the remote machine. It is required for a network path only.
-cloudaccountname

Optional. Use only for cloud archiving. The name of the cloud account where you want to save the archive.

-cloudcontainer

Optional. Use only for cloud archiving. The name of the cloud container in the chosen cloud account, where the archive will be saved. When you use this option, you should also specify the "-cloudaccountname" parameter.

-recycleaction

The type of recycle action. Specified by using one of the following four values:

  • "replacethiscore" - Overwrites any pre-existing archived data pertaining to this Core, but leaves the data for other Cores intact.
  • "erasecompletely" - Clears all archived data from the directory before writing the new archive.
  • "incremental" - Lets you add recovery points to an existing archive. It compares recovery points to avoid duplicating data that already exists in the archive.
-scheduletype

Type of schedule interval. Specified the option with one of the following four values:

  • "daily" - For a daily automatically created archive.
  • "weekly" - For a weekly automatically created archive. You must specify the "-dayofweek" parameter.
  • "monthly" - For a monthly automatically created archive. You must specify the "-dayofmonth" parameter. If a month does not have the day specified—for example, "31"—then the archive will not occur for that month.
  • "lastdayofmonth" - For automatically creating an archive on the last day of each month.
-dayofweek

Use only for the "weekly" option of the "-scheduletype" parameter. The day of the week on which to automatically create the archive (for example, "Monday").

-dayofmonth

Use only for the "month" option of the "-scheduletype" parameter. The day (number) of the month on which to automatically create the archive (for example, "15").

-time
The hour of the day when you want to create an archive.
-initialpause
Optional. Specify this option if you want to initially pause archiving after you configure the archiving schedule.

Examples:

Archive all recovery points with creation dates starting from 04/30/2012 02:55 PM for all machines on the Core, and replace pre-existing archived data pertaining to this Core:

>New-ScheduledArchive -core 10.10.10.10 -user administrator -password 23WE@#$sdd -path "d:\work\archive" -s
    tartdate "04/30/2012 02:55 PM" -all -recycleaction replacethiscore

Archive recovery points that fall within a date range for two protected machines, and clear all archived data from the directory before writing the new archive:

>New-ScheduledArchive -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver "10.20.30.40" "20.20.10.1" -path "d:\work\archive" -startdate "04/30/2012 02:55 PM" -enddate "05/31/2012 11:00 AM" -recycleaction erasecompletely

Create an incremental archive for all recovery points with creation dates starting from 04/30/2012 02:55 PM for all machines on the Core to the cloud account with the name "Amazon S3" and a container named "Container":

>New-ScheduledArchive -core 10.10.10.10 -user administrator -password 23WE@#$sdd -path "ArchiveOnCloud" -cloudaccountname "Amazon S3" -cloudcontainer "Container" -startdate "04/30/2012 02:55 PM" -all -recycleaction incremental

New-Snapshot

The New-Snapshot command forces a snapshot resulting in a data transfer for the current protected machine. When you force a snapshot, the transfer will start immediately or will be added to the queue. Only the data that has changed from a previous recovery point will be transferred. If there is no previous recovery point, all data on the protected volumes will be transferred.

Usage

The usage for the command is as follows:

New-Snapshot [-all] | -protectedserver [machine name]] -core [host name] -user [user name] -password [password]

Command Options

The following table describes the options available for the New-Snapshot command:

Table 133: New-Snapshot command options
Option Description
-?
Display this help message.
-all
Force all protected machines.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used.
-protectedserver
Force for the current protected machine’s name.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.

Example:

Force a snapshot for all protected machines:

>New-Snapshot -all

New-VBVirtualStandby

The New-VBVirtualStandby command lets you use PowerShell to create a new virtual export to a VirtualBox virtual machine (VM).

Usage

The usage for the command is as follows:

New-VBVirtualStandby -core [host name] -user [login] -password [password] -protectedserver [name | IP address] -volumes [volumes names] -vmname [virtual machine name] [-ram [total megabytes] | -usesourceram]  -linuxhostname [linux hostname] -hostport [linux port] -targetpath [location] -pathusername [login] -pathpassword [password] -initialexport

Command Options

The following table describes the options available for the New-VBVirtualStandby command:

Table 134: New-VBVirtualStandby command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-protectedserver
Show jobs for a specific protected machine, indicated by IP address.
-volumes
Optional. List the volume names you want to export. If not specified, all volumes in the recovery point(s) are exported. Values must be enclosed in double quotes and separated by space; for example, "c:", "d:".
Note: Do not use trailing slashes in volume names.
-vmname
The Microsoft Windows name of the virtual machine.
-ram
Allocate a specific amount of RAM on the virtual server.
-usesourceram
Optional. Allocate the same amount of RAM on the virtual server that the source protected machine has.
-linuxhostname
The Linux VirtualBox server host name.
-hostport
The Linux VirtualBox server port.
-targetpath
The local, network, or Linux path to the folder where you want to store the virtual machine files.
-pathusername
The user name for logging in to the network machine. It is only required when you specify a network location for the target path.
-pathpassword
The password for logging in to the network machine. It is only required when you specify a network location for the target path.
-accountusername
Optional. You can specify a user account with which to register the exported virtual machine. It is the user name for logging in to the user account. Use this option for a local or network machine only.
-accountpassword
Optional. You can specify a user account with which to register the exported virtual machine. It is the password for logging in to the user account. Use this option for a local or network machine only.
-initialexport
Optional. Specify this option if you need to start an initial on-demand virtual machine export after configuring the virtual standby.

Example:

Create a VirtualBox virtual standby machine named ExportedMachine1 in a specified location:

Pending example from QA.

>New-VBVirtualStandby -protectedserver 10.10.10.4 -volumes C:\ -vmname ExportedMachine1 -usesourceram -targetpath I:\VMExport
Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación