サポートと今すぐチャット
サポートとのチャット

Rapid Recovery 6.3 - Command Line and Scripting Reference Guide

Rapid Recovery overview and system requirements Command Line Management Utility PowerShell Module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-CredentialsVaultAccount AddEncryptionKeytoProtectedMachine Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-ActiveBlockMapping Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-EsxServerProtectionRules Edit-ExcludedFilesAndFolders Edit-HyperVClusterProtectionRules Edit-HyperVServerProtectionRules Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-CredentialsVaultAccounts Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstanceMetadata Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-ProtectionRules Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes Join-CredentialsVaultAccount New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Open-DvmRepository Push-Replication Push-Rollup Remove-Agent Remove-CredentialsVaultAccount Remove-EncryptionKey Remove-EsxAutoProtectObjects Remove-EsxVirtualMachines Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Scheduler Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-CredentialsVaultAccount Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-BackupSettings Start-ChecksumCheck Start-ConfigureAgentMigration Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-RestoreSettings Start-RestoreUrc Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Update-Repository
Localization Qualifiers
Scripting

CheckRepository

You can use the CheckRepository command to verify the integrity of an existing DVM repository created in AppAssure Core or Rapid Recovery Core.

Usage

The usage for the command is as follows: 

/checkrepository -repository [repository name] | -all [check all repositories] -core [host name] -user [user name] -password [password] name] -force
Command Options

The following table describes the options available for the CheckRepository command:

Table 6: CheckRepository command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-all
 Optional. This option checks all DVM repositories associated with the Core. 
-repository
 The name of the DVM repository. 
-force
 Optional. This option performs the check without your confirmation.
Example:

Start checking the DVM repository: 

>cmdutil /checkrepository -repository "Repository1" -core 10.10.10.10 -user administrator -password 23WE@#$sdd

ConfigureAgentMigration

This command lets you move the recovery points of a protected machine from an AppAssure repository to a Rapid Recovery repository. This command also reassigns the protected machine to the new repository.

Usage

The usage for the command is as follows: 

/configureagentmigration -core [host name] -user [user name] -password [password] name] -agentname [name of the protected machine] -targetrepository [repository name] -lastrecoverypointdate [MM/dd/yyyy HH:mm:ss tt] -asnightlyjob
Command Options

The following table describes the options available for the ConfigureAgentMigration command:

Table 7: ConfigureAgentMigration command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-agentname
 The name of the protect machine you want to migrate. 
-targetrepositoryname
 The name of the repository to which you want to migrate the protected machine. 
-lastrecoverypointdate
 Optional. The date and time of the last recovery point you want to migrate. Migration will not occur for recovery points older than the specified date and time. If you do not specify a date and time, then all recovery points for the protected machine will migrate. 
-asnightlyjob
 Optional. Use this option if you want the command to occur as a nightly job rather than during peak business hours.
Example:

Migrate the protected machine from an AppAssure repository to a Rapid Recovery repository: 

>cmdutil /configureagentmigration -agentname localhost -targetrepositoryname repository1 -lastRecoveryPointDate "10/15/2014 3:19:10 PM" -asNightlyJob

CreateArchiveRepository

When you create an archive repository, you create a destination for the contents of a scheduled archive. This feature lets you mount an archived recovery point and restore a machine without importing the archive.

Usage

The usage for the command is as follows: 

/createarchiverepository -core [host name] -user [user name] -password [password] name] -name [archive repository name] -path [path to the archive] -archiveusernamme [network user name] -archivepassword [network password] -cloudaccountname [name of the cloud account] -cloudcontainer [name of the cloud container]
Command Options

The following table describes the options available for the CreateArchiveRepository command:

Table 8: CreateArchiveRepository command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-name
 Required. The name of the archive repository. 
-path
 The path to the existing archive. It can be a local, network, or cloud location. For example: d:\work\archive or \\servername\sharename. 
-archiveusername
 Optional. This option is the login to the remote machine. It is required for a network path only. 
-archivepassword
 Optional. This option is the password for the remote machine. It is only required for a network path only. 
-cloudaccountname
 Optional. This option is the display name for an existing cloud account. It is required for a cloud path only. 
-cloudcontainer
 Optional. The cloud container is where the archive is located. It is required for a cloud path only.
Examples:

Create an archive repository with the name "NewArchive:" 

>cmdutil /createarchiverepository -name NewArchive -core 10.10.10.10 -user administrator -password 23WE@#$sdd -path d:\work\archive

Additionally, if an archive contains more than one location, then the command should include paths for all of the segments ordered from 1 to N, where N equals the number of segments.

Create an archive repository with the name "NewSegmentArchive:" 

>cmdutil /createarchiverepository -name NewSegmentArchive -path1 \\RemmoteServer1\Share\Archive\Segment1 - archiveusername1 Administrator -archivepassword1 23WE@#$sdd -path2 Archives\NewSegment -cloudcontainer2 ArchiveContainer -cloudaccountname AmazonS3Local - path3 d:\work\archive\Third

CreateBootCD

This command lets you create a bare metal restore (BMR) boot CD without using the Rapid Recovery Core Console.

Usage

The usage for the command is as follows: 

/createbootcd -ip [IP address] -mask [mask] -defaultgateway [defaultgateway] -dnsserver [dnsserver] -vncpassword [vncpassword] -vncport [vncport] -isofilepath [destination for the boot image]
Command Options

The following table describes the options available for the CreateBootCD command:

Table 9: CreateBootCD command options
Option Description 
-?
 Display this help message. 
-ip
 Optional. This option specifies the IP address of the target BMR machine. By default, it generates automatically. 
-mask
 Optional. This option specifies the subnet mask of the target BMR machine. By default, it generates automatically. 
-defaultgateway
 Optional. This option specifies the default gateway of the target BMR machine. By default, it generates automatically. 
-dnsserver
 Optional. This option specifies the DNS server for the target BMR machine. By default, it generates automatically. 
-vncpassword
 Optional. This option specifies the user password for an existing UltraVNC account. By default, this option is empty. 
-vncport
 Optional. This option specifies the port to use for UltraVNC. You can change it only if you used the -vncpassword option. By default, the port is 5900. 
-isofilepath
 Optional. This option specifies the patch to the boot CD file. The default path is C:\ProgramData\AppRecovery\Boot CDs.
Example:

Create a boot CD: 

>cmdutil /createbootcd -ip 192.168.20.188 -mask 255.255.255.0 -defaultgateway 192.168.20.2 -dnsserver 192.168.20.2 -isofilepath D:\bcd\newbcd3.iso
関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択