立即与支持人员聊天
与支持团队交流

Rapid Recovery 6.3 - Command Line and Scripting Reference Guide

Rapid Recovery overview and system requirements Command Line Management Utility PowerShell Module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-CredentialsVaultAccount AddEncryptionKeytoProtectedMachine Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-ActiveBlockMapping Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-EsxServerProtectionRules Edit-ExcludedFilesAndFolders Edit-HyperVClusterProtectionRules Edit-HyperVServerProtectionRules Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-CredentialsVaultAccounts Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstanceMetadata Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-ProtectionRules Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes Join-CredentialsVaultAccount New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Open-DvmRepository Push-Replication Push-Rollup Remove-Agent Remove-CredentialsVaultAccount Remove-EncryptionKey Remove-EsxAutoProtectObjects Remove-EsxVirtualMachines Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Scheduler Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-CredentialsVaultAccount Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-BackupSettings Start-ChecksumCheck Start-ConfigureAgentMigration Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-RestoreSettings Start-RestoreUrc Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Update-Repository
Localization Qualifiers
Scripting

ListAzureVMSizes

Use the listazurevmsizes command to determine the size of a virtual machine (VM) that has been deployed to a Microsoft Azure cloud account.

Usage

The usage for the command is as follows: 

/listazurevmsizes -storageaccountname [Azure storage account name] -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] or [IP]
Command Options

The following table describes the options available for the listazurevmsizes command:

Table 41: ListAzureVMSizes command options
Option Description 
-?
 Display this help message. 
-cloudaccountname
 Optional when specifying -storageaccountname. Specify the name of the Azure cloud account. 
-storageaccountname
 Optional when specifying -cloudaccountname. Specify the name of the Azure storage account. 
-subscriptionid
 The Azure subscription ID. 
-cloudservicename
 The name of the Azure cloud service. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
Examples:

View a list of the available virtual machine sizes for the cloud account Account1: 

>cmdutil /listazurevmsizes -cloudaccountname Account1 -cloudservicename Service

View a list of the available virtual machine sizes for the storage account named "teststorage:" 

>cmdutil /listazurevmsizes -storageaccountname teststorage -cloudservicename Service

ListOracleInstances

The listoracleinstances command lets you retrieve a list of all Oracle instances running on a specified protected machine.

Usage

The usage for the command is as follows: 

/listoracleinstances -core [host name] -user [user name] -password [password] -protectedserver [name | IP address]
Command Options

The following table describes the options available for the listoraclesinstances command:

Table 42: ListOracleInstances command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-protectedserver
 The name or IP address of the protected machine.
Example:

List the Oracle instances running on the specified protected server: 

>cmdutil /listoracleinstances -core 10.10.127.42 -user admin -password -676df#df -protectedserver 10.10.34.88

Mount

The mount command mounts a snapshot of one or more drives. You can specify whether the mount should be read, write, or read-only with previous writes. The default selection is read-only.

Usage

The usage for the command is as follows: 

/mount -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -mounttype [read | write | readOnlyWithPreviousWrites] -drives [drive names] -volumes [volume names] -path [location] -rpn [number | numbers] | -time [time string]
Command Options

The following table describes the options available for the mount command:

Table 43: Mount command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-protectedserver
 Protected machine with a recovery point or points to be mounted. 
-mounttype
 Optional. Specifies a mount mode. Available values are 'read' (read-only), 'readOnlyWithPreviousWrites' (read-only with previous writes), 'write' (writable). The default mode is read-only. 
-volumes

Optional. List of volume names to mount. If not specified, all volumes are mounted. Values must be enclosed in double quotes and separated by spaces.

NOTE: Do not use trailing slashes in volume names; for example, use "c:" "d:" instead of "c:/" "d:/".

-path
 Path to a folder on the core server to which the recovery point should be mounted. If one does not exist, a folder is automatically created. 
-rpn
 Optional. The sequential number of a recovery point to mount (use /list rps command to get the numbers). Specify several space-separated numbers to mount multiple recovery points with a single command. In this case data from each recovery point will be stored in a separate child folder. Note: if neither option -time nor -rpn is specified then the most recent recovery point that successfully passed integrity check will be mounted. 
-time
 Optional. Determines recovery point or points to be selected for mount. Available values include: 'latest', 'passed', exact time in the format "mm/dd/yyyy hh:mm tt" (for instance, "2/24/2012 09:00 AM"). Keep in mind to specify date time values of the time zone set on your PC. If neither the -time option nor the -rpn option is specified, then the most recent recovery point that successfully passed an integrity check is mounted. 
-localdrive
 Optional. Perform mount to user disk on local PC.
Examples:

Mount the most recent recovery points containing volumes “c:\” and “d:\” in the read-only mode: 

>cmdutil /mount -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -path c:\mountedrecoverypoint -mounttype read -volumes "c:" "d:"

Mount recovery points with numbers 2 and 7: 

>cmdutil /mount -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -path c:\mountedrecoverypoint -rpn 2 7

MountArchiveRepository

To restore data from an archive in Rapid Recovery, you must first mount it.

Usage

The usage for the command is as follows: 

/mountarchiverepository -core [host name] -user [user name] -password [password] -name [archive repository name]
Command Options

The following table describes the options available for the mountarchiverepository command:

Table 44: MountArchiveRepository command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-name
 Required. The name of the archive repository.
Examples:

Mount the repository named "NewArchive:" 

>cmdutil /mountarchiverepository -name NewArchive
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级