This topic contains important information for users who are upgrading from a previous QoreStor release.

Existing QoreStor installations can not be upgraded to use Object Direct storage. To use QoreStor in Object Direct mode, you must perform a fresh installation.
During the upgrade, the QoreStor installation script will verify that the Repository and Metadata filesystems are mounted with the noatime and dirsync mount options. If not, the installation script will prompt the user to allow the script to make the necessary changes in /etc/fstab and prompt you to reboot the system and re-run the QoreStor installation process.

NOTE: The above process does not occur when installing QoreStor in Demo mode.

To ensure proper authentication of network shares, after upgrading to QoreStor 7.0.1, remove the QoreStor server from the domain and re-add it to the domain.

QoreStor 7.0.1 contains support for VTL protocols. To enable VTL support, you must perform the following sequence of operations:

Upgrade your existing installation to QoreStor 7.0.1. Do not select the option to install VTL support at this point.

Using the steps documented in "Uninstalling QoreStor while maintaining configuration data" in the QoreStor Installation Guide, uninstall the newly updated QoreStor installation.

IMPORTANT: Uninstalling your existing QoreStor with the command below will preserve your data and application configurations.

/opt/qorestor/bin/qs_uninst

When running this command, you will receive the prompt:

To completely remove the application, user data, and configuration files, answer 'no' below,

and rerun the uninstaller with the '-a' option.

Do you wish to continue? yes\no [no]:

Enter Yes to continue without removing your data.

Reinstall QoreStor 7.0.1 with VTL support by either using the --install-vtl option or answering “yes” to the prompt for adding VTL support.

When using QoreStor with VTL, upgrades to the operating system of the QoreStor server require additional configuration. Refer to "Upgrading the QoreStor Operating System" in the QoreStor Installation Guide.

Upgrading QoreStor instances on Microsoft Azure

For QoreStor instances running on Microsoft Azure, perform the actions below before upgrading to 7.0.1.

At the prompt, run the following commands:

curl -o azureclient.rpm https://rhui-1.microsoft.com/pulp/repos/microsoft-azure-rhel7/rhui-azure-rhel7-2.2-74.noarch.rpm

sudo rpm -U azureclient.rpm

sudo yum clean all

Upgrading a migrated DR Series appliance to QoreStor 7.0.1.238

If you have previously migrated your DR Series system to QoreStor, you must upgrade your QoreStor software to build 6.1.0.814 before upgrading to this build (7.0.1.238). The upgrade process in build 6.1.0.814 includes a step that flushes WAM data, and that process must be completed before upgrading to 7.0.1.238.

Upgrading to Rapid CIFS Plug-in 4.0.3.3 with Secure Connect

Secure Connect is comprised of a set of client and server components that create a resilient and secure communication channel for use by WAN-connected clients. The server components are installed and enabled by default during the installation of the QoreStor server. Starting with the Rapid CIFS plug-in version 4.0.3.3, the plug-in installer includes the option to install and enable Secure Connect.

IMPORTANT: Refer to the Known Issues section of this document for Rapid CIFS issues known to be present at the time of release.

If you have WAN-connected Rapid CIFS clients and choose to install Secure Connect, you can do so by following the steps below:

On the media server, map a network share to your CIFS-enabled container.
Download the plug-in installer from the website, as detailed previously.
Open a command prompt with the “Run as Administrator” option selected. To do this using the Windows Start menu, click Start → All Programs → Accessories. Right-click Command Prompt and selectRun as Administrator.
This gives all the required privileges to install/copy the driver files to the Windows drivers folder.
Run QuestRapidCIFS-4.0.3318.0.exe.
When prompted, select Install a Secure Connection to install Secure Connect.
Secure Connect ensures backups to QoreStor are completed in spite of slow or unreliable WAN connections. When selecting this option, you will be prompted for additional configuration information required to make Secure Connect function correctly.

At the Configure Secure Connect page, complete the dialog using the IP or fully qualified domain name (FQDN) of the QoreStor server and appropriate credentials.

The user account used must have the CIFS role assigned.

NOTE: The Configure Secure Connect operation is not supported for CIFS containers on DR Series appliances. DR Series appliances do not contain the required Secure Connect server component . This operation is available only for QoreStor instances. For CIFS containers on DR Series appliances, connect using the Rapid CIFS plug-in and the DR Series host name.

NOTE: The value entered in the Display Name field must not match the hostname of the QoreStor server.

Upgrading to Rapid NFS Plug-in 4.0.3.3

Secure Connect is comprised of a set of client and server components that create a resilient and secure communication channel for use by WAN-connected clients. The server components are installed and enabled by default during the installation of the QoreStor server. Starting with the Rapid NFS plug-in version 4.0.3.3, the plug-in installation script includes the option to install and enable Secure Connect.

IMPORTANT: Refer to the Known Issues section of this document for Rapid NFS issues known to be present at the time of release.

If you have WAN-connected Rapid NFS clients and choose to install Secure Connect, you can do so by following the steps below:

Download QuestRapidNFS-4.0.3317.0-x86_64.bin.gz from the website.

Unzip the package.

unzip QuestRapidNFS-4.0.3317.0-x86_64.bin.gz

Change the permission of the binary package to allow it to run:
```
chmod +x QuestRapidNFS-4.0.3317.0-x86_64.bin
```
Install the Rapid NFS package. Before installing, remove the stale NFS entry.
```
QuestRapidNFS-4.0.3317.0-x86_64.bin -install
```
Load the file system in user space (FUSE) module, if not already loaded:
```
modprobe fuse 
```
Create a directory on the client. For example:
```
mkdir /mnt/backup
```

Mount Rapid NFS as a file system type using the mount command. For example:

 mount -t rdnfs 10.0.0.1:/containers/backup/mnt/backup

To enable Secure Connect, mount Rapid NFS using the sc flag, as shown below:

mount -t rdnfs 10.0.0.1:/containers/backup/mnt/backup sc,user=backup_user,password=<backup_user password>

If you are using a DMA that supports a marker, set the marker by using -o in the mount command. For example, if you wanted to set the CommVault marker (cv):

mount -t rdnfs 10.0.0.1:/containers/backup /mnt/backup -o marker=cv

NOTE: If you want to do a mount on AIX, you must set the nfs_use_reserved_ports and portcheck parameters first. The parameters cannot be set to 0. For example: root@aixhost1 / # nfso -po portcheck=1 root@aixhost1 / # nfso -po nfs_use_reserved_ports=1

Resolved issues

Open issues

Issue ID	Resolved Issue
QS-6662	Replication add for AIR should fail if replication_traffic and encryption options used in the --add CLI. Both replication_traffic and encryption options are irrelevant to AIR and user should not be allowed to use them while adding AIR replication. Above parameters are restricted in --update CLI so similarly should be blocked in add CLI.
QS-7711	Corrected API documentation for get-installers and upload-binary commands.
QS-8470	Added support for SMB write-through in Rapid CIFS.
QS-8728	Cleaner caused the following maintenance mode error: Failed stat blockmap file.
QS-9122	For very small files (128 bytes or smaller) in an archive tier, the data is stored in AWS S3 itself. These files do not need to be restored from the Glacier archive. S3 HEAD operation returns ContentLength for a given object. If it is 128 or less, no restore operation is required.
QS-10008	The qs-smb service failed to start when the administrator account was not present.
QS-10119	Performance degradation occurred after converting to DR QoreStor.
QS-10195	Corrected an issue where failed NVRAM on QoreStor caused data loss.
QS-10349, QS-10350, QS-10719	Resolved multiple DR-to-QoreStor replication issues.
QS-10354	Disabled SElinux on migrated DRs and made associated changes in the QoreStor 7.0.1 Installation Guide.
QS-10530	Could not replicate between 7.0.0 and 7.0.1.
QS-10617	After enabling cloud replication, ocafsd coring occurred in the command line.
QS-10791, QS-10844, QS-10897	Resolved minor replication issues.

Known issues

The issues below are known to exist in this release.

Table 2: Known issues in this release
ID	Issue
QS-437 QS-438	When using multiple NetVault Backup Servers to access the same QoreStor Server, use storage group, container, and user names unique to each NetVault Backup server to avoid accidental deletions.
QS-627 12345678	After deleting a container and storage group, immediately creating a new container with the same name may fail. Workaround: This failure occurs because the old container is still in a delete_pending stage. To proceed with creating a new container, wait until the old container has been completely deleted via the QoreStor Cleaner run.
QS-1420	When executing the QoreStor uninstallation script, the script will report and continue if illegal options are entered.
QS-1446	If the QoreStor partition is not set to automount, and the QoreStor server is rebooted, the system appears to be operational but shows 0 physical capacity.
QS-1588	When running Optimized Duplication jobs in Backup Exec, the container quota is not enforced as it is for backup jobs.
QS-1666	When NetVault is installed on a Linux server, the RDA Client version is not displayed correctly. Workaround: To view the build number of the plugin, run the command strings /usr/netvault/dynlib/librofsoca.so \| grep "(EAR-4.1.0) Build:"
QS-1670	For Linux clients, the full version number of RDA plug-ins is not displayed.
QS-1823	In some situations, the deduplication savings for a storage group shows as 100% before a backup has occurred. Once a backup has occurred, the deduplication savings will be displayed accurately.
QS-1980	When deleting a storage group, the Storage Group page will display timestamp data where the storage group entry used to appear. This occurs because the storage group is still in a delete_pending stage. Once the delete is completed and the UI refreshes, the timestamp will not longer appear.
QS-2236	When installing QoreStor, if a required port is unavailable the installation will continue and be considered successful, yet QoreStor will start in Maintenance Mode. Workaround: Ensure that all required ports are available to QoreStor.
QS-2242	When installing QoreStor, the filesystem selected for the QoreStor repository should not contain data from other application or users. QoreStor must have exclusive access to the repository filesystem.
QS-2604	If unregistered clients access QoreStor CIFS shares by mounting the share, the /var/log/messages will contain numerous host name/mismatch errors. Workaround: Unregistered clients need to be updated in DNS server manually.
QS-2694	When the system time on the QoreStor server is synchronized with the domain time, this may cause the system time to adjust backwards. If this occurs, system statistics (like read/write throughput statistics) will appear to be hung for an amount of time equal to the time adjustment.
QS-3779	When using Secure Connect with NetVault Backup in a multiple-machine configuration (NetVault server, NetVault client, QoreStor server), Secure Connect can respond to errors only for connections between the NetVault server and QoreStor or the NetVault client and QoreStor. Secure Connect does not address connections between the NetVault server and NetVault client.
QS-4169	When using the Linux exports http_proxy or https_proxy, no_proxy is also required for the watcher service to function correctly. Refer to "Accessing QoreStor" in the QoreStor User Guide.
QS-5072	When authenticated to a domain, connecting to CIFS shares with a localhost account is not successful.
QS-5105	Changes to a Cloud Tier Policy for inclusions or exclusions will not take effect until the QoreStor service has been restarted.
QS-5438	After performing a DR to QoreStor migration, network settings are reset to default.
QS-5627	The current error output of "rda --limit" without any argument incorrect suggests limits are enforced via Mbps (megabits per second) when the limit is actually in MBps (megabytes per second).
QS-5629	When configuring a custom graph, if you select a period for which there is no data, the graph will be blank and display "No Data Available"
QS-5826	When performing a DR to QoreStor migration, bonding modes and MTU settings are not
QS-5891	Rapid CIFS is not supported on Windows Server 2016 with secure boot enabled.
QS-6291	When using the latest version of the Rapid CIFS plug-in with Veeam Backup and Recovery, the configurations below are required: For the Backup Repository, change the Gateway Server option to The following server and enter the IP or hostname of the local machine. For VMware Backup, the Gateway server should be changed from the Automatic selection to the Use the selected backup proxy servers only.
QS-6653	OST MSI plugin reports a new version is already installed when installing an updated driver Workaround: Uninstall the OST driver before installing the newer driver
QS-6782	When installing Rapid CIFS on Windows 2008 R2, the installation deploys driver version 4.0.3207.1 , causing the version displayed by rcifsctl.exe driver -q to be different from the version in the Windows Programs and Features dialog. The functionality of Secure Connect is not changed.
QS-6808	When configuring Backup Exec with CIFS shares using the display name, the steps below must be followed: In the command prompt, change directpries to the path C:\Program Files\Quest\Rapid CIFS. Run rdcifsctl.exe sc -d for disable a secure connection. Configure storage in Backup Exec by specifying \\displayname\container as network share. During this configuration all connections from Backup Exec to QoreStor are secured. Run rdcifsctl.exe sc -e to enable a secure connection.
QS-6860	During upgrade, the SMB config file is overwritten. Any manual changes to this file will be lost on upgrade.
QS-7029	When using Rapid NFS with Secure Connect, the NFS container must have insecure option set. This must be done via the command line. Refer to Upgrade notesfor more information.
QS-8945	When QoreStor is installed on Linux versions 7.3 - 7.7, configuring an archive tier may result in a memory leak. This is due to an issue with the curl package installed on those versions of Linux. Workaround Either upgrade the Linux version on the QoreStor server to 7.8, or update the curl package to curl 7.29.0-57.el7. DR Series systems migrated to QoreStor which are on Oracle Linux 7.3 should update the curl package to 7.29.0-57.el7
QS-9056	On DR Series Systems migrated to QoreStor, the maximum inode limit for an object container is set to 1 million. In some cases, this may result in a "maximum allowable File(s) and Directories limit" error. Workaround: To increase that, the environmental variable MDS_OT_INODES_ALLOWED in /etc/oca/customer.env has to be set to a higher value. Please contact Quest Support for assistance making this change.
QS-9021	During object direct installation, if the message "Failed to validate object direct connection string! "may be received if the certificate has been changed or is expired on the QoreStor server. Workaround Purge the certificate with the command below cloud_tier --purge-ssl-certificate
QS-9177	When configuring the Rapid NFS client with Secure Connect, You may mount the plug-in with either the IP address or the fully qualified domain name (FQDN). If you use the FQDN, you must also add an entry in the /etct/hosts file on the QoreStor system and verify that the hostname is resolvable.
QS-10018	When writing to an NFS container on a system with 24GB or less of memory, some customers may receive "out of memory" errors. Workaround: On the QoreStor system, run the command sysctl -a \| grep tcp_mem. This will return your tcp memory consumption, like the example value below. The return indicates your minimum, average, and maximum values. net.ipv4.tcp_mem = 285198 380264 570396 Using the command below, set the tcp_mem maximum value to the average value (380264, in the example above). Note that your values will be different. The value in the center is the average. sysctl -w "net.ipv4.tcp_mem=285198 380264 380264"
QS-10042	When attempting to delete a bucket containing a large amount of data, QoreStor will appear to freeze. This is due to an AWS S3 limitation that requires the objects within a bucket to be deleted before the bucket can be deleted. During the bucket delete operation, the objects are enumerated and deleted one at a time. Workaround: Before deleting the bucket, delete the objects within the bucket using the AWS S3 console.
QS-10772	Replication update fails with replication between QoreStor 7.0.1 and QoreStor 7.0 or the DR appliance. Workaround: For DR-to-QoreStor replication, update replication by way of the QoreStor user interface or command line interface.

Product Licensing

QoreStor offers a backend capacity licensing model to allow for simple integration with other Quest Data Protection products.

Standalone license - QoreStor is licensed by the amount of backend capacity required. Standalone licenses are available as either perpetual licenses (with no expiration), or term licenses, which expire after a specified period of time.
NOTE: Term licenses are intended for specific customer use cases, i.e., licensing according to yearly billing cycles. A perpetual license is appropriate for most customers.

QoreStor licenses are additive, meaning that if you purchase a 5TB license now, and a 10TB license in the future, you will have 15TB total capacity.

NOTE: Licenses for QoreStor are specific to the QoreStor server. When installing a license, the System ID for your QoreStor server is required. You can obtain the System ID with the command system --show | grep "System ID"

Evaluating QoreStor

QoreStor offers two methods for evaluation:

Default installation - If no license is installed, QoreStor defaults to a no-cost, 1TB capacity installation supported by the QoreStor Community. This option requires no license and does not expire.
- If a license is applied to a server running in this mode, the free 1TB is not added to the purchased license capacity.
- When installed in Demo mode, the capacity is limited to 100GB.
Full capacity trial - available on the Quest Software Trial site, which provides a 30-day evaluation license for up to 360TB and access to Quest Support. After the evaluation period has expired, the QoreStor server will operate in Manual Intervention mode until a license is applied. To use QoreStor beyond that time frame, you will need to purchase a perpetual standalone license.
- If installed in Demo mode, the capacity is limited to 100GB
- If a longer trial period is required, please contact Quest Sales.

If you have purchased a standalone license, you can install it using the system --license command, as described in the QoreStor Command Line Reference Guide.

NOTE: When ordering a license, the System ID for your QoreStor server is required. You can obtain the System ID with the command system --show | grep "System ID"

Please select your product:

To serve you better, please complete the Purpose of your Chat:

Recommended Solutions for Your Problem

QoreStor 7.0.1 - Release Notes

Upgrade notes