Enables one or both Data Check scan options that can be used on a DR Series system. The enable option can be set to all, namespace, or blockmap. You can individually enable namespace or blockmap scan options, or both options using the all scan option (which means that both the namespace and blockmap scan types will be enabled).
NOTE: This example shows all Data Check scan options enabled. To enable only the namespace or only the blockmap scan, use those options respectively in the DR Series system CLI command, for example, --enable --namespace, or --enable --blockmap. |
Disables one or both Data Check scan option types that can be used on a DR Series system. You can individually disable namespace or blockmap scan options, or both options using the all scan option (which means that both the namespace and blockmap scan types will be disabled).
NOTE: This example shows all Data Check scan options being disabled. To disable only the namespace or the blockmap scan, use those options respectively in the DR Series system CLI command, for example, --disable --namespace, or --disable --blockmap. |
Use the Data Check --throttle option to specify the percentage of available DR Series system resources you want to use when running Data Check scans when the other system operations (data ingest, Replication, and Cleaner processes) are idle. The range is between 1 to 100 percent (%), and the default is 50%.
For more information about enabling or disable marker detection settings on a DR Series system, see system --marker [--enable] or system --marker [--disable].
NOTE: To display the current status of the marker detection settings, use the DR Series system CLI command: system --show --marker.
|
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Feedback Términos de uso Privacidad Cookie Preference Center