Chat now with support
Chat mit Support

Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

Resume

The administrator can use this command to resume snapshots, export to a virtual machine, and replicate. You must specify your need to resume by a parameter. The following parameters are valid: snapshot, vmexport, and replication. See Pause for more details.

Usage

The usage for the command is as follows:

/resume [snapshot | vmexport | replication] -core [host name] -user [user name] -password [password] -all | -protectedserver [name | IP address] -incoming [host name] | outgoing [host name] -time [time string]

Command Options

The following table describes the options available for the resume command:

Table 65: Resume command options
Option Description
-?
Display this help message.
-restore
[snapshots], [replication] or [vmexport].
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-all
Resume all agents on the selected Core.
-protectedserver
Resume current protected server.
-incoming
Host name of the remote core that replicates to the core machine.
-outgoing
Host name of the remote target core to which data is replicated.

Examples:

Resume snapshots for specific protected server:

>cmdutil /resume snapshot -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.10.4

Resume export to a virtual machine for all protected machines on the core:

>cmdutil /resume vmexport –core 10.10.10.10 -user administrator -password 23WE@#$sdd -all

Resume outgoing replication on the core for a specific protected machine:

>cmdutil /resume replication -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.1.76

Resume outgoing replication for all protected machines on the target core:

>cmdutil /resume replication -core 10.10.10.10 -user administrator -password 23WE@#$sdd -outgoing 10.10.1.63

Resume incoming replication for all machines on the target core:

>cmdutil /resume replication -core 10.10.10.10 -user administrator -password 23WE@#$sdd -incoming 10.10.1.82

ResumeScheduler

This command lets you resume the task scheduler it has been paused.

Usage

The usage for the command is as follows:

/resumescheduler -core [host name] -user [user name] -password [password]

Command Options

The following table describes the options available for the resumescheduler command:

Table 66: ResumeScheduler command options
Option Description
-?
Display this help message.
-restore
[snapshots], [replication] or [vmexport].
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.

Example:

Resume snapshots for specific protected server:

>cmdutil /resumescheduler -core 10.10.127.42 -user admin -password 676df#df

SeedDrive

You can use a seed drive for the initial data transfer when you establish Rapid Recovery replication.

Usage

The usage for the command is as follows:

/seeddrive [-list | -startcopy | -startconsume | -abandon] -path [local | network path] -seeddriveusername [user name] -seeddrivepassword [password] -remotecore [name] [-targetcore [name or IP] | -protectedserver [name] | -all] -usecompatibleformat

Command Options

The following table describes the options available for the seeddrive command:

Table 67: SeedDrive command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-list
The list of outstanding seed drives with extended information.
-startcopy
Start copying data to the seed drive.
-startconsume
Start consuming the seed drive.
-abandon
Abandon the outstanding seed drive request.
-path
The local or network path of the seed drive.
-seeddriveusername
Optional. The user name for the network location of the seed drive.
-seeddrivepassword
Optional. The password for the network location of the seed drive.
-targetcore
Optional. Use only with the -copy option. It is the name or IP address of the remote Core. All protected machines replicating to this Core receive seed drive recovery points.
-remotecore
Use only with the -consume option. It is the name of the remote Core from which the seed drive recovery points are created or consumed.
-protectedserver
The name or IP address of the protected machine you are using to create or consume the seed drive of recovery points. For example: -protectedserver "10.10.60.48" "10.10.12.101."
-all
This option specifies whether to consume or copy all of the available protected machines.
-usecompatibleformat
The new archiving format offers improved performance, however it is not compatible with older Cores. Use this option when working with a legacy AppAssure Core.
Confirm with dev.

Examples:

List outstanding seed drives:

>cmdutil /seeddrive -list

Copy two protected machines to the seed drive on the network share:

>cmdutil /seeddrive -startcopy -remotecore TargetCoreName -path \\10.10.1.1\Share\Seed\ -seeddriveusername Administrator -seeddrivepassword 12345 -usecompatibleformat

Starting consuming the seed drive:

>cmdutil /seeddrive -startconsume -path \\10.10.1.1\Share\Seed\ -seeddriveusername Adminsitrator -seeddrivepassword 12345 -remotecore RemoteCoreName

Abandon an outstanding seed drive request:

>cmdutil /seeddrive -abandon RemoteCoreHostName

SetAgentMetadataCredentials

The setagentmetadatacredentials command sets the metadata credentials for a specified protected machine.

Usage

The usage for the command is as follows:

/setagentmetadatacredentials -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -target [default | SQL | Exchange] -metadatausername [user name] -metadatapassword [password] -sqlinstancename [SQL instance name] -usewindowsauthentication

Command Options

The following table describes the options available for the setagentmetadatacredentials command:

Table 68: SetAgentMetadataCredentials command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver
The name or IP address of the protected machine.
-target
Optional. The type of metadata, such as SQL, Exchange, or default.
-metadatausername
Optional. The metadata-related login.
-metadatapassword
Optional. The metadata-related password.
-sqlinstancename
Optional. The specific SQL instance name. Use this option in conjunction with the -target "sql."
-usewindowsauthentication
Optional. Use this option if your SQL credentials are also used for Windows authentication.

Example:

Set credentials for Exchange metadata:

>cmdutil /setagentmetadatacredentials -core 10.10.10.10 -user administrator -password -23WE@#$sdd -protectedserver 10.10.20.20 -target exchange -metadatausername administrator -metadatapassword 123#
Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen