Navigation: Configuring Copying Options > Transformation Options |
If both Advanced Mode and Custom Transformers are enabled, you can view, create, and edit Transformers.
Transformers are used primarily to transform fields and columns into Managed Metadata. There are also several built-in, non-editable transformers that Metalogix Content Matrix uses to process data during the migration. Advanced users can also create custom transformers using PowerShell.
The Transformations tab is divided into two sections:
·The Available Definitions section list all of the transformation definitions that are available for the current migration action, in alphabetical order. Only definitions that are valid for the level at which the migration was initiated are listed.
·The Applied Transformers For <Object> dialog displays all of the transformations for the selected definition.
Grayed out items are mandatory transformations that are run during the course of a normal migration, and these actions cannot be edited or removed. However, they can be reordered by using the up and down arrows to the right-hand side of the window. This allows you to create and apply a transformation action before a mandatory action, if you want your action to run earlier in the process. You can even add a second instance of a mandatory transformer to run at a different stage of the migration process.
Navigation: Configuring Copying Options > Transformation Options > Transforming a Site or List Column into a Managed Metadata Columns |
Metalogix Content Matrix can transform SharePoint site or list columns (fields) into Managed Metadata columns, as a part of a migration. This allows users to transform columns on the source into SharePoint Managed Metadata columns on the target.
Column to Managed Metadata transformation settings are not preserved, so they will have to be configured for each migration that is run.
NOTE: This option is only available when:
·The prerequisites for migrating Managed Metadata are met.
AND
·The Resolve managed metadata by name and hierarchy option is selected.
Navigation: Configuring Copying Options > Transformation Options > Transforming a Site or List Column into a Managed Metadata Columns > Additional Considerations for Site Column Transformations |
A site column can be transformed into a Managed Metadata column even if the site column's root site is not being migrated. In this case, Metalogix Content Matrix will add the Managed Metadata site column(s) to the top level site that is included in the migration, and all of the content in the scope of the migration will inherit these new site columns in place of the old ones. When applying a transformation of site columns in a migration, the site columns transformation will be applied to all of the content within the scope of the action that uses the specified site column. This includes any sites, lists, libraries and even content types that use the site column, and are within the scope of the migration.
For example, if a subsite is being migrated to the target, and this subsite contains lists and/or content types that use a site column which is inherited from the top level site, then when the sub site is migrated these inherited site columns will be replaced by new Managed Metadata site column. These new Managed Metadata site columns will use the subsite as their root site (since it was the top level site), and all of the content within the migration scope will inherit these new columns instead of using their original site columns. All the data for these columns will be converted to Managed Metadata values. Any site columns within content types (in the scope of the migration) will be converted the same way, and placed at the top level site in the migration.
NOTE: Metalogix Content Matrix can only apply this transformation to action to site columns of a certain type. The available column types include: Choice, MultiChoice, Text, Lookup, LookupMulti, Number, DateTime, Currency, Boolean, Note, and User.
Navigation: Configuring Copying Options > Transformation Options > Transforming a Site or List Column into a Managed Metadata Columns > Transforming List Columns into Managed Metadata Fields |
1.In the Managed Metadata Options tab, make sure you select the appropriate option(s):
§Transform specified site columns to managed metadata columns
AND/OR
§Transform specified columns in lists to managed metadata columns
2.Click the [ ] button to the right of the selected option to display the Configure List Column Transformations options window.
3.In the Explorer View section of the Configure List Column Transformations window, navigate to the top level site or list node to which the transformation(s) should be applied.
The top level node displayed in this window will be the target node that was selected for the migration. This allows users to either:
§Select the top level node and apply the transformation to content beneath it
OR
§Select a specific sub-site, list, or document library and apply the transformation to selected items.
NOTE: In the case of site column transformation, the site column will be applied to all instances of that site column from the top level node down.
4.Select the appropriate configuration option to apply: Use the information in the following table for guidance.
If you want to |
Then |
---|---|
transform a column from the selected site or list |
Select Configure Transformation for a Column. NOTE: The Configure Transformation for a [Object] Column dialog > Transform Columns tab pre-populates the Source List field with the URL for the selected site or list. |
select one or more sites or lists containing the column to transform based on filter conditions |
A.Select Configure Transformation using a Rule. B.Click the [ ] button and apply filter conditions For example, you can choose to transform columns for all lists that whose internal name contain the word Library. |
5.In the Transformation Columns tab - Source section, specify the Site Column or List Column to which you want to apply the transformation. Click the [ ] button and apply a filter to narrow the scope to which that the transformation will be applied. For example:
§If you set the List Filter Conditions to "DisplayName Contains Marketing" then only content that contains "Marketing" within the DisplayName column will be included in the transformation.
§If you set the Site/List Column Filter Conditions to if the value is set as "Name Contains Sales" then only columns that contain "Sales" within the Name value will be transformed into Managed Metadata columns.
6.Complete the Transform Columns tab Target section as follows:
a)Select the Term Store to use for the new Managed Metadata field on the target from the drop-down.
This drop down menu displays all of the available Term Stores for the target node.
b)Select a Term Group from within the selected Term Store from the drop-down.
NOTE: If you want to create a new Term Group and/or Term Set instead of using a pre-existing one, you can manually enter a text value in the Term Group and/or Term Set field, and Metalogix Content Matrix will create the new group/term within the Term Store, and apply it to the transformation.
7.If you want to set an anchor point below the selected Term Set for adding new taxonomy terms, enter the Term Anchor.
EXAMPLE: The selected Term Store contains a Term Group called People, within which is a Term Set called Department.
If you do not set a Term Anchor, Metalogix Content Matrix will add new terms directly below the Department Term Set.
If you were to set the Term Anchor to Engineering, new terms would be added as child terms of the Engineering Team.
To set a Term Anchor further down in the term hierarchy, use the > sign to drill down to the desired level.
You can even create a new term as a parent for transformed terms. For example, if you want to create a new term, Toronto, as a child term of existing term DEV, you would enter the Term Anchor as Engineering>DEV>Toronto. New terms would then be added below Toronto.
8.If you want the transformation to apply to a column other than the column that corresponds to the selected source column, check the Transform to New or Existing Column box.
The following table describes how Metalogix Content Matrix handles transformations when this box is checked.
If |
Then |
---|---|
both the Name and Display Name entered are identical to an existing column on the target |
the column on the source will be transformed into that column on the target. |
either the Name or the Display Name do not match an existing column on the target |
·a new column is created on the target with a new Name and Display Name, and ·the Managed Metadata transformation is applied to this new column. EXAMPLE: If there is a column on the source named "Author", and the values in this column are to be transformed into Managed Metadata values, then this option could be used to create a new column named "AuthorID". All the values from the "Author" column on the source would be copied into the "AuthorID" column on the target, and the Managed Metadata transformation is only applied to "AuthorID", leaving "Author" unchanged. |
9.If you checked the Transform to New or Existing Column box, enter the Internal Name and Display Name of the new column you want to create or the existing column you want to use.
NOTE: The Internal Name should not contain spaces. If you are transforming to an existing column, make sure you enter both the Internal Name and Display Name exactly as they appear on the target.
10.If you want to substitute source item values with new values that will be used as Managed Metadata terms:
b)Select the Substitute Source Item Values tab
Either:
§enter the Value you want to substitute exactly as it appears on the source
OR
§click the Filter icon () and apply one or more filter conditions.
11.Enter the Substitute value exactly as you want it to appear on the target.
12.Click [OK] to close the Configure Transformation dialog.
13.Click [OK] to close the Configure Transformation for a List Column dialog.
The new transformation now displays in the bottom (Configurations) section of the window.
NOTES:
·When a site column transformation is set, the Transform specified columns in list to Managed Metadata columns option in the Managed Metadata Options tab will now be selected as well. Because a site column is still a column in a list, the site column transformation will also be visible in the list column transformation dialog. However, you will be unable to edit the site column transformation from the Configure List Column Transformations dialog even though it is visible. The List Filter value in the "Configuration" section of this dialog will also be empty, which will help you differentiate between a list/field transformation and a site column transformation.
·If a site column transformation is being applied, and the specified site column exists within a content type, you must also check the Copy Content Types option in the Site Options tab of the configuration options. If this option is not set when applying a transformation to a site column in a content type, then not all of the columns will be available for edit in SharePoint's item edit dialog, after migration.
© ALL RIGHTS RESERVED. Feedback Nutzungsbedingungen Datenschutz Cookie Preference Center