1. |
On the left navigation pane, click Settings > Control Panel to display the Control Panel, then click General Settings to display the General Settings page. |
2. |
3. |
The Boot Manager timeout for all PXE boots from the appliance is changed.
When you boot a device from the hard drive, you can specify how you want the device to boot.
Both local and chain boot methods are available, but the chain boot method is recommended.
1. |
On the left navigation pane, click Settings > Control Panel to display the Control Panel, then click General Settings to display the General Settings page. |
2. |
Under PXE Options, click Local Hard Disk Boot Method (BIOS), and select the boot method for BIOS devices. |
◦ |
Chain Boot: Select this option if you want to use iPXE to chain-boot the device to its hard drive. |
◦ |
Local Boot: Select this option if you want to use built-in iPXE commands to do a boot from the hard drive. |
3. |
Also under PXE Options, click Local Hard Disk Boot Method (UEFI), and select the boot method for UEFI devices. |
◦ |
Chain Boot: Select this option if you want to run a UEFI script to load the Windows UEFI boot manager. |
◦ |
Local Boot: Select this option if you want to use built-in iPXE commands to do a boot from the hard drive. |
4. |
The KBE Main Menu, which loads on target devices after you network boot a device in to the appliance, provides a Recovery menu option. You can modify or replace files, and edit the registry to boot unresponsive devices.
You can restore corrupted devices or devices that cannot boot from its hard drive.
1. |
3. |
© ALL RIGHTS RESERVED. 이용 약관 개인정보 보호정책 Cookie Preference Center