立即与支持人员聊天
与支持团队交流

DR Series Software 3.2.0.2 - Administrator Guide

Introduction to the DR Series System Documentation Understanding the DR Series System Setting Up the DR Series System Hardware Configuring the DR Series System Settings Managing DR Series Storage Operations Monitoring the DR Series System Using Global View Using the DR Series System Support Options Configuring and Using Rapid NFS and Rapid CIFS Configuring and Using Rapid Data Access with Dell NetVault Backup and with Dell vRanger Configuring and Using RDA with OST
Understanding RDA with OST Guidelines Terminology Supported RDA with OST Software and Components Best Practices: RDA with OST and the DR Series System Setting Client-Side Optimization Configuring an LSU Installing the RDA with OST Plug-In Configuring DR Series System Information Using NetBackup Backing Up Data From a DR Series System (NetBackup) Using Backup Exec With a DR Series System (Windows) Understanding the OST CLI Commands Understanding RDA with OST Plug-In Diagnostic Logs Collecting Diagnostics Using a Linux Utility Guidelines for Gathering Media Server Information
Configuring and Using VTL Configuring and Using Encryption at Rest Troubleshooting and Maintenance Supported Ports in a DR Series System Getting Help
2.
On the Global View page, in the appliance list, click the Deletecheckbox next to the system you want to delete. Note that there is no checkbox next to the system that contains the Global View; it is not available to be removed.
3.
At the top of the page, click Delete.
A confirmation prompt is displayed.
4.
Click OK to confirm the deletion.
The system is deleted from the Global View dashboard.
Parent topic 

Reconnecting DR Series Systems

Reconnecting DR Series Systems

If a system administrator removes a member DR Series system from the ADS domain or if authentication to a member DR Series system fails (such as when the system is down), then the Global View dashboard displays a red icon in the Status column next to the appliance. If one or more red icons are displayed, the Reconnect Units link is enabled on the Global View page. To reconnect a DR Series system to the Global View, complete the following:

1.
On the Global View page, click Reconnect Units.
The Reconnect DR Units dialog box appears.
2.
In Domain Name (FQDN), enter the fully-qualified domain name (FQDN) in which the DR Series system resides. Keep in mind that the system must be in the same login group and have identical credentials to the system on which you are working.
3.
In Username, enter the domain username for the DR Series system. For example, DOMAIN\administrator. This should be identical to the credentials used in all other systems in the Global View.
4.
In Password, enter the domain password for the DR Series system. This should be identical to the credentials used in all other systems in the Global View.
5.
Click Reconnect.
The DR Series system attempts to reconnect only those DR Series systems that are currently disconnected.

The Reconnect DR Units Report is displayed, indicating whether the reconnection was successful or unsuccessful. If the reconnect action is successful, the Status of the connected DR Series system displays a green icon. However, if there are unresolved underlying issues such as issues with the network connection, issues with a WAN connection, or issues with the DR Series system that prevent a good connection, then the Reconnect DR Units Report indicates failure.

 
 
Parent topic 

Using the Reconnect Report

Using the Reconnect Report

The Reconnect DR Units Report provides information about your most recent attempt to reconnect DR Series systems. The link to access the Reconnect DR Units Report is only enabled after you attempt to reconnect DR Series systems. To view the Reconnect DR Units Report, complete the following:

On the Global View page, click Reconnect Report.
The Reconnect DR Units Report is displayed. If all DR Series systems were successfully reconnected the last time you clicked Reconnect Units, then the report indicates that all DR Series systems were successfully connected. However, if the reconnect failed, then the Reconnect DR Units Report displays the FQDNs of the disconnected DR Series systems with a message indicating the issue. For example, the message No route to host indicates that the system was unable to ping the DR Series system from the current location because either the system is down, or the router is unable to route traffic to the system.
2.
After you review the Reconnect DR Units Report, click Close to return to the Global View page.
Parent topic 

Using the DR Series System Support Options

Using the DR Series System Support Options

Diagnostics Page and Options
DR Series System Software Upgrade
Software Upgrade Page and Options
SSL Page and Options
Restore Manager (RM)
Hardware Removal or Replacement

You can use the Support page and its Diagnostics, Software Upgrade, and License options to maintain the state of your DR Series system. To access these options, use the DR Series system navigation panel (for example, click Support→ Diagnostics to display the Diagnostics page) or use the Diagnostics, Software Upgrade, or License links on the Support page.

 
 
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级