Converse agora com nosso suporte
Chat com o suporte

SharePlex 10.1.2 - Installation and Setup for Oracle Source

About this Guide Conventions used in this guide SharePlex pre-installation checklist Download the SharePlex installer Installation and setup for Oracle cluster Installation and setup for remote capture Install SharePlex on Linux and UNIX Install SharePlex on Windows Assign SharePlex users to security groups Set up an Oracle environment for replication Set up replication from Oracle to a different target type Generic SharePlex demonstration-all platforms Advanced SharePlex demonstrations for Oracle Solve Installation Problems Database Setup Utilities General SharePlex Utilities Uninstall SharePlex Advanced installer options Install SharePlex as root Run the installer in unattended mode SharePlex installed items

Run the installer in unattended mode

SharePlex can be installed unattended through the use of a response file. This installation method speeds the installation of multiple SharePlex instances. The file supplies responses to the standard installer prompts, while providing on screen status information.

Note:When running in unattended mode, the installation process does not call the system password utility. If you create a new SharePlex user during the installation, that user will remain locked until the password is set manually.

Response files that you can edit are located in the install subdirectory of the SharePlex product (installation) directory:

/productdir/install

Enter responses in the file

Important! The response file contains two sections. Only the top section is user configurable. Do not edit the bottom section. The bottom section begins with the line "Do not change settings that appear below."

Edit the top section of the response file to provide the responses for the installation. Only edit the values to the right of the colon, and make certain there is a space between the colon and the response.

The following example is for non-root installation:

# To install SharePlex with the unattended option please

# modify the settings below. You may safely modify only the values

# to the right of the colon, and the colon must be immediately

# followed by a space. Editing the values to the left of the colon

# may impact the unattended install causing the process to become

# interactive.

#

SharePlex Admin group: spadmin

product directory location: /home/splex/proddir

variable data directory location: /home/splex/vardir

# not required for Open Target installations # ORACLE_SID that corresponds to this installation: oracledb

# not required for Open Target installations# ORACLE_HOME directory that corresponds to this ORACLE_SID: /home/oracle/products/version

TCP/IP port number for SharePlex communications: 2100

the License key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXX

the customer name associated with this license key: SharePlex_Trial

To run the response file

From the command shell of the operating system, run the .tpm installation file with the -r option followed by the full path to the response file.

# ./installation_file -r /users/shareplex/product.rsp

Next Steps

For additional setup requirements, see the Next Steps section in one of the following depending on the platform:

Install SharePlex on Linux/Unix for Oracle Database

Install SharePlex on Linux/Unix for Open Target Databases

SharePlex installed items

The following describes the items that are installed during the SharePlex setup process.

SharePlex Directories

SharePlex uses two main directories:

The product directory: This is the SharePlex installation directory, where the SharePlex programs and libraries are stored.

The variable-data directory: This is the SharePlex working directory, where the queue files, log files and other components that comprise the current replication environment are stored.

Note: These directories are often referred to as productdir and vardir, respectively.

Do not remove, rename or edit any files or directories installed by SharePlex. Some directories contain hidden files that are essential for replication. Some files appear empty but must exist under their original names because they are referenced by one or more SharePlex processes. Some items in the directories are for use only under the supervision of Quest Technical Support.

Programs meant for general use in a production environment are documented in the published SharePlex documentation. If you do not find documentation for a program in a SharePlex directory, do not attempt to run it. Contact Quest Technical Support first.

The directory structure and files within the two main SharePlex directories differs slightly between the UNIX and Windows platforms. Files and directories can vary from version to version of SharePlex, but the basic structure appears as follows.

SharePlex product directory
Sub-directory Contents
BACKUP Uninstall information
bin SharePlex executable files
config Internally used content.
data Default parameter settings
doc Catalog of exception messages
install (Unix and Linux only) Scripts related to installation, licensing and upgrades
lib SharePlex shared libraries
log SharePlex log files
mks_oe Runtime installation files for third-party software used by SharePlex.
util SharePlex utilities
.app-modules (Unix and Linux only) Hidden internal directory that contains raw executables. Do not use the contents of this directory to launch processes.
.meta-inf (Unix and Linux only) Hidden internal directory that contains meta information used during the installation process.
SharePlex variable-data directory
Sub-directory Contents
config Configuration files for this installation of SharePlex.
data Status Database, configuration activation information, user-defined parameter settings, and other user-defined files that direct replication activities.
db Configuration internal database for each activation of a configuration file.
downgrd Information about SharePlex targets that are a lower version than the source.
dump Core files (if a process fails)
log SharePlex log files
rim Queue files (working data files)
save Information about active and inactive configurations.
state Information about the current state of SharePlex when a configuration is active, such as the object and sequence caches.
temp Used by the copy and append features and other SharePlex sync-related processes.
oos Stores the transactions that contain out-of-sync operations when the SP_OPO_SAVE_OOS_TRANSACTION parameter is enabled.

SharePlex Installed Objects

Much of the replication process is controlled and tracked through a series of internal objects that are installed into the source or target database during the installation of SharePlex. They are essential for SharePlex to operate, so do not alter them in any way.

NOTE: Not all objects are used for all databases. Most are used for Oracle databases. If you do not see an object in your database, it is not relevant to the database, or the information is stored internally within the SharePlex configuration. If you see an object that is in your database but not in this list, it is not being used in the current release.

Table

Object type

Description
DEMO_SRC

Table

Used as the source table for the SharePlex demonstrations.
DEMO_DEST

Table

Used as the target table for the SharePlex demonstrations.
SHAREPLEX_ACTID

Table

Used by Capture to checkpoint its state.
SHAREPLEX_ANALYZE

Table

Used by the analyze command.
SHAREPLEX_CHANGE_OBJECT

Table

Used by users to stop and resume replication for an object.
SHAREPLEX_COMMAND

Table

Used for the flush, abort and purge commands.
SHAREPLEX_CONFIG

Table

Used by the activation and Capture processes to mark the start of a new activation.
SHAREPLEX_DATA

Table

Used by the SharePlex wallet for Oracle TDE replication.
SHAREPLEX_DATAEQUATOR

Table

Used by the compare and repair commands and the Post process to synchronize their operations.
SHAREPLEX_DATAEQUATOR_INSERT_TEMP

Table

Used as a temporary table by the compare and repair commands.
SHAREPLEX_DATAEQUATOR_UPDATE_TEMP

Table

Used as a temporary table by the compare and repair commands.
SHAREPLEX_DATAEQUATOR_DELETE_TEMP

Table

Used as a temporary table by the compare and repair commands.
SHAREPLEX_DDL_CONTROL

Table

Used to refine control of DDL that is enabled for replication by the SP_OCT_REPLICATE_ALL_DDL parameter.

SHAREPLEX_JOBID

Sequence

Used by the sp_cnc process and the compare, repair, and copy commands to provide a unique job ID.

SHAREPLEX_JOBS

Table

Used by the sp_cnc process and the compare, repair, and copy commands to store information about a job.
SHAREPLEX_JOB_STATS

Table

Used by the sp_cnc process and the compare, repair, and copy commands to store information about a job.
SHAREPLEX_JOBS_CONFIG

Table

Used by the disable jobs and enable jobs commands.
SHAREPLEX_LOB_CACHE

Table

Used by the Capture process when processing VARRAYs stored as LOB.
SHAREPLEX_LOBMAP

Table

Used by the Capture process to map LOBIDs and rows when a table with LOB columns does not have PK/UK logging enabled.
SHAREPLEX_LOGLIST

Table

Used by the Capture process to track inactive RAC instances.
SHAREPLEX_MARKER

Table

Used by the Read process when PK/UK logging is not enabled.
SHAREPLEX_OBJMAP

Table

Used by the activation and Capture processes to define the objects in replication.
SHAREPLEX_PARTITION_CACHE

Table

Used by the Capture process to map Oracle partition IDs to tables in replication.
SHAREPLEX_SYNC_MARKER

Table

Used by the copy command and the Read and Post processes to sync their operations.

SHAREPLEX_TRANS

or

SHAREPLEX_OPEN_TRANS

Table

Used by the Post process to store checkpoints and to mark transactions that were applied in a primary-to-primary configuration.

MKS Toolkit

On the Windows platform, SharePlex installs the MKS Toolkit® operating environment from Parametric Technology Corporation (PTC), formerly known as Mortice Kern Systems NuTCRACKER. This software enables SharePlex to be ported to all supported platforms in a uniform manner.

SharePlex users have no interaction with the MKS Toolkit software, other than to ensure that its service is running when the SharePlex service is running. The MKS Toolkit is installed in automatic startup mode by default when it is installed during SharePlex installation.

The default folder for MKS Toolkit is C:\Program Files\MKS Toolkit, but a different folder might have been selected during installation. The MKS Toolkit files must not be moved after they are installed.

SharePlex Registry Entries

On Windows systems, SharePlex installs the following Registry entries.

  • \HKEY_LOCAL_MACHINE\Software\Wow6432node\Quest Software\SharePlex: This contains the SharePlex environment information and is where any user-created variables must be entered, such as SP_SYS_VARDIR. Each instance of SharePlex is defined in the Registry as a port number, and each has its own set of environment variables.
  • \HKEY_LOCAL_MACHINE\Software\Wow6432node\Mortice Kern Systems: This contains Registry entries for the MKS Toolkit® operating environment.
  • \HKEY_LOCAL_MACHINE\Software\Wow6432node\Datafocus: This contains Registry entries for the MKS Toolkit® operating environment.
Documentos relacionados

The document was helpful.

Selecione a classificação

I easily found the information I needed.

Selecione a classificação