立即与支持人员聊天
与支持团队交流

DR Series Software 4.0 - Administrator Guide

Introducing the DR Series system documentation Introducing the DR Series system Setting up the DR Series system Configuring the DR Series system settings Managing containers Managing replications Monitoring the DR Series system Using GlobalView Configuring and using Rapid NFS and Rapid CIFS Configuring and using Rapid Data Access with NetVault Backup and with vRanger Configuring and using RDA with OST
Understanding RDA with OST Guidelines Terminology Supported RDA with OST software and components Best Practices: RDA with OST and the DR Series System Setting client-side optimization Configuring an LSU Installing the RDA with OST plug-in Configuring DR Series system information using NetBackup Backing Up Data From a DR Series System (NetBackup) Using Backup Exec with a DR Series system (Windows) Understanding the OST CLI commands Understanding RDA with OST Plug-In Diagnostic Logs Collecting Diagnostics Using a Linux Utility Guidelines for Gathering Media Server Information
Configuring and using VTL Configuring and Using Encryption at Rest Support, maintenance, and troubleshooting Supported Ports in a DR Series System
•
System-related information that assists in understanding system operations
•
A record of system operations in case Technical Support needs to provide technical assistance

Diagnostics runs as a service during system startup, and this process listens for incoming requests. There are two modes in which the diagnostics collection process is started:

•
Admin-Generated mode: when a DR Series system CLI or DR Series system GUI request is made by the administrator (and the default reason that is listed is admin-generated).
•
Auto-Generated mode: when a process or service failure is reported, the DR Series system starts collecting system-related information. After it completes the auto-generated collection, it generates a system event.

When the diagnostics log directory exceeds the maximum storage capacity, any log older than one hour is automatically deleted. The DR Series system GUI lets you download and save diagnostics log files to other systems on your network. The DR Series system also maintains a separate archive logs directory that collects other system-related information, and these archive logs are also automatically deleted when they exceed a maximum capacity. When you generate a diagnostics log file bundle, it contains all of the DR Series system information that you need when contacting Technical Support for technical assistance. The diagnostics log file bundle collects the same type of hardware, storage, and operating system information that is collected when using the Dell System E-Support Tool (DSET) and the DR Series system CLI commands (diagnostics --collect --dset). When a diagnostics log file bundle is generated, this process also collects all the previous auto-generated diagnostics and deletes them from the system.

The Diagnostics service collection process observes the following guidelines:

•
DR Series system triggers an automatic diagnostic log collection of the DR Series system status for any system process or service failures.
•
All automatic diagnostic collection requests are queued and executed sequentially.

The DR Series system GUI provides options to display existing diagnostics logs, generate new diagnostics logs, download and save copies of existing diagnostics logs, or delete existing diagnostics logs. The DR Series system CLI also provides the means for managing, generating, or downloading the diagnostics log files. For more information, see the DR Series System Command Line Reference Guide.

Parent topic 

Generating a diagnostics log file

Generating a diagnostics log file

A DR Series diagnostics log file is a bundle that contains a variety of file types that record the latest system settings, and saves them in a compressed .lzip file format. When you generate a diagnostics log file bundle, it contains all of the DR Series system information that may be needed when contacting Technical Support for technical assistance. This also includes all the previous auto-generated diagnostics log files, which are then deleted from the DR Series system. The diagnostics log file bundle collects the same type of hardware, storage, and operating system information collected by the Dell System E-Support Tool (DSET) from the DR Series system appliance hardware:
To collect a DSET log file, use the DR Series system CLI command, diagnostics --collect --dset.
•
To collect the comprehensive DR Series system diagnostics log file bundle (which also includes DSET information), use the DR Series system CLI command, diagnostics --collect.

To generate a diagnostics log file bundle for your system, complete the following steps:

1.
In the left navigation menu, click Support > Diagnostics.
The Diagnostics page is displayed, and this page lists all current diagnostics log files.
2.
In the Action menu in the upper right corner of the page, click Generate.
The Generate Diagnostics pane is displayed.
3.
In the Select Diagnostics Type drop-down list, select one of the following options.
◦
basic
◦
dset
◦
logs
◦
cores
◦
tcpdump
◦
all
4.
To verify that a new diagnostics log file is being generated, check the status of the diagnostics log file on the Diagnostics page.
A status showing In-progress indicates that a new diagnostics log file is being generated.

Once completed, the new diagnostics log file resides at the top of the File Name column in the table. To verify, check its timestamp (using its date and time), to ensure this is the latest diagnostics file created.

Parent topic 

Downloading diagnostics log files

Downloading diagnostics log files

To download an existing diagnostics log file, complete the following steps:

In the left navigation menu, click Support > Diagnostics.
The Diagnostics page is displayed, which lists all current diagnostics log files for the system.
2.
In the list, select the diagnostics log file you want to download, and click the Download icon.
The File Download dialog is displayed.
3.
Download and save the file as needed.
Parent topic 

Deleting a Diagnostics Log File

Deleting a Diagnostics Log File

To delete an existing diagnostics log file from the Diagnostics summary table on the Diagnostics page, complete the following:

Select Support > Diagnostics.
The Diagnostics page is displayed.
2.
Click Select to select the diagnostics file you want to delete, and click Delete.
The Delete Confirmation dialog is displayed.
3.
Click OK to delete the selected diagnostics log file (or click Cancel to display the Diagnostics page).
The Log file was removed successfully dialog is displayed when successful.
Parent topic 
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级