지금 지원 담당자와 채팅
지원 담당자와 채팅

DR Series Software 4.0.4 - Command Line Reference Guide

Introduction to the DR Series System Command Line Reference Guide Introducing the DR Series system Managing the DR Series system
Alerts Commands Authenticate Commands Network
Network Command Usage network --show network --delete network --restart network --setdhcp network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>] network --create_bond network --create_eth network --add_member network --setdns [--suffix <dns suffix>] [--primary <IPv4/IPv6 address>] [--secondary <IPv4/IPv6 address>] network --setbonding --bondif <bondN> [--mode <ALB | 802.3ad>] [--mtu <supported MTU range 512 - 9000>] network --update network --factory_reset network --host network --route network --nslookup --destination <ip address | hostname> network --traceroute --destination <ip address | hostname> network --ping --destination <ip address | hostname> [--tries <number>] [--size <number>] [--interface <bondN | ethN>] network --blink network --enable network --disable=GUID-925B2D94-D583-4966-ABDE-8E3FE14B59FC=1=en-us= network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [--clients] [--port_mapper] [--network_config] [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bondN | ethN>] network --troubleshoot --gateway --interface <bondN | ethN> network --troubleshoot [--show_active <NFS| CIFS|OST|NDMP|ISCSI|RDS>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>] [--file_size <0 - 100>] [--stop] [--host <ip address list>] [--interface <bondN | ethN>] network --tcpdump [--pkt_size <128 - 32768>] network --tcpdump [--file_size <0 - 100>] network --tcpdump [--host <ip address list>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] network --iperf_client --server <ip address | hostname> [--port <number>] [--window_size <num bytes [KB/MB]>] [--interval <num seconds>] [--time <num seconds>] network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>] network --help
OST RDA Stats Storage Group commands System
System Command Usage system --show [--config] system --show [--hardware] system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>] system --show [--storage] system --show [--license] [--verbose] system --show [--ntp] system --show [--version] system --show [--timezones [Region]] system --show [--upgradefile] system --show [--upgradehistory] system --show [--marker] system --show [--replication_traffic] system --show [--opdup_traffic] system --show [--backup_traffic] system --show [--mgmt_traffic] system --init system --init --secure_erase <1–pass/3-passes/7-passes> system --reboot system --shutdown system --upgrade system --license [--validate] [--add] system --setname --name <node_name> system --setdate [--date <date>] [--timezone <Region/Zone>] system --setntp [--add <server name>] system --setntp [--delete <server name>] system --setntp [--enable] system --setntp [--disable] system --setntp [--adjust_time] system --hybrid_replication [--enable][--disable][--status] system --rdairgap [--enable][--disable][--set_retention_period <0 days to 365 days>][--get_retention_period][--open][--close][--status] system --rdairgap_schedule [--start_time <HH:MM>][--end_time <HH:MM>][--remove] system --setlogin system --telnet [--enable | --disable] system --datacheck --enable system --datacheck --disable system --datacheck --throttle system --marker [--enable] [--disable] system --verify_on_read [--enable] [--disable] system --add_storage --enclosure <service tag> system --storage [--set_usage_alert <70% - 90%>] system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>] system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num> system --mgmt_traffic system --backup_traffic system --replication_traffic system --opdup_traffic system --help
User Virtual Machine
Maintaining the DR Series System
Diagnostics Maintenance
Maintenance Command Usage maintenance --filesystem [--start_scan [verify_data | verify_rda_metadata | verify_metadata] [--storage_group <name>] maintenance --filesystem [--stop_scan] maintenance --filesystem [--scan_status] maintenance --filesystem [--scan_report [verbose]] maintenance --filesystem [--repair_status [verbose]] maintenance --filesystem [--repair_history [verbose]] maintenance --filesystem [--scan_restart [verify_data | verify_rda_metadata | verify_metadata]] maintenance --filesystem [--repair_now] maintenance --filesystem [--reclaim_space] maintenance --filesystem [--clear_quarantine] maintenance --filesystem [--clear_quarantine] maintenance --filesystem --show_throughput maintenance --configuration [--backup] maintenance --configuration [--restore] maintenance --configuration [--reinit_dictionary] maintenance --configuration [--reset_web_certificate] maintenance --configuration --enable_sha256_web_certificate maintenance --hardware [--reinit_nvram] maintenance --hardware [--restore_hw_db] maintenance --hardware [--motherboard_replaced] maintenance --disk [--make_standby [slot num]] [--type <internal | external-<num> | service tag>] --clear_foreign] maintenance --remote_access [--show] maintenance --remote_access [--enable] maintenance --remote_access [--racreset] maintenance --remote_access [--static_ip] [--ip <IPv4/IPv6 address>] [--netmask <netmask>] [--gateway <IPv4/IPv6 address>] [--device <lom1|lom2|lom3|lom4>] maintenance --remote access [--disable] maintenance --vdisk --check_consistency --type <boot|internal|external> [--service_tag <service tag>] maintenance --help
Managing DR Series System Storage Operations
System Storage Operation Commands Connection Container VTL NDMP iSCSI FC Replication Seed Schedule
Data Integrity Checking Additional Linux Commands About us

iscsi --show [--user]

Description

This command displays iSCSI information including the iSCSI CHAP user name in the current DR system.

Syntax

iscsi --show --user

Result

user : iscsi_user

Syntax

iscsi --show

Result

Target 1 : iqn.1984-05.com.dell:dr2000v.3184868.vtl100.10
    System information:
        Driver: iscsi
        State: ready
    I_T nexus information:
    LUN information:
        LUN: 0
            Type: controller (Controller)
            Backing store path: None
        LUN: 1
            Type: passthrough (L700)
            Backing store path: /dev/sg12
        LUN: 2
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg2
        LUN: 3
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg8
        LUN: 4
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg11
        LUN: 5
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg4
        LUN: 6
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg5
        LUN: 7
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg6
        LUN: 8
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg10
        LUN: 9
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg3
        LUN: 10
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg9
        LUN: 11
            Type: passthrough ( ULT3580-TD4)
            Backing store path: /dev/sg7
    Account information:
        iscsi_user
    Target 1 ACL information:         10.250.249.221
administrator@satyan-vm1 >

iscsi --setpassword

Description

This command sets the password for the iSCSI CHAP user.

Syntax

iscsi --setpassword

Result

WARNING: All existing iSCSI sessions will be terminated!
Do you want to continue? (yes/no) [n]? yes
Enter new CHAP password:
Re-type CHAP password:
administrator@test-vm1 >

iscsi --sessions

Description

This command displays the current iSCSI sessions in the current DR system.

Syntax

iscsi --sessions

Result

iSCSI client(s) information:
Container: test_vtl
 Target IQN: iqn.1984-05.com.dell:dr4000.7355836.test_vtl.10
  Initiators Connected: iqn.1991-05.com.microsoft:win-t16n70kqii4.testad.test.local

iscsi --help

Description

Displays the list of iSCSI-related command options that can be used as a reference when using the DR Series system CLI.

Syntax

iscsi --help

Result

Usage:
        iscsi --show [--user]

        iscsi --setpassword
        iscsi --sessions
        iscsi --help

   iscsi <command> <command-arguments>
   <command> can be one of:
                --show          Displays command specific information.
                --setpassword   Set CHAP password
                --sessions      Show iSCSI sessions

For command-specific help, please type iscsi --help <command>
        eg:
            iscsi --help show
관련 문서

The document was helpful.

평가 결과 선택

I easily found the information I needed.

평가 결과 선택