Chatee ahora con Soporte
Chat con el soporte

Rapid Recovery 6.3 - Command Line and Scripting Reference Guide

Rapid Recovery overview and system requirements Command Line Management Utility PowerShell Module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-CredentialsVaultAccount AddEncryptionKeytoProtectedMachine Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-ActiveBlockMapping Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-EsxServerProtectionRules Edit-ExcludedFilesAndFolders Edit-HyperVClusterProtectionRules Edit-HyperVServerProtectionRules Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-CredentialsVaultAccounts Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstanceMetadata Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-ProtectionRules Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes Join-CredentialsVaultAccount New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Open-DvmRepository Push-Replication Push-Rollup Remove-Agent Remove-CredentialsVaultAccount Remove-EncryptionKey Remove-EsxAutoProtectObjects Remove-EsxVirtualMachines Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Scheduler Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-CredentialsVaultAccount Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-BackupSettings Start-ChecksumCheck Start-ConfigureAgentMigration Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-RestoreSettings Start-RestoreUrc Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Update-Repository
Localization Qualifiers
Scripting

PreTransferScript.sh

The PreTransferScript is run on the protected Linux machine immediately before the backup snapshot transfer begins.

NOTE: For clarification on when pre and post scripts are run, see .Using Bourne shell and Bash scripting with Rapid Recovery.

The following script stores the values from input parameters in PreTransferScriptResult.txt, which is stored in the root home directory.

Sample PreTransferScript

#!/bin/bash
echo "TransferPrescriptParameter_VolumeNames=$TransferPrescriptParameter_VolumeNames
TransferPrescriptParameter_ShadowCopyType=$TransferPrescriptParameter_ShadowCopyType
TransferPrescriptParameter_Key=$TransferPrescriptParameter_Key
TransferPrescriptParameter_ForceBaseImage=$TransferPrescriptParameter_ForceBaseImage
TransferPrescriptParameter_IsLogTruncation=$TransferPrescriptParameter_IsLogTruncation
TransferPrescriptParameter_LatestEpochSeenByCore=$TransferPrescriptParameter_LatestEpochSeenByCore" > ~/PreTransferScriptResult.txt
exit 0

PostTransferScript.sh

The PostTransferScript is run on the protected Linux machine after the backup snapshot process has fully completed.

NOTE: For clarification on when pre and post scripts are run, see .Using Bourne shell and Bash scripting with Rapid Recovery.

The following script stores the values from input parameters in PostTransferScriptResult.txt, which is stored in the root home directory.

Sample PostTransferScript

#!/bin/bash
echo "TransferPostscriptParameter_VolumeNames=$TransferPostscriptParameter_VolumeNames
TransferPostscriptParameter_ShadowCopyType=$TransferPostscriptParameter_ShadowCopyType
TransferPostscriptParameter_Key=$TransferPostscriptParameter_Key
TransferPostscriptParameter_ForceBaseImage=$TransferPostscriptParameter_ForceBaseImage
TransferPostscriptParameter_IsLogTruncation=$TransferPostscriptParameter_IsLogTruncation
TransferPostscriptParameter_LatestEpochSeenByCore=$TransferPostscriptParameter_LatestEpochSeenByCore" > ~/PostTransferScriptResult.txt
exit 0

PreSnapshotScript.sh

The PreSnapshotScript is run on the protected Linux machine after preparation but before data is read from the original device when capturing a snapshot. This script does not receive parameters from the protected machine.

NOTE: For clarification on when pre and post scripts are run, see .Using Bourne shell and Bash scripting with Rapid Recovery.

The following script returns the time that the script completed on the machine in hours, minutes, and seconds, based on the system time of the Core. This information is logged in PreSnapshotScriptResult.txt, which is stored in the root home directory.

Sample PreSnapshotScript

#!/bin/bash
echo "`date +%H:%M:%S` PreSnapshot script has been executed." > ~/PreSnapshotScriptResult.txt
exit 0

PostSnapshotScript.sh

The PostSnapshotScript is run on the protected Linux machine after data is read from the original device when capturing a snapshot, but before data is read from the copied device. This script does not receive parameters from the protected machine.

NOTE: For clarification on when pre and post scripts are run, see .Using Bourne shell and Bash scripting with Rapid Recovery.

The following script returns the time that the script completed on the machine in hours, minutes, and seconds, based on the system time of the Core. This information is logged in PostSnapshotScriptResult.txt, which is stored in the root home directory.

Sample PostSnapshotScript

#!/bin/bash
echo "`date +%H:%M:%S` PostSnapshot script has been executed." > ~/PostSnapshotScriptResult.txt
exit 0
Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación