The following is a list of issues, including those attributed to third-party products, known to exist at the time of release.
Table 18: Version compatibility known issues
| Known Issue | Issue ID |
|---|---|
| Database backups created with LiteSpeed Version 8.x cannot be restored using older versions of LiteSpeed. However, backups created with previous versions of LiteSpeed can be restored with LiteSpeed 8.2. | N/A |
Table 19: Console known issues
| Known Issue | Issue ID |
|---|---|
|
On Windows 8.1, console logging cannot be enabled when UAC is enabled. The workaround is to run LiteSpeed with the “Run as Administrator” option to enable console logging. |
113540 |
Table 20: Backup and restore known issues
| Known Issue | Issue ID |
|---|---|
| Mirroring is not supported for TSM backups. | 49305 |
| LiteSpeed incorrectly writes successful backup details to the SQL Server error log or event viewer if DBCC TRACEON (3226) is run with the backup. These details are not written for a native backup. | 38972 |
|
On using LiteSpeed Automated Restore to restore an old backup to the source database, automated restore chooses older backups with a higher LSN number in preference to newer backups created after the restore. Workaround: Remove all the backups from old the database (created before the restore) from the backup folders scanned by Automated Restore. |
LS-514 |
Table 21: Activity logging known issues
| Known Issue | Issue ID |
|---|---|
|
NT AUTHORITY\SYSTEM account must be added to the sysadmin server role on the local instances of SQL Server 2012 or higher in this very rare scenario:
Otherwise, the local instance will not report to the central repository. Workaround: Instead of adding NT AUTHORITY\SYSTEM account to the sysadmin server role, you can either provide a Windows domain account on the Service Account wizard page or use SQL Server Authentication for the local and central repositories. |
104669 |
Table 22: Backup Analyzer known issues
| Known Issue | Issue ID |
|---|---|
|
The LiteSpeed Backup Analyzer backs up the requested amount of data for analysis and then automatically aborts the backup process. This generates VDI error messages in the LiteSpeed SQL Server error log. Please ignore them. |
79697 |
Table 23: Log shipping known issues
| Known Issue | Issue ID |
|---|---|
| The publisher and subscriber servers must have the same version of LiteSpeed. | 52230 |
| In the native SQL Server 2000 log shipping plans, if the monitoring server is not the same as the subscriber server, information about the restore time is based on the restore job history and may be different from the actual restore time. | 98644 |
|
On uninstall of LiteSpeed 8.1 followed by install of a modern LiteSpeed, logshipping jobs do not point to the new executable path. Workaround: At the logshipping module, select the plan and right-click on its name. Click convert to LiteSpeed plan. |
LS-1286 |
Table 24: Maintenance plans known issues
| Known Issue | Issue ID |
|---|---|
| Legacy native plans on SQL Server 2008 may fail due to Microsoft backward compatibility issue. See http://support.microsoft.com/kb/955626. | 60281 |
|
LiteSpeed does not support regular expressions with the IgnoreCase option. To ignore case, use ([Aa][Bb][Cc]) instead of (?i:abc. |
94513 |
Table 25: Log Reader known issues
| Known Issue | Issue ID |
|---|---|
| User information displays only for operations in sessions that are currently active. The online log and backups do not contain user information and only contain the SPID for the transaction. | 37112 |
| Log Reader does not support row-level and page-level compression. | N/A |
Table 26: Object Level Recovery known issues
| Known Issue | Issue ID |
|---|---|
| Restore of a table with default values after adding a NOT NULL column to the existing table will result in an error in the case of using Direct Mode (the issue is related to SQL Server 2012 and higher). Workaround: use Bulk Insert recovery mode. | 119733 |
| If there is data of variant type with size > 7991 in the table data, recovery using Bulk Insert will result in a BCP internal error: " The column is too long in the data file for...". Workaround: use Direct Mode for data recovery. | 119732 |
Before installing LiteSpeed 8.8, ensure that your system meets the following minimum hardware and software requirements.
Table 27: List of hardware requirements
| Requirements | Details |
|---|---|
| Processor | Follow the recommendations for the SQL Server version used. |
| Disk Space |
250 MB of disk space for installation NOTE: The disk space required may vary based on options selected during installation. |
| Memory |
Follow the recommendations for the SQL Server version used. NOTE: The memory required may vary based on the following:
|
| Monitor | SVGA with a minimum resolution of 1024x768 |
Table 28: List of software requirements
| Requirements | Details |
|---|---|
|
Operating |
Microsoft Windows Server 2008 32-bit and 64-bit (x64) (All Service Packs) Microsoft Windows Server 2008 R2 64-bit (x64) (All Service Packs) Microsoft Windows Server Core 2008 R2 Microsoft Windows Server 2012 64-bit (x64) (All Service Packs) Microsoft Windows Server Core 2012 Microsoft Windows Server 2012 R2 64-bit (x64) (All Service Packs) Microsoft Windows Server Core 2012 R2 Microsoft Windows Server 2016 64-bit (x64) (All Service Packs) Microsoft Windows Server Core 2016 Microsoft Windows Server 2019 64-bit (x64) (All Service Packs) Microsoft Windows XP 32-bit and 64-bit (x64) (All Service Packs) Microsoft Windows Vista 32-bit and 64-bit (x64) (All Service Packs) Microsoft Windows 7 32-bit and 64-bit (x64) (All Service Packs) Microsoft Windows 8 32-bit and 64-bit (x64) (All Service Packs) Microsoft Windows 8.1 32-bit and 64-bit (x64) (All Service Packs) Microsoft Windows 10 32-bit and 64-bit (x64) (All Service Packs) |
|
Database |
SQL Server 2005 32-bit and 64-bit (x64) (All Service Packs) SQL Server 2008 32-bit and 64-bit (x64) (All Service Packs) SQL Server 2008 R2 32-bit and 64-bit (x64) (All Service Packs) SQL Server 2012 32-bit and 64-bit (x64) (All Service Packs) SQL Server 2014 32-bit and 64-bit (x64) (All Service Packs) SQL Server 2016 64-bit (x64) (All Service Packs) SQL Server 2017 64-bit (x64) (All Service Packs) when hosted on a Windows operating system. |
| Additional Software |
.Net Framework 4.5 installed before you install the LiteSpeed UI Console and LiteSpeed Core Cloud Components. .Net Framework 3.5 required with SQL Server 2005, 2008 and 2008R2. If using IBM Spectrum Protect (Tivoli Storage Manager - TSM), the TSM API and Backup/Archive Client version 5.3 or later should be installed. Microsoft Internet Explorer 6.0 or later. Adobe Reader 8 or later to view PDF guides. |
LiteSpeed has been tested on Dell DR, EMC Data Domain, and ExaGrid storage appliances.
LiteSpeed has been tested and is certified to work under VMware and Hyper-V environments.
For information about registering LiteSpeed and for upgrade instructions, please see the LiteSpeed Installation Guide.
Note that from LiteSpeed 8.5 the default install file path has changed. On upgrade the install file path will not change automatically. You can change the file path during the upgrade process: Browse "Folder name".
If receiving the message "The version of the <RepositoryDatabaseName> on server <ServerName> is greater than the version of this release of LiteSpeed for SQL Server", please see the online Help topic "Upgrade Repositories". The message is an indication that the statistics agent on the older server does not match the newer version of LiteSpeed and must be upgraded.
In addition, there are special considerations if you are upgrading from LiteSpeed 4.x. Review the following before upgrading from LiteSpeed 4.x to LiteSpeed 5.0 or later.
LiteSpeed 5.x and later do not support SSMS plug-in functionality. However, the LiteSpeed UI Console allows you to read SSMS plug-in maintenance plans and upgrade them to SSIS LiteSpeed maintenance plans.
There are two ways to remove old backup files for maintenance plans: the 'Clean up maintenance plans' task and the 'Remove files older than' option in the 'Back Up Database' task. The 'Remove files older than' option removes both LiteSpeed 4.8 and LiteSpeed 5.x/6.x backup files for legacy plans. However, for SSIS maintenance plans it only removes LiteSpeed 5.x/6.x backup files. The 'Clean up maintenance plans' task removes LiteSpeed 4.8 and LiteSpeed 5.x/6.x backup files.
The SQL Server versions supported for log shipping depend upon the LiteSpeed release:
| SQL Server | 4.8 | 5.0 | 5.0.1 | 5.0.2 | 5.1.0–6.5.1 | 6.5.2 | 7.x | 8.0–8.6.0 | 8.6.1-8.8 |
|---|---|---|---|---|---|---|---|---|---|
| 2005 | • | • | • | • | • | • | • | • | |
| 2008 / R2 | • | • | • | • | • | • | • | • | |
| 2012 | • | • | • | • | |||||
| 2014 | • | • | • | ||||||
| 2016 | • | • | |||||||
| 2017 | • |
For existing customers:
For trial customers:
Double-click on the appropriate installer (.msi file) and follow the on-screen directions.
See the LiteSpeedInstallation Guide for full details on installing LiteSpeed. The Installation Guide is located on the product web site and the Quest Support Portal.
Note: It is required that .Net 4.5 is installed before installing LiteSpeed Console and LiteSpeed Core Cloud Components.
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Feedback 이용 약관 개인정보 보호정책 Cookie Preference Center
