Chat now with support
Chat with Support

DR Series DR6300 - Owner's Manual

DR6300 system overview Technical specifications Initial system setup and configuration Pre-operating system management applications
Options to manage the pre-operating system applications System Setup Dell Lifecycle Controller Boot Manager PXE boot
Installing and removing system components
Safety instructions Before working inside your system After working inside your system Recommended tools Front bezel (optional) System cover Cooling shroud Cooling fans Cooling-fan assembly System memory Processors and heat sinks PCIe card holder Cable retention bracket Integrated storage controller card Expansion cards and expansion card riser Internal dual SD module (optional) Network daughter card Internal USB memory key (optional) System battery Power supply units (PSU) System board Trusted Platform Module Hard drives Hard drive backplane SD vFlash card (optional) Control panel assembly
Using system diagnostics Jumpers and connectors Troubleshooting your system

System board jumpers and connectors

Figure 85. System board jumpers and connectors

This figure shows the system board connectors and jumpers.

Table 36. System board connectors and jumpers

Item

Connector

Description

1

J_BP_SIG1

Backplane signal connector 1

2

J_PS_2

PSU 2 connector

3

J_BP_SIG0

Backplane signal connector 0

4

J_BP0

Backplane power connector 0

5

J_SATA_CD

Optical drive SATA connector

6

J_SATA_TBU

Tape backup unit SATA connector

7

J_TBU

Tape backup unit power connector

8

J_PS_1

PSU 1 connector

9

J_IDSDM

Internal dual SD module connector

10

J_NDC

Network daughter card connector

11

J_USB

USB port

12

J_VIDEO_REAR

Video connector

13

J_COM1

Serial connector

14

J_IDRAC_RJ45

iDRAC8 connector

15

J_CYC

System identification connector

16

CYC_ID

System identification button

17

J_TPM_MODULE

Trusted Platform Module connector

18

J_RISER_2AX

Riser 3 connector

19

J_RISER_1AX

Riser 1 connector

20

J_RISER_2BX

Riser 2 connector

21

J_RISER_1BX

Riser 1 connector

22

J_RISER_3AX

Riser 3 connector

23

J_QS

Quick Sync bezel connector

24

J_RISER_3BX

Riser 3 connector

25

J_SATA_B

Internal SAS connector

26

J_STORAGE

Mini PERC connector

27

J_USB_INT

Internal USB port

28

J_SATA_A

Internal SAS connector

29

BAT

Battery connector

30

CPU 2

Processor 2 socket

31

J_BP3

Backplane power connector 3

32

B10, B6, B2, B9, B5, B1

Memory module sockets

33

J_BP_SIG2

Backplane signal connector 2

34

J_FAN2U_6

Cooling fan connector

35

J_FAN2U_5

Cooling fan connector

36

J_BP2

Backplane power connector 2

37

B3, B7, B11, B4, B8, B12

Memory module sockets

38

J_FAN2U_4

Cooling fan connector

39

A10, A6, A2, A9, A5, A1

Memory module sockets

40

J_FAN2U_3

Cooling fan connector

41

J_BP1

Backplane power connector

42

J_FAN2U_2

Cooling fan connector

43

A3, A7, A11, A4, A8, A12

Memory module sockets

44

J_FAN2U_1

Cooling fan connector

45

J_CTRL_PNL

Control panel signal connector

46

CPU 1

Processor 1 socket

47

J_FP_USB

Front panel USB port

Disabling a forgotten password

The software security features of the system include a system password and a setup password. The password jumper enables these password features or disables them and clears any password(s) currently in use.

The existing passwords are not disabled (erased) until the system boots with the jumper on pins 2 and 4. However, before you assign a new system and/or setup password, you must move the jumper back to pins 4 and 6.

Troubleshooting your system

Troubleshooting your system

Safety first — for you and your system

Troubleshooting system startup failure

If you boot the system to the BIOS boot mode after installing an operating system from the UEFI Boot Manager, the system stops responding. To avoid this issue, you must boot to the same boot mode in which you installed the operating system.

For all other startup issues, note the system messages that appear on the screen.

Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating