立即与支持人员聊天
与支持团队交流

Identity Manager 9.2 - Web Designer Web Portal User Guide

General tips and getting started Managing reports Security keys (WebAuthn) Requests
Setting up and configuring request functions Requesting products Managing the Saved for Later list Pending requests Displaying request history Resubmitting requests Canceling requests Renewing products with limit validity periods Unsubscribing products Displaying requests Undoing approvals Managing request inquiries directed at you Auditing requests Escalated requests
Attestation
Managing attestations Attestors for attestation cases My attestation cases Pending attestations Displaying attestation history Managing attestation inquiries directed at you Auditing attestations Escalation
Compliance Responsibilities
My responsibilities
Specifying keywords for requestable products Managing my departments Managing my application roles Managing my devices Managing my business roles Managing my identities Managing my cost centers Managing my multi-request resources Managing my multi requestable/unsubscribable resources Managing my resources Managing my software applications Managing my locations Managing my system entitlements Managing my system roles Managing my assignment resources
Managing task delegations Ownerships Auditing
Auditing departments Auditing application roles Auditing devices Auditing business roles Auditing identities Auditing cost centers Auditing multi-request resources Auditing multi requestable/unsubscribable resources Auditing resources Auditing software Auditing locations Auditing system roles Auditing system entitlements Auditing assignment resources
Governance administration
Managing departments Managing business roles Managing identities Managing cost centers Managing multi-request resources Managing multi requestable/unsubscribable resources Managing resources Managing locations System entitlements Managing system roles Managing assignment resources
Opening other web applications Managing tickets Discovering your statistics on the home page Appendix: Attestation conditions and approval policies from attestation procedures Appendix: Page and menu descriptions
Information (menu description) My requests (menu description) Profile (menu description) Help (menu description) Request (menu description) Attestation (menu description)
My attestation status (page description) My actions (page description)
Pending attestations (page description)
Pending attestations – Attestation policies (page description) Pending attestations: One Identity Manager application roles (page description) Pending attestations: Departments (page description) Pending attestations: System roles (page description) Pending attestations: Locations (page description) Pending attestations: Business roles (page description) Pending attestations: PAM assets (page description) Pending attestations: PAM user accounts (page description) Pending attestations: Identities (page description) Pending attestations: Cost centers (page description) Pending attestations: User accounts (page description) Pending attestations: System entitlements (page description) Pending attestations: Resources (page description) Pending attestations: Assignment resources (page description) Pending attestation: Multi-request resources (page description) Pending attestations: Software (page description) Pending attestations: Multi requestable/unsubscribable resources (page description) Pending attestations: Devices (page description) Pending attestations – approvals (page description)
Attestation history (page description) Attestation inquiries (page description)
Auditing (page description) Governance administration (page description) Attestation escalation approval (page description)
Compliance (menu description) Responsibilities (menu description)
My responsibilities (page description)
Identities (page description) System entitlements (page description) Business roles (page description) System roles (page description) Departments (page description) Cost centers (page description) Locations (page description) Application roles (page description) Resources (page description) Assignment resources (page description) Multi-request resources (page description) Software (page description) Multi requestable/unsubscribable resources (page description) Devices (page description)
Delegating tasks (page description) Ownerships (page description) Auditing (page description)
Auditing – Departments (page description) Auditing – Application roles (page description) Auditing – Device (page description) Auditing – Business roles (page description) Auditing – Identity details (page description) Auditing – Cost center (page description) Auditing – Multi-request resources (page description) Auditing – Multi requestable/unsubscribable resources (page description) Auditing - Resources (page description) Auditing – Software (page description) Auditing – Locations (page description) Auditing – System roles (page description) Auditing - Assignment resource (page description) Auditing – Active Directory (page description) Auditing – Azure Active Directory (page description) Auditing – Custom target system group (page description) Auditing – Google Workspace (page description) Auditing – Domino (page description) Auditing – LDAP (page description) Auditing – Oracle E-Business Suite (page description) Auditing – Privileged Account Management (page description) Auditing – SAP R/3 (page description) Auditing – Unix (page description)
Governance administration (page description)
Business roles (page description) Identities (page description) Multi-request resources (page description) Multi requestable/unsubscribable resources (page description) Organization (page description) Resources (page description) System entitlements (page description) System roles (page description) Assignment resources (page description)
Tickets (menu description)

Displaying rule violations of pending requests

You can view which rule violations can be caused by requests if they are granted approval.

To display the rule violations of a pending request

  1. On the My Actions page, click Pending Requests.

  2. On the Pending Requests page, click the request whose rule violations you want to display.

  3. In the View Request Details pane, click the Rule Violations tab.

Approving and denying requests

If you are the approver of a particular product and an identity makes a request for this product, you can grant or deny approval for the request. If you approve a request, the product is available to the identity.

To make an approval decision about a pending request

  1. In the menu bar, click Request > My Actions.

  2. On the My Actions page, click Pending Requests.

  3. On the Pending Requests page, perform one of the following actions:

    • To approve a request, click (Approve) next to the request.

    • To deny a request, click (Deny) next to the request.

    TIP: To grant or deny approval for all the requests displayed, click (Approve all) or (Deny all).

  4. Click Next.

  5. On the Pending Requests - Approvals page, perform one of the following actions:

    • For approved requests:

      • To provide a reason for all approved requests, enter the reason in the Reason for approvals field.

      • To use a predefined standard reason for all approved requests, select the reason in the Standard reason list.

    • For denied requests:

      • To provide a reason for all denied requests, enter the reason in the Reason for approvals field.

      • To use a predefined standard reason for all denied requests, select the reason in the Standard reason list.

    • To provide an individual reason for an approval decision, click Enter a reason and enter your reason.

    TIP: By giving reasons, your approvals are more transparent and support the audit trail.

    NOTE: For more detailed information about standard reasons, see the One Identity Manager IT Shop Administration Guide.

  6. (Optional) To specify the validity period for a requested product, perform the following actions:

    1. In the list, in the Valid from column, click on a value.

    2. In the Valid from dialog, specify from when the product is valid.

    3. Click Close.

    4. In the list, in the Valid until column, click on a value.

    5. In the Valid until dialog, specify until when the product is valid.

  7. Click Save.

Related topics

Displaying and approving entire requests of pending requests

You can display all other products of a product request that are included in this request (meaning, they were sent in the same shopping cart). You can approve pending requests together.

To display an entire request and approve all the requests contained in it.

  1. In the menu bar, click Request > My Actions.

  2. On the My Actions page, click Pending Requests.

  3. On the Pending Requests page, mark the product in the list that has the request you want to see in its entirety.

  4. In the details pane, click More > Show entire request.

  5. On the Request overview page, click Approve all.

  6. On the Pending Requests - Approvals page, perform one of the following actions:

    • To provide a reason for all request approvals, enter the reason in the Reason for approvals field.

    • To use a predefined standard reason for all request approvals, select the reason in the Standard reason.

    • To provide an individual reason for an approval decision, click Enter a reason and enter your reason.

    TIP: By giving reasons, your approvals are more transparent and support the audit trail.

    NOTE: For more detailed information about standard reasons, see the One Identity Manager IT Shop Administration Guide.

  7. (Optional) To specify the validity period for a requested product, perform the following actions:

    1. In the list, in the Valid from column, click on a value.

    2. In the Valid from dialog, specify from when the product is valid.

    3. Click Close.

    4. In the list, in the Valid until column, click on a value.

    5. In the Valid until dialog, specify until when the product is valid.

  8. Click Save.

Related topics

Approving pending requests from newly created Active Directory groups

Identities can create Active Directory groups by requesting the New Active Directory security group or the New Active Directory distribution group product. As approver, you can make approval decisions about requests like this. If you approve the request, you must provide additional information about the group.

To approve a request to create a new Active Directory group

  1. In the menu bar, click Request > My Actions.

  2. On the My Actions page, click Pending Requests.

  3. On the Pending Requests page, click the request for the new Active Directory group in the list.

  4. In the details pane, click Configure the new group.

  5. In the dialog, enter additional information about the new group:

    • Name: Enter a name for the group.

    • Group scope: Select the scope that specifies the range of the group's usage within the domain or forest. The group's scope specifies where the group is allowed to issue permissions. You can select one of the following group scopes:

      • Global group: Global groups can be used to provide cross-domain authorizations. Members of a global group are only user accounts, computers, and groups belonging to the global group’s domain.

      • Local: Local groups are used when authorizations are issued within the same domain. Members of a domain local group can be user accounts, computers, or groups in any domain.

      • Universal: Universal groups can be used to provide cross-domain authorizations available. Universal group members can be user accounts and groups from all domains in one domain structure.

    • Container: Click Assign/Change and select a container for the group.

  6. Click OK.

  7. Next to the request, click (Approve).

  8. Click Next.

  9. On the Pending Requests - Approvals page, perform one of the following actions:

    • To provide a reason for all request approvals, enter the reason in the Reason for approvals field.

    • To use a predefined standard reason for all request approvals, select the reason in the Standard reason.

    • To provide an individual reason for an approval decision, click Enter a reason and enter your reason.

    TIP: By giving reasons, your approvals are more transparent and support the audit trail.

    NOTE: For more detailed information about standard reasons, see the One Identity Manager IT Shop Administration Guide.

  10. (Optional) To specify the validity period for a requested product, perform the following actions:

    1. In the list, in the Valid from column, click on a value.

    2. In the Valid from dialog, specify from when the product is valid.

    3. Click Close.

    4. In the list, in the Valid until column, click on a value.

    5. In the Valid until dialog, specify until when the product is valid.

  11. Click Save.

Related topics
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级