Converse agora com nosso suporte

Obtenha ajuda em tempo real
Concluir registro

Entrar

Solicitar preços

Entre em contato com o setor de vendas

Foglight for Integrations 5.9.0 - User and Reference Guide

Navegação de conteúdo

Using Foglight for Integrations

Understanding the Workflow

Alarms Workflow Service-Oriented Workflow SNMP Trap Receiver Workflow External Acknowledgement and Clearing of Alarms Workflow

Configuring Foglight for Integrations

Working in the Alarm Properties Dashboard Adding Configuration Item Properties Editing Alarm and Configuration Item Properties

Integration Samples

Receiving Alarms Samples Forwarding Alarms Samples Obtaining Integration Samples

Receiving Third-Party Alarms in Foglight

Preparing the Data Viewing Third-Party Alarms

Filtering Alarms Hiding Columns in the Alarms View Acknowledging Alarms Clearing Alarms Processing Alarms

Working with Configuration Items

Reviewing the Property Details of a Configuration Item Filtering Configuration Items Deleting Configuration Items Adding a Configuration Item to a Service

Using the CI Model in Service Builder

Selecting a Configuration Item in a Service Builder

Forwarding Alarms to Third-Party Systems

Forwarding Alarms Creating an XMLDump Script

Receiving SNMP Traps

Loading MIB Definitions Configuring Alarms from SNMP Trap Definitions Grouping SNMP Traps Configuring Agent Properties for the SNMP Trap Agent Troubleshooting

Receiving Acknowledged and Cleared Commands

Deploying and Configuring QMX Agents

Deploying QMX Agents Configuring QMX Agent Properties Configuring QMX

CI List View Alarm Properties View CI Properties View Configuration View SNMP Trap Groups View

CI Properties View

The CI Properties view lists all the properties that can be included on a Configuration Item. Supplied Properties are provided by default when the cartridge is installed. The properties that users add are Added Properties. Once defined, properties can be included in the XML for a Configuration Item.

This view allows you to add properties for a Configuration Item, so you can customize an installation to meet the needs of the customer. Users can define a (limited) data type for the property, along with a flag indicating whether many values are supported.

This view is located in the navigation panel of the Foglight user interface, under the Integration > Property Administration dashboard.

Figure 10. CI Properties view

For more information about how to add configuration item properties, see Adding Configuration Item Properties .

Table 10. Added properties and Supplied Properties
Data Type	Description
Name	A required field that assigns a unique Configuration Item property name.
Type	String: Can include numeric characters, alphanumeric characters, and symbols Boolean: True or False Integer: A whole number between the values of -2147483648 and 2147483647 Long: A whole number with a range larger than Integer Float: A 32-bit floating point number Double: A 64-bit floating point number
Is List	True — Set the property to allow multiple values False — Set the property to allow only one value

Configuration View

Use the Configuration view to quickly review the MIBs loaded in Foglight. The MIBs table and the Configure Traps table are displayed in this view.

The MIBs table lists the name of the MIB and the date the MIB was last updated. MIBs can be uploaded using the Upload MIB button. When updating, the user is prompted to locate the MIB file. Any errors found while loading MIBs is presented in the user interface.

In the Configure Trap table, a list of subsequent trap definitions associated with the loaded MIBs appears. This table provides a list of traps and their associated MIB name. It also includes the status indicating if the trap is enabled or disabled and the severity of the traps. The Format link allows you to format the alarm information being fed into Foglight.

This view is located in the navigation panel of the Foglight user interface, under Integration > SNMP Trap Administration > Configuration dashboard.

Figure 11. Configuration view

Table 11. Configure Trap Properties
Property	Description
Trap Name	The name of the trap that is provided in the MIB file used to load the trap.
MIB Name	The name of the MIB file that contained the trap.
Status	The status of a trap. The status can be either Enabled or Disabled.
Severity	The severity that is given to an alarm that is created when this trap is received.
Format	The configuration options for a Trap. Trap Variables: Trap variables are defined in the trap definition and passed in when a trap is received. They are sent as properties on the alarm. They can also be included in the message for the alarm. Description: The Description is defined in the trap definition and passed in when a trap is received. It is sent as a property on the alarm. It can also be included in the message for the alarm. OID: The OID of the trap as defined in the MIB file. Message Format: The message format that is provided on the alarm sent into Foglight based on the trap information. Trap variables can be specified in the message. For example, if the trap variable ifIndex is included in the message, it would be written ${ifIndex}. You can use the variables ${host} ${trapname} and ${technologyMonitor} in the message format. The ${host} is where the trap came from. Trap Duration: Forcing an end time on the event sent into Foglight. The end time would be the start time of the trap with the duration added to it. Setting the Trap Duration to zero keeps the trap alarm open until it clears.

For more information about how to work with SNMP traps, see Receiving SNMP Traps .

SNMP Trap Groups View

The SNMP Trap Group view allows you to group related traps together in order to manipulate alarms associated with the state of an object. Once a trap group is added, you can then add traps to the trap group.

Figure 12. SNMP Trap Groups view

If you choose to edit an SNMP Trap Group, a view of the Traps In Group table and the Ungrouped Traps table is displayed. The Traps In Group table is used to assign variables to make the traps specific to an object. The Ungrouped Traps table lists all traps that were loaded in Foglight. The trap can be included in the trap group by selecting the box next to the trap. When selected, the trap is removed from the Ungrouped Trap list and placed in the Traps in Group table.

This view is located in the navigation panel of the Foglight user interface, under Integration > SNMP Trap Administration > SNMP Trap Groups.

Figure 13. Edit Traps in Group view

For more information about how to work with SNMP traps, see Grouping SNMP Traps .

Documentos relacionados

The document was helpful.

Selecione a classificação

I easily found the information I needed.

Selecione a classificação

© ALL RIGHTS RESERVED. Terms of Use Privacy Cookie Preference Center