サポートと今すぐチャット
サポートとのチャット

Rapid Recovery 6.3 - Command Line and Scripting Reference Guide

Rapid Recovery overview and system requirements Command Line Management Utility PowerShell Module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-CredentialsVaultAccount AddEncryptionKeytoProtectedMachine Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-ActiveBlockMapping Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-EsxServerProtectionRules Edit-ExcludedFilesAndFolders Edit-HyperVClusterProtectionRules Edit-HyperVServerProtectionRules Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-CredentialsVaultAccounts Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstanceMetadata Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-ProtectionRules Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes Join-CredentialsVaultAccount New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Open-DvmRepository Push-Replication Push-Rollup Remove-Agent Remove-CredentialsVaultAccount Remove-EncryptionKey Remove-EsxAutoProtectObjects Remove-EsxVirtualMachines Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Scheduler Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-CredentialsVaultAccount Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-BackupSettings Start-ChecksumCheck Start-ConfigureAgentMigration Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-RestoreSettings Start-RestoreUrc Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Update-Repository
Localization Qualifiers
Scripting

Add-HyperVClusterSharedVirtualDisks

The Add-HyperVClusterSharedVirtualDisks cmdlet lets you add shared Hyper-V virtual disks under the protection of a Core.

Usage

The usage for the command is as follows:

Add-HyperVClusterSharedVirtualDisks -core [host name] -user [user name] -password [password] -repository [name] -shareddisks [shared virtual disks name or path collection | all]
Command Options

The following table describes the options available for the Add-HyperVClusterSharedVirtualDisks command:

Table 84: Add-HyperVClusterSharedVirtualDisks command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-repository
Required. The name of the repository that is associated with the Core that you want to use to store the data of the virtual machine.
Note: You must enclose the name in double quotes.
-protectedserver
Use this option to edit the shared virtual disks for a specific protected machine.
-shareddisks
A list of shared disks each separate by a comma.
Examples:

Protect all of the shared virtual disks on a cluster:

>Add-HyperVClusterSharedVirtualDisks -protectedserver "HV-2012R2" -repository "Repository_10.10.55.133"  -shareddisks "all"

Add-HyperVClusterVirtualMachines

The Add-HyperVClusterVirtualMachines cmdlet lets you add specific virtual machines (VMs) from a Hyper-V cluster under the protection of a Core.

Usage

The usage for the command is as follows:

Add-HyperVClusterVirtualMachines -core [host name] -user [user name] -password [password] -repository [name] -protectedserver [name | IP address] -virtualmachines [virtual machines collection | all]
Command Options

The following table describes the options available for the Add-HyperVClusterVirtualMachines command:

Table 85: Add-HyperVClusterVirtualMachines command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-repository
Required. The name of the repository that is associated with the Core that you want to use to store the data of the virtual machine.
Note: You must enclose the name in double quotes.
-protectedserver
Use this option to protect virtual machines.
-virtualmachines
A list of the virtual machines that you want to protect, each separated by a comma. The name of the VM must be enclosed in double quotes.
Examples:

Add specific VMs of a Hyper-V cluster under protection by the Core:

>Add-HyperVClusterVirtualMachines -repository "Repository 1" -protectedserver hvcluster -virtualmachines "Win8x64-gen1", "Win2012x64-gen2"

Add-HyperVVirtualMachines

The Add-HyperVVirtualMachines cmdlet lets you add specific virtual machines (VMs) from a Hyper-V cluster under the protection of a Core.

Usage

The usage for the command is as follows:

Add-HyperVVirtualMachines -core [host name] -user [user name] -password [password] -repository [name] -protectedserver [name | IP address] -virtualmachines [virtual machines collection | all]
Command Options

The following table describes the options available for the Add-HyperVVirtualMachines command:

Table 86: Add-HyperVVirtualMachines command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-repository
Required. The name of the repository that is associated with the Core that you want to use to store the data of the virtual machine.
Note: You must enclose the name in double quotes.
-protectedserver
Use this option to edit Hyper-V objects for a specific virtual machine.
-virtualmachines
A list of the virtual machines that you want to protect, each separated by a comma. The name of the VM must be enclosed in double quotes.
Examples:

Add specific VMs of a Hyper-V cluster under protection by the Core:

>Add-HyperVVirtualMachines -repository "Repository 1" -protectedserver HVServer1 -virtualmachines "Win8x64-gen1", "Win2012x64-gen2"

Disable-HyperVAutoProtection

The Disable-HyperVAutoProtection cmdlet lets you disable the auto-protection feature, which automatically protects new virtual machines (VMs), on a Hyper-V host.

Usage

The usage for the command is as follows:

Disable-HyperVAutoProtection -core [host name] -user [user name] -password [password] -protectedserver [name | IP address]
Command Options

The following table describes the options available for the Disable-HyperVAutoProtection command:

Table 87: Disable-HyperVAutoProtection command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-protectedserver
The display name, host name, or IP address of the protected Hyper-V server.
Examples:

Disable auto protection of new virtual machines on the specified Hyper-V host:

>Disable-HyperVAutoProtection -protectedserver "10.10.1.1"
関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択