In NetVault, the Drive Transfer Buffer Size option is set to 8 MiB by default.To ensure that this configuration is supported on your system. If this value is too high, change it to 257 KiB in the template file by , completing the following steps.
1 |
Open the file “drives.tpl” in a text editor. |
2 |
NOTE: If Drive Transfer Buffer Size is set too high and NetVault fails to allocate the transfer buffers, the backup jobs using tape devices show reduced performance. |
1 |
In the Navigation pane, click Guided Configuration, and then on the NetVault Configuration Wizard page, click Add Storage Devices. |
2 |
4 |
In the Choose drive table, select the device that you want to add. |
5 |
If the device is connected to multiple clients (for example, in a SAN setup), all host clients are listed in the Choose Machines table. To share the drive with multiple clients, select the clients in the Choose Machines table, and click Next. |
1 |
In the Navigation pane, click Guided Configuration, and then on the NetVault Configuration Wizard page, click Add Storage Devices. |
2 |
4 |
In the Choose library table, select the device that you want to add. |
6 |
If the library is not configured automatically, click Add drives manually. You can also use this method to assign the drives to different clients or to share the drive with multiple clients. |
a |
In the Choose Machine table, select the client to which the drive is attached. If the device is connected to multiple clients, select any one client. |
• |
Scan for devices: To scan the client again for attached devices, select this option. |
• |
Do not scan for devices: To use the previous scan results, select this option. |
• |
Scan only filer: To scan for devices attached to a particular filer, select this option, and then select the applicable filer. |
To leave the remaining bays empty and complete the library addition with the required drives, click Leave remaining bays empty. |
b |
c |
If the device is connected to multiple clients (for example, in a SAN setup), all host clients are listed in the Choose Machines table. To share the drive with multiple clients, select the clients in the Choose Machines table, and click Next. |
© ALL RIGHTS RESERVED. Termini di utilizzo Privacy Cookie Preference Center