Chat now with support
Chat mit Support

Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

ManagementCertificates

Use the managementcertificates command to view a list of the Microsoft Azure management certificates.

Usage

The usage for the command is as follows:

/managementcertificates -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -list [list certificates] -upload [publish setting file path] -delete [subscription IID]
	 

Command Options

The following table describes the options available for the managementcertificates command:

Table 41: ManagementCertificates command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver
The name or IP address of a protected machine.
-list
Optional. List of Azure management certificates.
-upload
Optional. The location of the publish settings file from which you want to upload Azure management certificates.
-delete
Use this option to delete an Azure management certificate by using the subscription ID.

Examples:

View a list of the Azure management certificates previously added on the Core:

>cmdutil /managementcertificates
>cmdutil /managementcertificates -list

Upload Azure management certificates from a publish settings file:

>cmdutil /managementcertificates -upload "c:\file.publishsettings"

Delete an Azure management certificate using the subscription ID:

>cmdutil /managementcertificates -delete "111111-22222-33333-4444-555555"

Mount

The mount command mounts a snapshot of one or more drives. You can specify whether the mount should be read, write, or read-only with previous writes. The default selection is read-only.

Usage

The usage for the command is as follows:

/mount -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -mounttype [read | write | readOnlyWithPreviousWrites] -drives [drive names] -volumes [volume names] -path [location] -rpn [number | numbers] | -time [time string]

Command Options

The following table describes the options available for the mount command:

Table 42: Mount command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver
Protected machine with a recovery point or points to be mounted.
-mounttype
Optional. Specifies a mount mode. Available values are 'read' (read-only), 'readOnlyWithPreviousWrites' (read-only with previous writes), 'write' (writable). The default mode is read-only.
-volumes	
Optional. List of volume names to mount. If not specified, all volumes are mounted. Values must be enclosed in double quotes and separated by spaces; for example: "c:" "d:". Do not use trailing slashes in volume names.
-path
Path to a folder on the core server to which the recovery point should be mounted. If one does not exist, a folder is automatically created.
-rpn
Optional. The sequential number of a recovery point to mount (use /list rps command to get the numbers). Specify several space-separated numbers to mount multiple recovery points with a single command. In this case data from each recovery point will be stored in a separate child folder. Note: if neither option -time nor -rpn is specified then the most recent recovery point that successfully passed integrity check will be mounted.
-time
Optional. Determines recovery point or points to be selected for mount. Available values include: 'latest', 'passed', exact time in the format "mm/dd/yyyy hh:mm tt" (for instance, "2/24/2012 09:00 AM"). Keep in mind to specify date time values of the time zone set on your PC. If neither the -time option nor the -rpn option is specified, then the most recent recovery point that successfully passed an integrity check is mounted.
-localdrive
Optional. Perform mount to user disk on local PC.

Examples:

Mount the most recent recovery points containing volumes “c:\” and “d:\” in the read-only mode:

>cmdutil /mount -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -path c:\mountedrecoverypoint -mounttype read -volumes "c:" "d:"

Mount recovery points with numbers 2 and 7:

>cmdutil /mount -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -path c:\mountedrecoverypoint -rpn 2 7

MountRepository

The command mounts a selected repository.

Usage

The usage for the command is as follows:

Mount-Repository -core [host name] -user [login] -password [password] -name [repository name]

Command Options

The following table describes the options available for the mount-repository command:

Table 43: Mount command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-name Name of a repository you want to mount.

Examples:

Mount repository "Repository 2":

> Mount-Repository -name "Repository 2"

MountArchiveRepository

To restore data from an archive in Rapid Recovery, you must first mount it.

Usage

The usage for the command is as follows:

/mountarchiverepository -core [host name] -user [user name] -password [password] -name [archive repository name]

Command Options

The following table describes the options available for the mountarchiverepository command:

Table 44: MountArchiveRepository command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-name
Required. The name of the archive repository.

Examples:

Mount the repository named "NewArchive:"

>cmdutil /mountarchiverepository -name NewArchive
Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen