The Start-RestoreAgent
cmdlet lets you restore a protected machine or volume from a specific Rapid Recovery recovery point.
The usage for the command is as follows:
Start-RestoreAgent -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [name] -targetvolume [volume name] -forcedismount -autorestart
The following table describes the options available for the Start-RestoreAgent
command:
Option | Description |
---|---|
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-protectedserver |
The name or IP address of the server you want to restore. |
-rpn |
The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps . |
-volumes |
The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all . |
-targetmacchine |
The name of the machine to which you want to restore the protected machine. |
-targetvolume |
The name or ID of the volume to which you want to restore the machine. |
-forcedismount |
Optional. Use this option to force the dismount of the database on demand. |
-autorestart |
Optional. Use this command if restarting an Exchange Server machine is necessary. |
Restore a machine to a protected machine with the IP address 192.168.20.130, including the force database dismount option:
>Start-RestoreAgent -protectedserver 192.168.20.130 -rpn 259 -volumes "F:" "E:" "C:" -targetmachine 192.168.20.174 -targetvolume "E:" "G:" "F:" -forcedismount
Businesses often use long-term storage to archive both compliant and non-compliant data. The archive feature in Rapid Recovery is used to support the extended retention for compliant and non-compliant data. The administrator can save an archive on the local storage or network location by specifying the -Path
command and credentials.
The usage for the command is as follows:
Start-RestoreArchive -core [host name] -user [login] -password [password] -all | -protectedserver [name | IP address | "[name1 | IP address1]" "[name2 | IP address2]"] -repository [name] -archiveusername [name] -archivepassword [password] -path [location] -cloudaccountname [name] -cloudcontainer [name]
The following table describes the options available for the Start-RestoreArchive
command:
Option | Description |
---|---|
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.
If none are provided, then the logged-on user's credentials will be used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.
If none are provided, then the logged-on user's credentials will be used. |
-all |
Archive recovery points for all protected machines. |
-protectedserver |
The protected machine with recovery points that you want to archive. You can specify multiple machine names enclosed in double quotes and separated by commas. |
-repository |
The name of the repository where you want to place restored recovery points. You must enclose the name in double quotes; for example, "Repository1." |
-archiveusername |
Optional. The user name for logging in to the remote machine. It is required for a network path only. |
-archivepassword |
Optional. The password for logging in to the remote machine. It is required for a network path only. |
-path |
The path to where to save the archived data. For example:
Note: The number of symbols should not be greater than 100 for local and network locations, and should not be greater than 150 for a cloud location. |
-cloudaccountname |
Optional. Use only for cloud archiving. The name of the cloud account where you want to save the archive. |
-cloudcontainer |
Optional. Use only for cloud archiving. The name of the cloud container in the chosen cloud account, where the archive will be saved. When you use this option, you should also specify the "-cloudaccountname" parameter. |
-manifestcore |
Optional. Specify the Core that you want to use from the manifest of the restored archive. |
Archive all recovery points for all machines on the Core and store them on the local machine:
>Start-RestoreArchive -path D:\work\archive -startdate 'Example 04/30/2012' –all
The Start-RestoreSettings
cmdlet lets you restore the Core configuration from a backup.
The usage for the command is as follows:
Start-RestoreSettings -localpath [local path] -restorerepositories
The following table describes the options available for the Start-RestoreSettings
command:
Option | Description |
---|---|
-? |
Display this help message. |
-localpath |
The path of the configuration backup. |
-restorerepositories |
Optional. Restores repositories as well as the configuration. |
Restore the settings of only the Core:
>Start-RestoreSettings -localpath D:\work\archive
Restore the settings of the Core with repositories:
>Start-RestoreSettings -localpath D:\work\archive -restorerepositories
The Start-RestoreUrc
cmdlet lets you restore a protected machine or volume from a specific recovery point to a bare-metal machine using the Universal Recovery Console (URC).
The usage for the command is as follows:
Start-RestoreUrc -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [IP address] -urcpassword [password from the URC] -targetdisk [disk number | all]
The following table describes the options available for the Start-RestoreUrc
command:
Option | Description |
---|---|
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-protectedserver |
The name or IP address of the server you want to which you want to restore the URC. |
-rpn |
The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps . |
-volumes |
The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all . |
-targetmacchine |
The name of the machine to which you want to restore the protected machine. |
-urcpassword |
The authentication key from the URC. |
-targetdisk |
The numbers of the disks on which you want to restore the machine. To select all disks from the machine using the URC, use -targetdisk all . |
Restore a machine to disks 0 and 1 of the machine using the URC, when the IP address for the URC machine is 192.168.20.175:
>Start-RestoreUrc -protectedserver 192.168.20.130 -rpn 259 -volumes "C:" "E:" -targetmachine 192.168.20.175 -urcpassword ******** -targetdisk 0 1
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. 이용 약관 개인정보 보호정책 Cookie Preference Center