Tchater maintenant avec le support
Tchattez avec un ingénieur du support

vRanger 7.8 - Integration Guide for NetVault SmartDisk

Getting started Understanding NetVault SmartDisk Planning your NetVault SmartDisk deployment Installing vRanger Installing NetVault SmartDisk Configuring NetVault SmartDisk Monitoring NetVault SmartDisk About us

Enabling or updating authentication for WebDAV access

Previous Next



config --add|--update --webdav <port> [--block-size <bytes>]
[‑‑preferred-address <address>] [--credentials]
Replace <port#> with the port that you are using.
3
When the Username prompt appears, enter the user name that should be used for access, and press Enter.
4
When the Password prompt appears, enter the password associated with the specified user name, press Enter, enter the password again when the Confirm Password prompt appears, and press Enter again.

Verifying that the client ports are open

Previous Next



In the following examples, replace <port#> with the applicable port number, and replace <hostName> with the IP address of the machine on which NetVault SmartDisk is installed.
http://<localhost>:<port#>/proc/dedupe/stats.stnz
http://<hostName>:<port#>/proc/dedupe/stats.stnz

NetVault SmartDisk CLI: an overview

Previous Next


Configuring NetVault SmartDisk > NetVault SmartDisk CLI: an overview

IMPORTANT: If you are using NetVault SmartDisk on Windows Server® 2008, Windows® Vista, or Windows 7, use a Run as Administrator command prompt to run the CLI commands. If you use a standard command prompt, you might receive an Access Denied message, even if you have administrator privileges.
1
Click Start > Run.
2
In the Run dialog box, type cmd, and press Ctrl+Shift+Enter.
The Administrator Command Prompt appears.

Accessing command help

Previous Next



2
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation