There may be times when you need to change the Rapid Recovery license applied to a machine, such as when moving from a trial license to a subscription or perpetual license. In such instances, you can change the license in the Command Prompt by using the applylicense
command.
The usage for the command is as follows:
/applylicense -core [host name] -user [user name] -password [password] -licensekey [license key] -licensepath [license file path] -licensenumber [license number] -email [email address]
The following table describes the options available for the applylicense
command:
Option | Description |
---|---|
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-licensekey |
Optional. A 30-character key comprising six groups of five alphanumeric characters, each separate by a hyphen. Use this key when a license file is not available. |
-licensepath |
Optional. The path to the file that ends with the .lic extension. If a license file is available, you can use this option instead of the -licensekey . |
-licensenumber |
Optional. You may have received this nine-digit license number in an order confirmation email. If you provide this number, use the email address that received it for verification. |
Optional. If you use the -licensenumber , you must include the email address that received it for verification. |
Change the license key associated with this Core to JL09F-89FSD-6THFS-DSE34-KS3D5-65DF2:
>cmdutil /applylicense -core 10.10.10.10 -user admin -password 676df#df -licensekey JL09F-89FSD-6THFS-DSE34-KS3D5-65DF2
Change the license key associated with this Core to the key contained in the license file:
>cmdutil /applylicense -core 10.10.10.10 -user admin -password 676df#df -licensepath C:\MyLicenseFile.lic
Change the license number associated with this Core to 111-111-111 using john.doe@example.com to verify the license:
>cmdutil /applylicense -core 10.10.10.10 -user admin -password 676df#df -licensenumber 111-111-111 -email john.doe@example.com
Businesses often use long-term storage to archive both compliant and non-compliant data. The archive feature in Rapid Recovery supports extended retention for compliant and non-compliant data. The administrator can save an archive on the local storage or network location by specifying the -path
parameter and credentials.
The usage for the command is as follows:
/archive -core [host name] -user [user name] -password [password] -all | -protectedserver [name | IP address | "[name1 | IP address1]" "[name2 | IP address2]"] -path [location] -startdate [time string] -enddate [time string] -archiveusername [name] -archivepassword [password] -comment [text] -cloudaccountname [name] -cloudcontainer [name] -recycleaction [type] -scheduletype [type] -dayofweek [name] -dayofmonth [number] -time [time] -usecompatibleformat -scheduled -edit -id [id] -initialpause -useglacierfordatfiles
The following table describes the options available for the archive
command:
Option | Description |
---|---|
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-all |
Archive all recovery points for all protected machines on the Core. |
-protectedserver |
Protected machine with recovery points to be archived. You can specify several machine names enclosed in double quotes and separated by spaces. |
-path |
Path where archived data should be placed; for example: d:\work\archive or network path \\servername\sharename. |
-startdate |
Start date for selecting recovery points by creation date. The value must be enclosed in double quotes; for example, "04/30/2012 02:55 PM" . |
-enddate |
Optional. End date for selecting recovery points by creation date. Value must be enclosed in double quotes; for example, "05/31/2012 11:00 AM" . The current time system is used by default. |
-archiveusername |
Optional. User name for the remote machine. Required for network path only. |
-archivepassword |
Optional. Password to the remote machine. Required for network path only. |
-comment |
Optional. Comment text must be enclosed in double quotes; for example: -comment “comment goes here...” . |
-usecompatibleformat |
Not supported for scheduled archives. The new format has improved performance, but it is not compatible with Cores older than release 6.2. Use this flag to create an archive that can be used with the old format. |
-cloudaccountname |
Optional. The name of the cloud account to which you want to save the archive. |
-cloudcontainer |
Optional. The name of the cloud container in the specified cloud account to which you want to save the archive. |
-recycleaction |
Specifies one of the following recycle action types:
|
-scheduled |
Optional. Specify this option to configure a scheduled archive job. |
-edit |
Optional. Use only for scheduled archives. Specify this option to edit an existing scheduled archive configuration. |
-id |
The identifier (ID) of the scheduled archive that you want to edit. |
-scheduletype |
The type of interval that you want to use for the scheduled archive. It should specify according to one of the following four values:
|
-dayofweek |
Only applies to the "weekly" option of the -scheduletype parameter. Specify the day on which you want to automatically create an archive (for example, "Monday" ). |
-dayofmonth |
Only applies to the "monthly" option of the -scheduletype parameter. Specify the date of the month on which you want to automatically create an archive using a number (for example "1" for the first day of the month). |
-time |
The hour of the day at which you want to automatically create an archive. |
-initialpause |
Optional. Specify whether you want to initially pause the archive job when you create it. |
-useglacierfordatafiles |
Optional. Only when archiving to an Amazon cloud. Specify this option if you want to use Amazon Glacier for archiving data files. |
Archive all recovery points with creation dates starting from 04/30/2012 02:55 PM for all machines on the Core:
>cmdutil /archive -core 10.10.10.10 -user administrator -password 23WE@#$sdd -path d:\work\archive -startdate “04/30/2012 02:55 PM” -all
Archive recovery points that fall within a date range for two protected machines:
>cmdutil /archive -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver "10.20.30.40" "20.20.10.1" -path d:\work\archive -startdate "04/30/2012 02:55 PM" -enddate "05/31/2012 11:00 AM"
Archive all recovery points with creation dates starting from 04/30/2012 02:55 PM for all machines on the Core to a cloud storage account with the name "Amazon S3" and container named "Container":
>cmdutil /archive -scheduled -core 10.10.10.10 -user administrator -password 23WE@#$sdd -path "ArchiveOnCloud" -cloudaccountname "Amazon S3" -cloudcontainer "Container" -startdate “04/30/2012 02:55 PM” -all -recycleaction incremental
Create a scheduled archive fo the last day of every month for machine 10.20.30.40 and replace pre-existing archived data pertaining to this Core:
>cmdutil /archive -scheduled -core 10.10.10.10 -user administrator -password 23WE@#$sdd -path "d:\work\archive" -recycleaction replacethiscore -scheduletype lastdayofmonth -time "10:00 PM"
Edit the path of an existing scheduled archive configuration:
>cmdutil /archive -scheduled -edit -id F595F697-2126-4F77-AE93-27AE2A022AF1 -protectedserver 10.20.30.40 -path "d:\work\Newarchive"
Edit the path and schedule type of an existing scheduled archive configuration:
>cmdutil /archive -scheduled -edit -id F595F697-2126-4F77-AE93-27AE2A022AF1 -protectedserver 10.20.30.40 -path "d:\work\Newarchive" -scheduletype daily -time "10:00 PM"
The backupsettings
command lets you back up the settings of the local Core to a specified location.
|
NOTE: After the Core settings have been backed up using this command or from the Core Console, you can restore them. For example, you can run the RestoreSettings command. |
The usage for the command is as follows:
/backupsettings -localpath
The following table describes the options available for the BackupSettings
command:
Option | Description |
---|---|
-? |
Display this help message. |
-localpath |
The path for the configuration backup. |
Back up your settings of the Core:
>cmdutil /backupsettings -localpath D:\work\archive
Use the cancelactivejobs
command to cancel the execution of all in-progress jobs of a specific type, such as transfer or replication.
The usage for the command is as follows:
/cancelactivejobs [-protectedserver [name : IP address] : -a[ll]] -core [host name] -user [user name] -password [password] -jobtype [job type filter]
The following table describes the options available for the cancelactivejobs
command:
Option | Description |
---|---|
-? |
Display help on the command. |
-core |
Optional. Remote core host machine IP address (with an optional port number). By default, the connection is made to the core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote core host machine. If you specify a password, you must also provide a user name. If none is provided, the logged-in user’s credentials are used. |
-protectedserver |
Determines the protected machine on which the jobs should be canceled. |
-all |
Select and cancel events of specified type for all protected servers. |
-jobtype |
Optional. Specifies job type filter. Available values are:
By default, all jobs of the specified type are canceled. |
Cancel all transfer jobs on Core 10.10.10.10:
>cmdutil /cancelactivejobs -core 10.10.10.10:8006 -user administrator -password 23WE@#$sdd -jobtype transfer
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Feedback 使用条款 隐私 Cookie Preference Center