Converse agora com nosso suporte
Chat com o suporte

Foglight for Container Management 6.3.0 - Release Notes

Product licensing

Product licensing

Foglight includes a licensing capability that restricts access to those features that are defined in the license. Any Management Server installation requires a license that grants access to server-specific parts of the browser interface and the features associated with them. Foglight cartridges are also license-protected. While some cartridges are covered by the base Foglight license (such as Foglight Agent Manager cartridges and Foglight for Infrastructure), others may require an additional license.

For Foglight for Container Management, the Monitoring features are covered by Foglight Evolve Monitor, Cloud, Operate, and Flex license, while the Cost, Optimizer, and Capacity Management features are covered by Foglight Evolve Flex, Operate, and Cloud license.

 

To activate a trial or a purchased commercial license:

  1. On the navigation panel, under Dashboards, click Administration > Setup > Manage Licenses.
  2. Click Install.
  3. In the Install License dialog box, click Browse.
  4. In the file browser that appears, specify the location of the license file.
  5. In the Install License dialog box, click Install License.

 


Getting started with Foglight for Container Management

Getting started with Foglight for Container Management

Contents of the release package

Foglight for Container Management 6.3.0 is a software release, and consists of the .car file required for installation on the Management Server and the necessary documentation.

 

The Foglight for Container Management release package contains the following products:

1.    Foglight for Container Management version 6.3.0

  • vUsage-Feedback-6_3_0.car
  • DRP-6_3_0.car
  • OptimizerAutomation-6_3_0.car
  • CommonAnalytics-6_3_0.car
  • Optimizer-6_3_0.car
  • Container-Manager-6_3_0.car

2.    Product Documentation, including:

  • Foglight for Container Management Release Notes (this document, in HTML format)
  • Foglight for Container Management User and Administration Guide (PDF and online help)

Installation instructions

Foglight for Container Management 6.3.0 comes pre-installed on Foglight Evolve 6.3.0.

Foglight for Container Management can be installed on the Foglight Management Server versions listed in the Upgrade and Compatibility section.

 

To install Foglight for Container Management:

  1. Download the following packages from Quest Support Portal:
    • Foglight for Container Management version 6.3.0 (which includes the following cartridge files: vUsage-Feedback-6_3_0.car, DRP-6_3_0.car, OptimizerAutomation-6_3_0.car, CommonAnalytics-6_3_0.car, Optimizer-6_3_0.car, and Container-Manager-6_3_0.car )
  2. On the Cartridge Inventory dashboard, install the following cartridge files. The sequence of cartridge installation is important because of their dependencies:
    1. vUsage-Feedback-6_3_0.car
    2. DRP-6_3_0.car
    3. OptimizerAutomation-6_3_0.car
    4. CommonAnalytics-6_3_0.car
    5. Optimizer-6_3_0.car
    6. Container-Manager-6_3_0.car

Additional resources

Additional information is available from the following:

Globalization 

This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.

This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe, Far-East Asia, Japan.  

This release has the following known capabilities or limitations: This release is only localized for English but does support the Unicode character set.  

 


Contents of the release package

Getting started with Foglight for Container Management

Foglight for Container Management 6.3.0 is a software release, and consists of the .car file required for installation on the Management Server and the necessary documentation.

 

The Foglight for Container Management release package contains the following products:

1.    Foglight for Container Management version 6.3.0

  • vUsage-Feedback-6_3_0.car
  • DRP-6_3_0.car
  • OptimizerAutomation-6_3_0.car
  • CommonAnalytics-6_3_0.car
  • Optimizer-6_3_0.car
  • Container-Manager-6_3_0.car

2.    Product Documentation, including:

  • Foglight for Container Management Release Notes (this document, in HTML format)
  • Foglight for Container Management User and Administration Guide (PDF and online help)

Installation instructions

Foglight for Container Management 6.3.0 comes pre-installed on Foglight Evolve 6.3.0.

Foglight for Container Management can be installed on the Foglight Management Server versions listed in the Upgrade and Compatibility section.

 

To install Foglight for Container Management:

  1. Download the following packages from Quest Support Portal:
    • Foglight for Container Management version 6.3.0 (which includes the following cartridge files: vUsage-Feedback-6_3_0.car, DRP-6_3_0.car, OptimizerAutomation-6_3_0.car, CommonAnalytics-6_3_0.car, Optimizer-6_3_0.car, and Container-Manager-6_3_0.car )
  2. On the Cartridge Inventory dashboard, install the following cartridge files. The sequence of cartridge installation is important because of their dependencies:
    1. vUsage-Feedback-6_3_0.car
    2. DRP-6_3_0.car
    3. OptimizerAutomation-6_3_0.car
    4. CommonAnalytics-6_3_0.car
    5. Optimizer-6_3_0.car
    6. Container-Manager-6_3_0.car

Additional resources

Additional information is available from the following:

Globalization 

This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.

This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe, Far-East Asia, Japan.  

This release has the following known capabilities or limitations: This release is only localized for English but does support the Unicode character set.  

 


Installation instructions

Getting started with Foglight for Container Management

Contents of the release package

Foglight for Container Management 6.3.0 is a software release, and consists of the .car file required for installation on the Management Server and the necessary documentation.

 

The Foglight for Container Management release package contains the following products:

1.    Foglight for Container Management version 6.3.0

  • vUsage-Feedback-6_3_0.car
  • DRP-6_3_0.car
  • OptimizerAutomation-6_3_0.car
  • CommonAnalytics-6_3_0.car
  • Optimizer-6_3_0.car
  • Container-Manager-6_3_0.car

2.    Product Documentation, including:

  • Foglight for Container Management Release Notes (this document, in HTML format)
  • Foglight for Container Management User and Administration Guide (PDF and online help)

Foglight for Container Management 6.3.0 comes pre-installed on Foglight Evolve 6.3.0.

Foglight for Container Management can be installed on the Foglight Management Server versions listed in the Upgrade and Compatibility section.

 

To install Foglight for Container Management:

  1. Download the following packages from Quest Support Portal:
    • Foglight for Container Management version 6.3.0 (which includes the following cartridge files: vUsage-Feedback-6_3_0.car, DRP-6_3_0.car, OptimizerAutomation-6_3_0.car, CommonAnalytics-6_3_0.car, Optimizer-6_3_0.car, and Container-Manager-6_3_0.car )
  2. On the Cartridge Inventory dashboard, install the following cartridge files. The sequence of cartridge installation is important because of their dependencies:
    1. vUsage-Feedback-6_3_0.car
    2. DRP-6_3_0.car
    3. OptimizerAutomation-6_3_0.car
    4. CommonAnalytics-6_3_0.car
    5. Optimizer-6_3_0.car
    6. Container-Manager-6_3_0.car

Additional resources

Additional information is available from the following:

Globalization 

This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.

This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe, Far-East Asia, Japan.  

This release has the following known capabilities or limitations: This release is only localized for English but does support the Unicode character set.  

 


Documentos relacionados

The document was helpful.

Selecione a classificação

I easily found the information I needed.

Selecione a classificação