DR Series Software 3.2.6 - Command Line Reference Guide

ost --show [--config]

[--file_history] [--name <name>]
                 [--active_files] [--name <name>]
                 [--clients]
                 [--limits]


        --config         Displays OST configuration.
        --file_history   Display(s) history of last 10 OST optimized duplication image file(s).
        --name           OST container name.
        --active_files   Display(s) current OST image files being replicated.
        --name           OST container name.
        --clients        Displays OST clients.
        --limits         Replication speed limits.

Result

OST Login Entry User     : backup_user

Note: To display other types of OST configuration information, simply substitute the --file_history, --name <name>, or --clients options in the DR Series system CLI command.

Other Examples

Displays the last 10 replicated files that were processed via the DMA optimized duplication process for an OST container (in this example, the container is ost-99.)

ost --show --file_history --name ost-99

Data replication history:
File	/1339632000/ddt_unique_2_thr7
Target IP	10.250.201.49
Target ID 	6
Savings  	13.46%
Bytes 	12485760
Throughput 	352581KiB/s
Replicated At:	2012-06-20 09:08:00

File	/1339632000/ddt_unique_2_thr6
Target IP	10.250.201.49
Target ID 	6
Savings  	13.10%
Bytes 	10585760
Throughput 	352581KiB/s
Replicated At:	2012-06-20 09:08:05

File	/1339545600/ddt_unique
Target IP	10.250.201.49
Target ID 	6
Savings  	10.50%
Bytes 	10885750
Throughput 	77101KiB/s
Replicated At:	2012-06-20 09:08:34

Note: This example intentionally only shows three of the 10 replicated files that were processed.

Displays the OST clients, by running the command: ost --show --clients

Client	 acme-55
Plugin	 2.0.0
OS Windows Server 2008 R2 64-bit
Backup Software NetBackup 7.1.2012
Idle Time 00:01:10
Connections 1
Mode Dedupe

Note: The displayed output when using the DR Series system CLI ost --show --clients command could indicate a fourth type of mode value. Depending upon the client, this value would normally display Auto, Dedupe, or Passthrough. However, you could potentially display a mode value of Mixed, which indicates that you had changed the mode using the DR Series system CLI while the client is still connected.

Note: Be aware that the mode for clients that were connected to the OST media server before configuration changes might be different that what is shown in the displayed output when using the DR Series system CLI ost --show --clients command. The configuration changes will be updated and reflect any future connections.

To verify the current state of an OST client, you can check these two sources:

DR Series system CLI, using the ost --show --clients command
DR Series system GUI, displaying the Clients page

These sources display information about the connected and configured clients. For example, when a system is connected to multiple times, these sources show the number of connections to that client and the mode. You can also change the mode from dedupe to the other supported modes. When this is done the displayed mode will change, but any active connections will remain. There are essentially two possible modes: Dedupe and Passthrough. To verify the current mode of an OST client, you can check these two sources of client statistics:

DR Series system CLI, using the stats --container --name command
DR Series system GUI, displaying the Container Statistics page

In the Container Statistics page, click the Client Statistics tab (under Connection Type: OST) to display the Client Statistics table. If the Network Savings level in this table displays some savings and the displayed Bytes Ingested value is different from the displayed Bytes Transferred, this indicates that the OST clients are working in the Dedupe mode. If not, this indicates that the OST containers are working in the Passthrough mode.

Selecione seu produto:

Para podermos atendê-lo melhor, informe o Propósito de seu chat:

Soluções recomendadas para seu problema

DR Series Software 3.2.6 - Command Line Reference Guide

OST Command Usage

ost --show [--config] [--file_history] [--name <name>] [--active_files] [--name <name>] [--clients] [--limits]

Syntax

Result

Other Examples

ost --setpassword

Syntax

Result

ost --update --opdup_encryption <none | aes128 | aes256>

Syntax

Result