지금 지원 담당자와 채팅
지원 담당자와 채팅

Rapid Recovery 6.3 - Command Line and Scripting Reference Guide

Rapid Recovery overview and system requirements Command Line Management Utility PowerShell Module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-CredentialsVaultAccount AddEncryptionKeytoProtectedMachine Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-ActiveBlockMapping Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-EsxServerProtectionRules Edit-ExcludedFilesAndFolders Edit-HyperVClusterProtectionRules Edit-HyperVServerProtectionRules Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-CredentialsVaultAccounts Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstanceMetadata Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-ProtectionRules Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes Join-CredentialsVaultAccount New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Open-DvmRepository Push-Replication Push-Rollup Remove-Agent Remove-CredentialsVaultAccount Remove-EncryptionKey Remove-EsxAutoProtectObjects Remove-EsxVirtualMachines Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Scheduler Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-CredentialsVaultAccount Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-BackupSettings Start-ChecksumCheck Start-ConfigureAgentMigration Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-RestoreSettings Start-RestoreUrc Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Update-Repository
Localization Qualifiers
Scripting

Resume-ScheduledArchive

The Resume-ScheduledArchive command lets you resume a scheduled archive that had been paused or stopped.

Usage

The usage for the command is as follows: 

Resume-ScheduledArchive -core [host name] -user [user name] -password [password] -all -ids [id | id1 id2]
Command Options

The following table describes the options available for the Resume-ScheduledArchive command:

Table 168: Resume-ScheduledArchive command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-all
 Use this option to force all scheduled archives. 
-ids
 The identifier (ID) or IDs separated by spaces of the scheduled archives that you want to force.
Examples:

Resume all scheduled archives: 

>Resume-ScheduledArchive -all

Resume one scheduled archive: 

>Resume-ScheduledArchive -ids 6c123c39-5058-4586-bd0c-7c375e72017b

Resume multiple scheduled archives: 

>Resume-ScheduledArchive -ids 6c123c39-5058-4586-bd0c-7c375e72017b, 26c29bb7-b320-47f5-b5a8-dffc49f50e25

Resume-Scheduler

The Resume-Scheduler cmdlet lets you resume a paused task scheduler for a specified Core.

Usage

The usage for the command is as follows: 

Resume-Scheduler -core [host name] -user [user name] -password [password]
Command Options

The following table describes the options available for the Resume-Scheduler command:

Table 169: Resume-Scheduler command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

Examples:

Resume the task scheduler:

>Resume-Scheduler -core 10.10.127.42 -user admin -password 676df#df

Resume-Snapshot

The Resume-Snapshot PowerShell cmdlet lets you resume a suspended backup snapshot.

Usage

The usage for the command is as follows: 

Resume-Snapshot -core [host name] -user [user name] -password [password] -all | -protectedserver [name | IP address]
Command Options

The following table describes the options available for the Resume-Snapshot command:

Table 170: Resume-Snapshot command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used. 
-all
 All protected servers. 
-protectedserver
 Resume snapshot for the specified machine.
Examples:

Resume snapshots for the protected machine with IP 10.10.10.4 for the local Core: 

>Resume-Snapshot -protectedserver 10.10.10.4

Resume-VirtualStandby

The Resume-VirtualStandby cmdlet lets you resume suspended continual virtual export (also known as virtual standby). For details about the cmdlet to pause continual virtual export, see Suspend-VirtualStandby.

Usage

The usage for the command is as follows: 

Resume-VirtualStandby -core [host name] -user [login] -password [password] -all | -protectedserver [name(s) | IP address]
Command Options

The following table describes the options available for the Resume-VirtualStandby command:

Table 171: Resume-VirtualStandby command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-all
 Resume exports for all virtual standby machines. 
-protectedserver
 The name or names—separated by a comma and space—of the protected machines with virtual standby machines that you want to resume.
Examples:

Resume virtual standby exports for a protected machine: 

>Resume-VirtualStandby -core 10.10.10.10:8006 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22
관련 문서

The document was helpful.

평가 결과 선택

I easily found the information I needed.

평가 결과 선택