external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Creates a schedule for the backup creation operation you want to perform on a particular computer collection.
New-RMADSchedule [-Once] -StartDate <DateTime> [-MinutesDuration <UInt32>] [-MinutesInterval <UInt32>]
[-InformationAction <ActionPreference>] [-InformationVariable <String>] [<CommonParameters>]
New-RMADSchedule [-Daily] -DaysInterval <Int32> -StartDate <DateTime> [-EndDate <DateTime>]
[-MinutesDuration <UInt32>] [-MinutesInterval <UInt32>] [-InformationAction <ActionPreference>]
[-InformationVariable <String>] [<CommonParameters>]
New-RMADSchedule [-Weekly] -WeeksInterval <Int32> -DaysOfWeek <DaysOfTheWeek> -StartDate <DateTime>
[-EndDate <DateTime>] [-MinutesDuration <UInt32>] [-MinutesInterval <UInt32>]
[-InformationAction <ActionPreference>] [-InformationVariable <String>] [<CommonParameters>]
New-RMADSchedule [-MonthlyDate] -Day <Int32> [-Months <Months>] -StartDate <DateTime> [-EndDate <DateTime>]
[-MinutesDuration <UInt32>] [-MinutesInterval <UInt32>] [-InformationAction <ActionPreference>]
[-InformationVariable <String>] [<CommonParameters>]
New-RMADSchedule [-MonthlyDOW] [-DaysOfWeek <DaysOfTheWeek>] [-Months <Months>] -Week <WhichWeek>
-StartDate <DateTime> [-EndDate <DateTime>] [-MinutesDuration <UInt32>] [-MinutesInterval <UInt32>]
[-InformationAction <ActionPreference>] [-InformationVariable <String>] [<CommonParameters>]
Creates a schedule to perform the backup creation operation a particular computer collection.
You can use the parameters of this cmdlet to set a recurring or non-recurring schedule for the backup creation operation.
PS C:\> New-RMADSchedule -Once -StartDate "2/20/2008 1:00"
Runs the backup creation operation at 1:00 a.m.
on the 20th February 2008.
PS C:\> New-RMADSchedule -Daily -StartDate "2/20/2008 1:00" -DaysInterval 3
Runs the backup creation operation every 3 days, starting from 1:00 a.m.
on the 20th February 2008.
PS C:\> New-RMADSchedule -Weekly -StartDate "2/20/2008 1:00" -WeeksInterval 2 -DaysOfWeek Monday,Friday
Runs the backup creation operation on Monday and Friday of every second week, starting from 1:00 a.m.
on the 20th February 2008.
PS C:\> New-RMADSchedule -MonthlyDate -StartDate "2/20/2008 1:00" -Day 1
Runs the backup creation operation on every first day of each month (the Months parameter is omitted, therefore the backup creation operation is invoked each month), starting from 1:00 a.m.
on the 20th February 2008.
PS C:\> New-RMADSchedule -MonthlyDOW -StartDate "2/20/2008 1:00" -DaysOfWeek 1,5 -Week 1
Runs the backup creation operation on every first Monday and Friday of each month, starting from 1:00 a.m.
on the 20th February 2008.
Runs the backup creation operation only once.
Type: SwitchParameter
Parameter Sets: Once
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the date when the backup creation operation schedule comes into effect.
Type: DateTime
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the time period (in minutes) during which you want to repeatedly run (invoke) the backup creation operation.
To set the time interval between invocations of the backup creation operation, use the MinutesInterval parameter.
Type: UInt32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the time interval (in minutes) between invocations of the backup creation operation.
To set the time period during which you want to repeatedly run (invoke) the backup creation operation, use the MinutesDuration parameter.
Type: UInt32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Runs the backup creation operation on a daily basis.
Type: SwitchParameter
Parameter Sets: Daily
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Sets an interval (in number of days) between invocations of the backup creation operation.
Type: Int32
Parameter Sets: Daily
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the date when the backup creation operation schedule expires.
Type: DateTime
Parameter Sets: Daily, Weekly, MonthlyDate, MonthlyDOW
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Runs the backup creation operation on a weekly basis.
Type: SwitchParameter
Parameter Sets: Weekly
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Sets an interval (in number of weeks) between invocations of the backup creation operation.
Type: Int32
Parameter Sets: Weekly
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Runs the backup creation operation on particular days of week.
To set the weeks when you want to run the backup creation operation, use the Weekly or MonthlyDOW parameter.
Type: DaysOfTheWeek
Parameter Sets: Weekly
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Type: DaysOfTheWeek
Parameter Sets: MonthlyDOW
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Runs the backup creation operation on particular day of month.
To set the months and day of month when you want to run the backup creation operation, use the Months and Day parameters respectively.
Type: SwitchParameter
Parameter Sets: MonthlyDate
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Sets the day of the month when you want to run the backup creation operation.
Type: Int32
Parameter Sets: MonthlyDate
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Sets the months when you want to run the backup creation operation.
Type: Months
Parameter Sets: MonthlyDate, MonthlyDOW
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Runs the backup creation operation on particular days of week in particular months.
To set the months, weeks, and days of week, use the Months, Week, and DaysOfWeek parameters respectively.
Type: SwitchParameter
Parameter Sets: MonthlyDOW
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Sets the week of the month when you want to run the backup creation operation.
This parameter accepts the following values:* 1.
Specifies the first week of the month.
Type: WhichWeek
Parameter Sets: MonthlyDOW
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: ActionPreference
Parameter Sets: (All)
Aliases: infa
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: String
Parameter Sets: (All)
Aliases: iv
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Enables storage server hardening.
Protect-RMADSecureStorageServer [-IgnoreReadOnly] [-Name] <String> [-WhatIf] [-Confirm] [<CommonParameters>]
Protect-RMADSecureStorageServer [-IgnoreReadOnly] [-Server] <StorageServer> [-WhatIf] [-Confirm]
[<CommonParameters>]
Enables storage server hardening.
PS C:\> Get-RMADStorageServer | Protect-RMADSecureStorageServer
Enables hardening on all registered secure storage servers.
PS C:\> Protect-RMADSecureStorageServer -Name "storage.srv"
Enables hardening on the specified storage server.
Prompts you for confirmation before running the cmdlet.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Allows you to perform the action in a console currently performing full replication.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the name of the secure storage server.
Type: String
Parameter Sets: Name
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
Specifies the secure storage server. Use Get-RMADStorageServer to get a list of all secure storage servers.
Type: StorageServer
Parameter Sets: Server
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
Shows what would happen if the cmdlet runs.
The cmdlet is not run.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Publishes security check information for a specified backup.
Publish-RMADBackupSecurityStatus -BackupGuid <Guid[]> -SecurityStatus <BackupSecurityStatus>
[-InformationAction <ActionPreference>] [-InformationVariable <String>] [<CommonParameters>]
Saves security check information for a specified backup registered with Recovery Manager for Active Directory.
PS C:\> $bkf = (Get-RMADBackup -ComputerName DC.DomainName.local)[-1]
$status = New-Object -TypeName QuestSoftware.RecoveryManager.AD.PowerShell.BackupSecurityStatus
$status.Summary = "Passed"
$status.Details = "some passed"
$status.CheckDate = Get-Date
Publish-RMADBackupSecurityStatus -BackupGuid $bkf.backupGuid -SecurityStatus $status
Get-RMADBackupSecurityStatus -BackupGuid $bkf.BackupGuid
For troubleshooting only.
This command saves antimalware scan results for a specified backup registered with Recovery Manager for Active Directory.
This is the GUID of the backup for which a user wants to get the antimalware scan results.
Type: Guid[]
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Result information about the security check of a particular backup.
Type: BackupSecurityStatus
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: ActionPreference
Parameter Sets: (All)
Aliases: infa
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: String
Parameter Sets: (All)
Aliases: iv
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Refreshes current information of the secure storage server.
Refresh-RMADStorageServer [-IgnoreReadOnly] -Name <String> [<CommonParameters>]
Refresh-RMADStorageServer [-IgnoreReadOnly] [-Server] <StorageServer> [<CommonParameters>]
Connects to the secure storage server and retrieves the current status (agent state and hardening state).
PS C:\> Get-RMADStorageServer | Refresh-RMADStorageServer
Updates statuses of all registered secure storage servers.
PS C:\> Refresh-RMADStorageServer -Name "storage.srv"
Refreshes the status of the specified secure storage server.
Specifies the secure storage server. Use Get-RMADStorageServer to get a list of all secure storage servers.
Type: StorageServer
Parameter Sets: Server
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
Specifies the name of the secure storage server.
Type: String
Parameter Sets: Name
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
Allows you to perform the action in a console currently performing full replication.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
© ALL RIGHTS RESERVED. Términos de uso Privacidad Cookie Preference Center