立即与支持人员聊天
与支持团队交流

Rapid Recovery 6.3 - Command Line and Scripting Reference Guide

Rapid Recovery overview and system requirements Command Line Management Utility PowerShell Module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-CredentialsVaultAccount AddEncryptionKeytoProtectedMachine Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-ActiveBlockMapping Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-EsxServerProtectionRules Edit-ExcludedFilesAndFolders Edit-HyperVClusterProtectionRules Edit-HyperVServerProtectionRules Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-CredentialsVaultAccounts Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstanceMetadata Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-ProtectionRules Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes Join-CredentialsVaultAccount New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Open-DvmRepository Push-Replication Push-Rollup Remove-Agent Remove-CredentialsVaultAccount Remove-EncryptionKey Remove-EsxAutoProtectObjects Remove-EsxVirtualMachines Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Scheduler Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-CredentialsVaultAccount Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-BackupSettings Start-ChecksumCheck Start-ConfigureAgentMigration Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-RestoreSettings Start-RestoreUrc Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Update-Repository
Localization Qualifiers
Scripting

Remove-HyperVClusterSharedVirtualDisks

The Remove-HyperVClusterSharedVirtualDisks cmdlet lets you remove shared Hyper-V virtual disks from protection of a Core.

Usage

The usage for the command is as follows: 

Remove-HyperVClusterSharedVirtualDisks -core [host name] -user [user name] -password [password] -shareddisks [shared virtual disks name or path collection | all]
Command Options

The following table describes the options available for the Remove-HyperVClusterSharedVirtualDisks command:

Table 156: Remove-HyperVClusterSharedVirtualDisks command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-protectedserver
 Use this option to edit the shared virtual disks for a specific protected machine. 
-shareddisks
 A list of shared disks each separate by a comma.
Examples:

Remove one shared virtual disk from protection: 

>Remove-HyprVClusterSharedVirtualDisks -protectedserver "HV-2012R2" -shareddisks "Shared Disk 1"

Remove-HyperVClusterVirtualMachines

The Remove-HyperVClusterVirtualMachines cmdlet lets you remove specific VMs of a Hyper-V cluster from protection of a Core.

Usage

The usage for the command is as follows: 

Remove-HyperVClusterVirtualMachines -core [host name] -user [user name] -password [password] -repository [name] -protectedserver [name | IP address] -virtualmachines [virtual machines collection | all]
Command Options

The following table describes the options available for the Remove-HyperVClusterVirtualMachines command:

Table 157: Remove-HyperVClusterVirtualMachines command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-protectedserver
 Use this option to protect virtual machines. 
-virtualmachines
 A list of the virtual machines that you want to protect, each separated by a comma. The name of the VM must be enclosed in double quotes. 
-deleterecoverypoints
 Optional. Include this option if you want to delete all of the recovery points for this VM.
Examples:

Remove specific virtual machines of a Hyper-V cluster from protection by the Core and delete its recovery points: 

>Remove-HyperVClusterVirtualMachines -protectedserver hvcluster -virtualmachines "Win8x64-gen1", "Win2012x64-gen2" -deleterecoverypoints

Remove-HyperVVirtualMachines

The Remove-HyperVVirtualMachines cmdlet lets you remove specific Hyper-V VMs from the protection of a Core.

Usage

The usage for the command is as follows: 

Remove-HyperVVirtualMachines -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -virtualmachines [virtual machines collection | all] -deleterecoverypoints
Command Options

The following table describes the options available for the Remove-HyperVVirtualMachines command:

Table 158: Remove-HyperVVirtualMachines command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-protectedserver
 Use this option to edit Hyper-V objects for a specific virtual machine. 
-virtualmachines
 A list of the virtual machines that you want to protect, each separated by a comma. The name of the VM must be enclosed in double quotes. 
-deleterecoverypoints
 Optional. Include this option if you want to delete all of the recovery points for this VM.
Examples:

Remove specific Hyper-V VMs from protection and delete its recovery points: 

>Remove-HyperVVirtualMachines -protectedserver HVServer1 -virtualmachines "Win8x64-gen1", "Win2012x64-gen2" -deleterecoverypoints

Remove-Mount

The Remove-Mount command dismounts a mounted recovery point specified by the /Path. Dismount points for the selected machine using the -protectedserver parameter or dismount points for all the mounted recovery points by using the -all parameter.

Usage

The usage for the command is as follows: 

Remove-Mount -core [host name] -user [user name] -password [password] [-protectedserver [machine name] | -path [mount path]]
Command Options

The following table describes the options available for the Remove-Mount command:

Table 159: Remove-Mount command options
Option Description 
-?
 Display this help message. 
-all
 Dismount all mounted recovery points. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-path
 Dismount selected mount point. 
-protectedserver
 Dismount all mounted recovery points for the current protected machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.
Examples:

Dismount the recovery point specified by the path: 

>Remove-Mount -core 10.10.10.10:8006 -user administrator -password 23WE@#$sdd -path C:\mountedRecoveryPoint
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级