After enabling SMTP email or SNMP trap notification methods, you can specify additional notification events by configuring parameters in Quest Service Agent (QSA). You can specify which events will trigger a notification and which notification method to use for each event.
In addition, you can configure QSA to send a notification when a LiveReorg finishes that includes the reorganization results. This option is available for the SMTP email method only.
To configure notification details (SMTP email or SNMP trap)
Select Tools | Admin | Quest Server Agent | Manage Quest Server Agent Installation.
In the QSA Parameters page of the QSA Installer, for each event you want to monitor, enter one of the following four values based on the notification method you want to use (and have enabled):
|"NONE"||Notification is disabled.|
|"EMAIL"||Send SMTP email notification.|
|"SNMP"||Send SNMP trap notification.|
|"BOTH"||Send both SMTP email and SNMP trap notification.|
Enter one of the values listed above into the value field for each parameter that corresponds to an event you want to monitor. Select from the following parameters:
Note: To view all parameters, clear the Show only required fields with missing value checkbox.
|SEND_GROUP_STATUS||Send notification of a static change to the group status.|
|SEND_SCRIPT_START||Send notification when script starts (101).|
|SEND_SCRIPT_RESTART||Send notification when script is restarted (104).|
|SEND_SCRIPT_UNSCHEDULED||Send notification when script is unscheduled (110).|
|SEND_SCRIPT_COMPLETE||Send notification when script completes (210).|
|SEND_SCRIPT_CANCELLED||Send notification when script is cancelled (310).|
|SEND_SCRIPT_ABORT||Send notification when script aborts (320).|
|SEND_SCRIPT_HALTED||Send notification when script is halted (370).|
|SEND_SCRIPT_SCHEDULED||Send notification when a script is scheduled (410).|
|SEND_LR_WAIT_WINDOW||Send notification when a LiveReorg is waiting for window (620).|
|SEND_LR_IN_WINDOW||Send notification when a LiveReorg is in the window (621).|
|SEND_LR_WAIT_APPROVAL||Send notification when a LiveReorg is waiting for approval (630).|
|SEND_LR_APPROVED||Send notification when a LiveReorg is approved (631).|
|SEND_LR_START||Send notification when a LiveReorg starts (710).|
|SEND_LR_RESTART||Send notification when a LiveReorg restarts (715).|
|SEND_LR_COPY_START||Send notification when a LiveReorg table copy starts (720).|
|SEND_LR_COPY_COMPLETE||Send notification when a LiveReorg table copy completes (730).|
|SEND_LR_SWITCH_START||Send notification when a LiveReorg starts to switch (740).|
|SEND_LR_SWITCH_COMPLETE||Send notification when a LiveReorg switch completes (750).|
Send notification when a LiveReorg completes (760).
Setting this parameter sends an email without a results report. To include a results report, use one of the SEND_LR_COMPLETE parameters listed below.
Tip: The parameter prefix indicates the level of the event. SEND_SCRIPT prefixes script-level events, which occur no more than once per script execution. SEND_LR prefixes live-reorganization-level events, which occur one or more times depending on the number of live reorganization objects in the script.
To configure SEND_LR_COMPLETE parameters (SMTP email only)
To specify the type of results report you want to include in a notification that is sent after a LiveReorg finishes, select from the following parameters:
|Parameter||Results Report Type||Description|
|SEND_LR_COMPLETE||No report||No report|
|SEND_LR_COMPLETE_DATA||Detail objects, summary by object type and total savings reports.||This report is the most detailed and includes the object details, detailed storage data, and a storage data summary by object.|
|SEND_LR_COMPLETE_SUM||Summary by object type and total savings reports.||This report delivers a summary of the storage data by object.|
|SEND_LR_COMPLETE_TOTAL||Total savings report.||This report lists the storage data totals only.|
Live Reorg Shell (LRSH) is a command line tool you can use to monitor Live Reorg scripts. Many of the tasks you can perform using the Scripts/Job Monitor you can perform using Live Reorg Shell.
This tool can be useful for server Administrators and others who do not have access to the Space Manager desktop application, but would like to monitor or run Live Reorg scripts.
When to use Live Reorg Shell
Use Live Reorg Shell when you do not have access to the Space Manager desktop application, but you need to stop a script, run a script, approve a switch, or just monitor a job.
How to access Live Reorg Shell
Live Reorg Shell is installed on the server along with QSA. You can access Live Reorg Shell directly from the server or remotely. To access Live Reorg Shell remotely, use Telnet or any similar secure-shell remote-access utility.
What you can do using Live Reorg Shell
Live Reorg Shell allows you to perform many of the same tasks you normally perform using the Scripts/Job Monitor. You can do the following using Live Reorg Shell:
Important: You cannot use LiveReorg Shell to clean up jobs. If you cancel a job using LiveReorg Shell, you must then use the Space Manager application to perform clean-up tasks, if required.
To start Live Reorg Shell
To get help (list commands)
At the lrsh prompt, type help. Live Reorg Shell lists all relevant commands and their descriptions.
Note: Live Reorg Shell help is context-sensitive. LRSH lists only the commands that are relevant to the level at which the prompt is currently located.
To monitor jobs and scripts
After starting LRSH, at the lrsh prompt, type list to list the current jobs for this database. A list of jobs (script groups) displays, including start, schedule, and finish dates, and job status.
Note: If the list is incomplete, type ENTER to display additional jobs (script groups).
To select a job, type the job number after the list displays. The job's status information displays.
Note: To refresh the job status information, press ENTER.
To take action on the job, type a command to start, cancel, restart, un-schedule, or approve the job (script group).
Note: Type h here to list relevant commands.
Use the following commands to start Live Reorg Shell or to display run options.
|lrsh||Starts Live Reorg Shell|
|lrsh.sh -?||Displays Live Reorg Shell information and a list of run options.|
The following table lists some of the most-frequently used commands in Live Reorg Shell.
Use to exit out of Live Reorg Shell.
Type q at any prompt in LRSH to go back up one level from a job, script, or action.
Lists all relevant commands and their descriptions.
Note: Lists only the commands relevant to the level at which the prompt is located.
At the database level, lists the jobs for that database.
At the job level, lists the scripts in that job.
|<job/script number>||After a list displays, type the job or script number to select that job or script. Then you can perform an action or view details of that job/script.|
|Press the ENTER key||
Press ENTER after an incomplete list displays to view more list items.
Press ENTER after a job is selected to refresh the status.
Press ENTER after a script is selected to view log files.
Run the selected job (script group).
Note: After running or restarting, press ENTER to refresh job status.
Restart an interrupted job (script group).
Note: After running or restarting, press ENTER to refresh job status.
|c||Cancel (pause) the selected job (script group).|
|a||Approve the selected job (script group).|
|u||Un-schedule the selected job (script group).|
Note: Live Reorg Shell commands are case-sensitive.
Tip: To exit Telnet, type exit.
As you monitor and manage scheduled scripts from the Scripts/Job Monitor window, you can also monitor and manage the Quest Server Agent (QSA). This allows you to easily check the status of QSA, which is used to run stored scripts. Most management functions can only be used when QSA is running.
You can check the status of QSA from the QSA Status panel at the top of the Scripts/Job Monitor window. You can also check its status in the QSA field in the top-right corner of the Script Properties dialog.
QSA can be in one of four states:
QSA starts automatically during installation on UNIX servers and local Windows servers (those that reside on your Space Manager client computer). To start QSA on a remote Windows server, use the Windows Services window on the server.
In most cases, QSA starts automatically when it is installed. It then runs continuously, waiting to execute scripts at their scheduled times. Normally, QSA only needs to be restarted if it was stopped using the Stop Quest Server Agent function.
The Start Quest Server Agent function can be used to start QSA on local Windows servers (those that reside on your Space Manager client computer) and on UNIX and Linux servers to which you have both SSH and SFTP access. See Start QSA Under Special Circumstances for more information about starting QSA with other configurations.
Note: If QSA is not running when a script’s scheduled execution time occurs, you have 10 minutes in which to start it. The script is executed when QSA starts. If QSA starts after the 10-minute time window ends, the script aborts with this error: “QSA-20312: Scheduled launch time expired”. To run a script whose launch time has expired, execute it on demand or reschedule it from the Scripts/Job Monitor.
To start QSA from the Scripts/Job Monitor
Use the Restart Quest Server Agent function when you do not have the permission level necessary to start the Quest Server Agent. The Restart Quest Server Agent function automatically stops and restarts the agent. This only requires the same permission level as that for stopping the agent.
To restart QSA from the Scripts/Job Monitor
The Stop Quest Server Agent function can be used to stop QSA on local Windows servers (those that reside on your Space Manager client computer) and on UNIX and Linux servers to which you have both SSH and SFTP access. See Stop QSA Under Special Circumstances for more information about stopping QSA with other configurations.
To stop QSA from the Scripts/Job Monitor
Tip: You can also start, restart, and stop QSA using the Tools | Admin | Quest Server Agent menu. See Start or Stop QSA Server Agent for more information.
Note: Analysis Groups is a discontinued feature in Space Manager. This topic is provided for users who may continue to run existing statistics-collection scripts that were created in a previous version of Space Manager.
As you monitor statistics collection scripts, be aware that three scripts can be run for one analysis group:
The statistics collection script runs first. Immediately after this script completes, its status is “Completed”. After the rescheduler script runs, the collection script’s status is changed to “Scheduled”. If a collection script is scheduled to run only once, it is cleared from the monitor when it completes.
If QSA parallel processing is selected for an analysis group, the worker script runs next. When it completes, its status is displayed as “Completed” and it is cleared from the Scripts/Job Monitor (it remains in the monitor if statistics collection is aborted).
The rescheduler script runs last. After it completes, its status is “Completed”.
© 2021 Quest Software Inc. ALL RIGHTS RESERVED. Feedback Nutzungsbedingungen Datenschutz