Chat now with support
Chat with Support

DR Series DR2000v - 部署指南

Deploying the DR2000v on a Remote Hyper-V Host

Deploying the DR2000v on a Remote Hyper-V Host

NOTE: Ensure all the pre-requisites are complete before deploying the Dell DR2000v on a remote Hyper-V host. For more information, see topic “Prerequisites for deploying Dell DR2000v on a remote Hyper-V host.”
 
NOTE: For remote deployments you must access the DR2000v deployment files using Universal Naming Convention (UNC) path names and not mapped drive shares. The C: drive is the default share, so you should place the DR2000v deployment files on the local machine.
1.
From the local machine, access the DR2000v deployment package using a UNC path name.
2.
Run the Dell DR2000v command script from the install package using the UNC path name.
A command line deployment wizard is displayed with the following options:
a.
LOCAL
b.
REMOTE
c.
CONTROL PANEL
3.
Type option ‘b’ for remote deployment and press <Enter>.
You will be prompted to enter the remote hostname and user credentials for accessing it.
4.
Type the remote hostname or fully qualified domain name (FQDN) of the remote host and press <Enter>.
5.
Type the domain\user name for an authorized user of the remote host and press <Enter>.
6.
Type the password for this user and press <Enter>.
The following Remote Deployment menu of actions is displayed:
◦
Deploy
◦
Start
◦
Stop
◦
Delete
◦
Repair
7.
Type action ‘1’ to deploy and press <Enter>.
8.
Type the appropriate DR2000v Hyper-V name and press <Enter>.
The following options to select storage size are displayed:
a.
1TB Data Storage Size
b.
2TB Data Storage Size
c.
4TB Data Storage Size
9.
Type option ‘a’, ‘b’, or ‘c’ as appropriate and press <Enter>.
The DR2000v Hyper virtual machine code is now deployed and this process will take approximately 2–3 minutes. A message is displayed showing the deployment progress, that is creating of new DR2000v template, processing the DR2000v image, and populating the virtual machine with DR2000v configurations. A message is displayed when the deployment has completed successfully
10.
When prompted to deploy another DR2000v, type ‘y’ for yes or type ‘n’ for no as appropriate and press <Enter>.
The Deployment menu is displayed again.
 
NOTE: Before any remotely deployed DR2000v virtual appliance can be started, its virtual network adapters need to be manually connected to a virtual switch.
11.
Open local machine Hyper-V Manager. Navigate to Start Menu > Administrative Tools > Hyper-V Manager.
The Hyper-V Manager window is displayed.
12.
Right-click Hyper-V Manager and select Connect to Server.
13.
In Select Computer window, enter the name of the remote Hyper-V host that the DR2000v was remotely deployed to.
14.
Right-click the DR2000v virtual appliance and click Settings.
15.
On the Settings window, click the NIC0 hardware object and choose the Virtual Switch to connect, repeat this step for NIC1 and click OKto apply these settings.
16.
Right-click the DR2000v virtual appliance and click Startto self extract the installation packages and install other components.
17.
Right-click the DR2000v virtual appliance again and select Connect to view the installation process
Depending on your system resources, it may take 10 - 20 minutes to self extract installation packages and components.
18.
After installation, proceed with the initial setup and configuration of the DR2000v as described in the topic, “Configuring the DR2000v,” in this guide.
Parent topic 

使用支持的 DR2000v Hyper-V cmdlet

支持的 DR2000v Hyper-V cmdlet 包括创建新 DR2000v 功能以及关闭、还原和移除 DR2000v 功能。
支持的 cmdlet 包括在二进制模块 DELL-DR2000v.dll 和 DELL-DR2000v. psd1 中。该 .dll 和 .psd1 文件包括在已解压安装包的“bin”文件夹下。
要使用这些 cmdlet，必须确保满足“在 Microsoft Hyper-V 上部署 Dell DR2000v 的前提条件”主题中介绍的 Hyper-V 前提条件。
有关使用这些 cmdlet 的语法详情，请参阅以下主题。
•
New-DR2000v
•
Remove-DR2000v
•
Repair-DR2000v
•
Start-DR2000v
•
Stop-DR2000v
 
New-DR2000v
Remove-DR2000v
Repair-DR2000v
Start-DR2000v
Stop-DR2000v
 

New-DR2000v

用途
创建新的 DR2000v 虚拟机。
语法
New-DR2000v -Name <DR2000v name> -Image <absolute path to DR2000v Image zip> -Size <size of the image> [-ComputerName <VMHost Name>] [-UserName] <username> -Password <password>]
参数
•
Name：指定 DR2000v 名称。
•
Image: 指定 DR2000v 基本映像文件的 UNC 路径位置。在 PowerShell 中，这将提供 UNC 路径 $env:DR_ImagePath。例如：
New-DR2000v -Name DR2000v-New -Image $env:DR_ImagePath
•
Size：使用以下值之一指定映像大小：1TB、2TB 或 4TB。（请注意，4TB 仅适用于 Microsoft Hyper-V 2012 和 Microsoft Hyper-V 2012 R2。）
•
ComputerName：指定 Hyper-V 服务器名称、主机名或完全限定域名。
◦
可选参数。如果未指定，将使用本地主机名。
•
UserName：指定用户名。
◦
可选参数。如果未指定，cmdlet 将在当前用户上下文中运行。
•
Password：指定密码。
◦
可选参数。如果未指定，cmdlet 将在当前用户上下文中运行。
父主题 
使用支持的 DR2000v Hyper-V cmdlet

Remove-DR2000v

用途
删除 DR2000v 虚拟机。
语法
Remove-DR2000v –Name <DR2000v Name> -ComputerName <VMHost Name>] [-UserName <username> -Password <password>
参数
•
Name：指定 DR2000v 名称。
•
ComputerName：指定 Hyper-V 服务器名称、主机名或完全限定域名。
◦
可选参数。如果未指定，将使用本地主机名。
•
UserName：指定用户名。
◦
可选参数。如果未指定，cmdlet 将在当前用户上下文中运行。
•
Password：指定密码。
◦
可选参数。如果未指定，cmdlet 将在当前用户上下文中运行。
父主题 
使用支持的 DR2000v Hyper-V cmdlet
Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating