Description
Limits the bandwidth used during replication by defining a bandwidth limit using any of the following settings:
- Kilobytes/second (KBps)
- Megabytes/second (MBps)
- Gigabytes/second (GBps)
- Unlimited bandwidth (this is the default setting); minimum allowed bandwidth setting is 192 KBps
|
|
IMPORTANT: Bandwidth rules for all ports will be deleted. New rules will be applied by QoreStor with this command. |
Syntax
replication --limit --speed <<num><KBps|MBps|GBps> | default> --target <ip address | hostname> [--air]
Where
--speed Replication speed limit (eg. 10MBps).
--target Replication peer IP address.
--air Auto Image replication enabled.
Result
Successfully updated replication limit for acme-60 to 10 GBps.
Changing traffic control policies ... done.
Description
Resynchronizes the replication process between a source and target container in a replication relationship on a QoreStor.
|
|
IMPORTANT: This command should only be used in an emergency situation with the help of Quest Support. Do not mistake this command as an ability to start a replication sync outside of the schedule window.
If your intention is to start a replication outside of the window, you can either delete the schedule, or add a temporary replication window to the current schedule and delete it when the systems are in sync. |
Syntax
replication --resync --name <name> --role <source | target>
Where
--name Name of container.
--role Role of container.
Result
Successfully initiated replication resync on container dataStorage3.
Description
Troubleshoots the replication connections between a source and target container on a QoreStor.
|
|
NOTE: This command only reports 9915 and 9916 as succeeding against a replication peer that has Qorestor or DR Series replication configured to another system. If the peer is not currently using any replication ports, 9915 and 9916 will report as connection refused. |
Syntax
replication --troubleshoot --peer <ip address | hostname>
Where
--peer IP address or name of remote machine to troubleshoot.
Result
The following examples shows both successful and unsuccessful replication connection attempts:
Testing connection to port 9904... Connected!
Testing connection to port 9911... Connected!
Testing connection to port 9915... Connected!
Testing connection to port 9916... Connected!
Replication troubleshooting completed successfully - Connection to all ports is OK!
replication --troubleshoot --peer acme-205
Testing connection to port 9904... Connected!
Testing connection to port 9911... Connected!
Testing connection to port 9915...
Unable to connect to socket - Connection refused
Could not connect to acme-205 on port 9915 - (Connection refused)
Testing connection to port 9916...
Unable to connect to socket - Connection refused
Could not connect to acme-205 on port 9916 - (Connection refused)
Description
Displays the list of all replication-related options that can be used as a reference when using the QoreStor CLI.
Result
Usage:
replication --show [-air] [--name <name>]
[--role <source | target>]
[--verbose]
[--limits]
replication --add --name <name>
--role <source | target>
--peer <ip address | hostname>
[--peer_name <name>]
[--peer_group_name <name>]
[--replication_traffic <ip address | hostname>]
[--encryption <none | aes128 | aes256>]
[--username <user name>]
[-air]
replication --update --name <name>
--role <source | target>
[--peer <ip address | hostname>]
[--replication_traffic <ip address | hostname>]
[--encryption <none | aes128 | aes256>]
[--username <user name>]
replication --delete --name <name>
--role <source | target>
[--force]
replication --start --name <name>
--role <source | target>
replication --stop --name <name>
--role <source | target>
replication --limit --speed <<num><KBps|MBps|GBps> | default>
--target <ip address | hostname>
[-air]
replication --resync --name <name>
--role <source | target>
replication --troubleshoot --peer <ip address | hostname>
replication --help
replication <command> <command-arguments>
<command> can be one of:
--show Displays command specific information.
--add Adds a replication link to a container.
--update Updates a replication link to a container.
--delete Deletes a replication link from a container.
--start Starts replication.
--stop Stops replication.
--limit Delete existing bandwidth rules for all ports and set new throttling limits.
--resync Initiates a replication re-sync.
--troubleshoot Troubleshoots replication connection.
For command-specific help, please type replication --help <command>
eg:
replication --help show
