Tchater maintenant avec le support
Tchattez avec un ingénieur du support

Rapid Recovery 6.3 - Command Line and Scripting Reference Guide

Rapid Recovery overview and system requirements Command Line Management Utility PowerShell Module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-CredentialsVaultAccount AddEncryptionKeytoProtectedMachine Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-ActiveBlockMapping Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-EsxServerProtectionRules Edit-ExcludedFilesAndFolders Edit-HyperVClusterProtectionRules Edit-HyperVServerProtectionRules Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-CredentialsVaultAccounts Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstanceMetadata Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-ProtectionRules Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes Join-CredentialsVaultAccount New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Open-DvmRepository Push-Replication Push-Rollup Remove-Agent Remove-CredentialsVaultAccount Remove-EncryptionKey Remove-EsxAutoProtectObjects Remove-EsxVirtualMachines Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Scheduler Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-CredentialsVaultAccount Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-BackupSettings Start-ChecksumCheck Start-ConfigureAgentMigration Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-RestoreSettings Start-RestoreUrc Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Update-Repository
Localization Qualifiers
Scripting

Start-RestoreAgent

The Start-RestoreAgent cmdlet lets you restore a protected machine or volume from a specific Rapid Recovery recovery point.

Usage

The usage for the command is as follows: 

Start-RestoreAgent -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [name] -targetvolume [volume name] -forcedismount -autorestart
Command Options

The following table describes the options available for the Start-RestoreAgent command:

Table 200: Start-RestoreAgent command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-protectedserver
 The name or IP address of the server you want to restore. 
-rpn
 The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps. 
-volumes
 The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all. 
-targetmacchine
 The name of the machine to which you want to restore the protected machine. 
-targetvolume
 The name or ID of the volume to which you want to restore the machine. 
-forcedismount
 Optional. Use this option to force the dismount of the database on demand. 
-autorestart
 Optional. Use this command if restarting an Exchange Server machine is necessary.
Examples:

Restore a machine to a protected machine with the IP address 192.168.20.130, including the force database dismount option: 

>Start-RestoreAgent -protectedserver 192.168.20.130 -rpn 259 -volumes "F:" "E:" "C:" -targetmachine 192.168.20.174 -targetvolume "E:" "G:" "F:" -forcedismount

Start-RestoreArchive

Businesses often use long-term storage to archive both compliant and non-compliant data. The archive feature in Rapid Recovery is used to support the extended retention for compliant and non-compliant data. The administrator can save an archive on the local storage or network location by specifying the -Path command and credentials.

Usage

The usage for the command is as follows: 

Start-RestoreArchive -core [host name] -user [login] -password [password] -all | -protectedserver [name | IP address | "[name1 | IP address1]" "[name2 | IP address2]"] -repository [name] -archiveusername [name] -archivepassword [password] -path [location]  -cloudaccountname [name] -cloudcontainer [name]
Command Options

The following table describes the options available for the Start-RestoreArchive command:

Table 201: Start-RestoreArchive command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-all
 Archive recovery points for all protected machines. 
-protectedserver
 The protected machine with recovery points that you want to archive. You can specify multiple machine names enclosed in double quotes and separated by commas. 
-repository
 The name of the repository where you want to place restored recovery points. You must enclose the name in double quotes; for example, "Repository1." 
-archiveusername
 Optional. The user name for logging in to the remote machine. It is required for a network path only. 
-archivepassword
 Optional. The password for logging in to the remote machine. It is required for a network path only. 
-path
 The path to where to save the archived data. For example:
  • Local machine: "d:\work\archive"
  • Network path: "\\servername\sharename"
  • Folder in a cloud account: "Folder Name"
Note: The number of symbols should not be greater than 100 for local and network locations, and should not be greater than 150 for a cloud location. 
-cloudaccountname

Optional. Use only for cloud archiving. The name of the cloud account where you want to save the archive. 

-cloudcontainer

Optional. Use only for cloud archiving. The name of the cloud container in the chosen cloud account, where the archive will be saved. When you use this option, you should also specify the "-cloudaccountname" parameter. 

-manifestcore
 Optional. Specify the Core that you want to use from the manifest of the restored archive.
Examples:

Archive all recovery points for all machines on the Core and store them on the local machine: 

>Start-RestoreArchive -path D:\work\archive -startdate 'Example 04/30/2012' –all

Start-RestoreSettings

The Start-RestoreSettings cmdlet lets you restore the Core configuration from a backup.

Usage

The usage for the command is as follows: 

Start-RestoreSettings -localpath [local path] -restorerepositories
Command Options

The following table describes the options available for the Start-RestoreSettings command:

Table 202: Start-RestoreSettings command options
Option Description 
-?
 Display this help message. 
-localpath
 The path of the configuration backup.
-restorerepositories
 Optional. Restores repositories as well as the configuration.
Examples:

Restore the settings of only the Core: 

>Start-RestoreSettings -localpath D:\work\archive

Restore the settings of the Core with repositories: 

>Start-RestoreSettings -localpath D:\work\archive -restorerepositories

Start-RestoreUrc

The Start-RestoreUrc cmdlet lets you restore a protected machine or volume from a specific recovery point to a bare-metal machine using the Universal Recovery Console (URC).

Usage

The usage for the command is as follows: 

Start-RestoreUrc -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [IP address] -urcpassword [password from the URC] -targetdisk [disk number | all]
Command Options

The following table describes the options available for the Start-RestoreUrc command:

Table 203: Start-RestoreUrc command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-protectedserver
 The name or IP address of the server you want to which you want to restore the URC. 
-rpn
 The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps. 
-volumes
 The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all. 
-targetmacchine
 The name of the machine to which you want to restore the protected machine. 
-urcpassword
 The authentication key from the URC. 
-targetdisk
 The numbers of the disks on which you want to restore the machine. To select all disks from the machine using the URC, use -targetdisk all.
Examples:

Restore a machine to disks 0 and 1 of the machine using the URC, when the IP address for the URC machine is 192.168.20.175: 

>Start-RestoreUrc -protectedserver 192.168.20.130 -rpn 259 -volumes "C:" "E:" -targetmachine 192.168.20.175 -urcpassword ******** -targetdisk 0 1
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation