Use the shutdown command to shut down replication. Upon completion of the shutdown command, SharePlex shuts down sp_ctrl automatically.
The basic shutdown command shuts down sp_cop (the SharePlex service on Windows systems) and all other SharePlex processes gracefully, saving the state of each process, performing a checkpoint to disk, read-releasing buffered data, and cleaning up child processes. Data in the queues remains safely in place, ready for processing when an authorized user starts sp_cop again.
The shutdown command with the [force] option kills the SharePlex processes immediately, whether or not the normal shutdown procedures were completed. SharePlex recovers from a forced shutdown when you start sp_cop, but replication processing resumes from a previous save point, which means startup can be slightly longer.
Use the [force] option only if you tried to shut down SharePlex gracefully, but child processes remained running. You can verify whether SharePlex processes are still running by issuing the ps -ef | grep sp_ command in the command shell or by viewing the Processes tab in Windows Task Manager.
Important: If you shut down replication and users continue changing the objects in the active configuration(s), it is possible for the Oracle redo logs to wrap before SharePlex starts again. If the delay is long and the archive logs become unavailable, you will need to re-synchronize the data. The redo logs should be large and numerous enough to accommodate the time SharePlex will be shut down. For more information about the proper sizing of the redo logs for replication, see the SharePlex Installation and Setup Guide.
| Supported sources: | Oracle |
| Supported targets: | All |
| Authorization level: | Administrator (1) |
| Issued for: | source or target system |
| Related commands: | startup |
| Basic command | Command options | Remote options |
|---|---|---|
| shutdown |
[force] |
[ on host | on host:portnumber | on login/password@host | on login/password@host:portnumber ] |
| Component | Description |
|---|---|
| force |
This option shuts down all replication processes, including sp_cop, immediately, whether or not they have finished reading from or writing to a queue. Use this option if the default shutdown command fails or you cannot wait for a graceful shutdown. Example: sp_ctrl(sysA)> shutdown force |
These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.
| Option | Description |
|---|---|
| on host |
Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on SysA |
| on host:portnumber |
Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on SysA:8304 |
| on login/password@host |
Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on john/spot5489@SysA |
| on login/password@host:portnumber |
Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304 |
Use the start command to start a replication process after it was stopped using the stop or abort [service] command, or after Post was stopped by the flush command.
| Supported sources: | Oracle |
| Supported targets: | All |
| Authorization level: | Operator (2); Administer (1) required for Capture |
| Issued for: | source or target system |
| Related commands: | stop |
| Basic command | Command options | Remote options |
|---|---|---|
| start service |
[to host] [from host] [for datasource] [for datasource-datadest] [queue queuename] |
[ on host | on host:portnumber | on login/password@host | on login/password@host:portnumber ] |
| Component | Description |
|---|---|
| service |
The SharePlex process you want to start. Valid values are:
Example: sp_ctrl(sysA)> start export |
| to host |
This option starts Export to a designated target system only. • to is a required part of the syntax. • host is the name of the target system. Example: sp_ctrl(sysA)> start export to sysB In this example, Export is started from sysA to sysB. |
| from host |
This option starts Import from a designated source system only.
Example: sp_ctrl(sysD)> start import from sysA In this example, Import is started on sysD from sysA. |
| for datasource |
This option starts Capture or Read for a designated datasource.
Example: sp_ctrl(sysA)> start read for o.oraA In this example, Read is started on sysA for instance oraA. |
| for datasource-datadest |
This option starts Post for a designated source SID-target SID data stream only.
Example: sp_ctrl(sysC)> start post for o.oraA-r.mssA In this example, Post is started on sysC for instance oraA replicating to SQL Server database mssA. |
| queue queuename |
This option starts the Export, Import or Post process associated with a designated named queue. • queue is a required part of the syntax. • queuename is the named of the queue as written in the configuration file. Example: sp_ctrl(sysA)> start export queue QA In this example, Export of data through named export queue QA is started on sysA. |
These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.
| Option | Description |
|---|---|
| on host |
Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on SysA |
| on host:portnumber |
Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on SysA:8304 |
| on login/password@host |
Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on john/spot5489@SysA |
| on login/password@host:portnumber |
Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304 |
Use the startup command to start all processes at once. All of the processes will start unless they were stopped with the stop command prior to shutting down sp_cop.
When there is an active configuration, replication normally starts automatically when you start sp_cop from the command line.
| Supported sources: | Oracle |
| Supported targets: | All |
| Authorization level: | Administrator (1) |
| Issued for: | source or target system |
| Related commands: | shutdown |
| Basic command | Remote options |
|---|---|
| startup |
[ on host | on host:portnumber | on login/password@host | on login/password@host:portnumber ] |
These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.
| Option | Description |
|---|---|
| on host |
Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on SysA |
| on host:portnumber |
Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on SysA:8304 |
| on login/password@host |
Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on john/spot5489@SysA |
| on login/password@host:portnumber |
Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304 |
Use the status command to view a summary of the status of replication on a system, to ensure that processes are running and to check for errors, warnings or notices. For a more detailed status report, use the lstatus command.
The status display shows:
SharePlex updates the status display at intervals determined by the SP_COP_IDLETIME parameter.
| Supported sources: | Oracle |
| Supported targets: | All |
| Authorization level: | Viewer (3) |
| Issued for: | source or target system |
| Related commands: | lstatus, qstatus, show, show statusdb |
| Basic command | Remote options |
|---|---|
| status |
[ on host | on host:portnumber | on login/password@host | on login/password@host:portnumber ] |
These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.
| Option | Description |
|---|---|
| on host |
Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on SysA |
| on host:portnumber |
Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on SysA:8304 |
| on login/password@host |
Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on john/spot5489@SysA |
| on login/password@host:portnumber |
Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax. Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304 |
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Terms of Use Privacy Cookie Preference Center
