Chatee ahora con Soporte
Chat con el soporte

Recovery Manager for AD 10.2 - User Guide

Overview Getting started
Permissions required to use Recovery Manager for Active Directory Recovery Manager Console Getting and using help Configuring Windows Firewall Using Computer Collections Managing Recovery Manager for Active Directory configuration Licensing
Backing up data
Permissions required for the Backup operation Managing Backup Agent Using a least-privileged user account to back up data Using Managed Service Accounts Active Directory backups vs Windows System State backups Creating BMR and Active Directory backups Using the Backup Wizard Retrying backup creation Enabling backup encryption Backing up AD LDS (ADAM) Backing up cross-domain group membership Backing up distributed file system (DFS) data Backup scheduling Setting performance options Setting advanced backup options Unpacking backups Using e-mail notification Viewing backup creation results
Restoring data
Getting started with Active Directory recovery Managing deleted or recycled objects Restoring backed up Active Directory components Integration with Change Auditor for Active Directory Using granular online restore Restoring AD LDS (ADAM) Selectively restoring Active Directory object attributes Restoring objects in an application directory partition Restoring object quotas Restoring cross-domain group membership Performing a restore without having administrator privileges Reports about objects and operations Using complete offline restore Offline restore implications Restoring SYSVOL authoritatively Performing a granular restore of SYSVOL Recovering Group Policy Restoring data from third-party backups Using the Extract Wizard Restoring passwords and SID history
Full Replication Consolidating backup registration data Monitoring Recovery Manager for Active Directory Using Management Shell Collecting diagnostic data for technical support Using Recovery Manager for Active Directory web portal Appendices
Frequently asked questions Best practices for using Computer Collections Best practices for creating backups Ports Used by Recovery Manager for Active Directory Backup Wizard Online Restore Wizard Online Restore Wizard for AD LDS (ADAM) Group Policy Restore Wizard Repair Wizard Extract Wizard Technical characteristics Events generated by Recovery Manager for Active Directory Descriptions of PowerShell commands
Add-RMADBackup Add-RMADCollectionItem Add-RMADReplicationConsole Add-RMADStorageServer Backup-RMADCollection Compare-RMADObject Convert-RMADBackup ConvertTo-RMADRecycledObject Create-RMADStorageAgentSetup Expand-RMADBackup Export-RMADBackup Export-RMADSecureStorageBackup Get-RMADBackup Get-RMADBackupAgent Get-RMADBackupInfo Get-RMADBackupObject Get-RMADBackupSecurityStatus Get-RMADCollection Get-RMADCollectionItem Get-RMADDeletedObject Get-RMADGlobalOptions Get-RMADLicenseInfo Get-RMADObject Get-RMADReplicationConsole Get-RMADReplicationSchedule Get-RMADReplicationSession Get-RMADReplicationSessionItem Get-RMADReportObject Get-RMADReportObjectAttributes Get-RMADReportObjectChildren Get-RMADReportSession Get-RMADSession Get-RMADSessionItem Get-RMADSessionItemEvent Get-RMADStorageServer Get-RMADStorageServerHardeningStatus Get-RMADStorageServerRetentionPolicy Import-RMADBackup Install-RMADBackupAgent New-RMADCollection New-RMADSchedule Protect-RMADSecureStorageServer Publish-RMADBackupSecurityStatus Refresh-RMADStorageServer Register-RMADSecureStorageBackups Remove-RMADBackup Remove-RMADBackupAgent Remove-RMADCollection Remove-RMADCollectionItem Remove-RMADReplicationConsole Remove-RMADReplicationSchedule Remove-RMADReplicationSession Remove-RMADStorageServer Remove-RMADUnpackedComponent Rename-RMADCollection Restore-RMADDeletedObject Restore-RMADDomainController Restore-RMADObject Set-RMADCollection Set-RMADGlobalOptions Set-RMADReplicationConsole Set-RMADReplicationSchedule Set-RMADStorageServerRetentionPolicy Start-RMADReplication Start-RMADReportViewer Test-RMADSecureStorageBackup Unprotect-RMADStorageServer Update-RMADBackupAgent Update-RMADLicense

Configuring portal for working with Recovery Manager for Active Directory

To restore Active Directory data, the Recovery Manager Portal relies on unpacked backups created by the Recovery Manager for Active Directory instances deployed in your environment. For this reason, you need to configure the Recovery Manager for Active Directory instances to create unpacked backups for the domain controllers you want. Then, configure the Recovery Manager Portal to work with those instances.

Note that the Recovery Manager Portal can only work with Recovery Manager for Active Directory version 8.6 or higher, so make sure to install or upgrade to that Recovery Manager for Active Directory version.

To configure the Recovery Manager Portal for working with Recovery Manager for Active Directory, complete the following steps:

 

Step 1: Install Recovery Manager Portal Access Service

To access a Recovery Manager for Active Directory instance, the Recovery Manager Portal requires the Recovery Manager Remote API Access service to be installed and running on the Recovery Manager for Active Directory computer. This service enables the following Recovery Manager for Active Directory features: integration with Recovery Manager Portal, full replication of RMAD console, consolidation of backup registration data and support for hybrid environment.

The Recovery Manager Remote API Access service is an optional feature and you must select this component when installing Recovery Manager for Active Directory version 10.1. To check if this service is installed and running, you can use the Services tool (services.msc). If the service is not installed, complete the next steps to install it.

To install the Recovery Manager Remote API Access service
  1. Open the list of installed programs (appwiz.cpl).

  2. In the list of installed programs, locate and select Recovery Manager for Active Directory.

  3. At the top of the list, click Change.

  4. Step through the wizard until you are on the Change, repair, or remove installation page.

  5. Click the Change button, and then select the Recovery Manager Remote API Access feature for installation.

  6. Follow the steps to complete the wizard.

The Quest Recovery Manager Remote API Access service runs under the Local System account by default.

However, you can specify another service account using the Services snap-in or command line.

To change the service account using the Services snap-in
  1. Open the Run dialog, type services.msc and press Enter.

  2. Find Quest Recovery Manager Remote API Access service in the list, and open its Properties.

  3. Switch to the Log On tab.

  4. Choose the This account option, Browse for a user account and specify the password.

  5. Click OK to close the Properties dialog.

  6. Restart the service.

To change the service account using the command line
  1. Start cmd.exe.

  2. Type the following command:

sc config RecoveryMgrPortalAccess obj= "[account]" password= "[password]"

  1. Restart the service:

net stop RecoveryMgrPortalAccess & net start RecoveryMgrPortalAccess

Minimum permission requirements for the service operations
Run the service

Have the Log on as a service permission.

To grant the permission:

  1. Run secpol.msc.

  2. In the Local Security Policy console, select Local Polices | User Rights Assignment | Log on as service.

  3. Right-click Log on as service and select Properties.

  4. Make sure that the target account is in the list or belongs to the groups listed on the Local Security Setting tab.

Connect to the configuration database

Have the Read and Write permissions on RMAD database folder %PROGRAMDATA%\Quest\Recovery Manager for Active Directory.

Write the service log

Have the Read and Write permissions on the folder RMAD log.

Invoke COM Surrogate (64-bit OS)

Have the Local Launch and Local Activation permissions on COM server "COM Surrogate" .

To grant permissions:

  1. Run comexp.msc.

  2. In the Component Services console, click Computer | My Computer | DCOM Config.

  3. Right-click {D023E270-1AB8-4F68-873E-7BD3304DC645} and select Properties.

  4. Go to the Security tab and select Customize under Launch and Activation Permissions and click the Edit button.

  5. Assign Local Launch and Local Activation to the target user.

Register COM at run time

Have the Read and Write permissions for the registry keys "HKEY_CLASSES_ROOT", "HKEY_LOCAL_MACHINE\SOFTWARE\Classes" and "HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes".

Access the backups folder

Have the Read permission on the folder backups.

Access the unpacked backups folder

Have the Modify permission on the folder unpacked backups.

Create Scheduled Tasks when using the Replication feature in the Full mode

Have the Read permission on folder %SystemRoot%\system32\Tasks.

Create Scheduled Tasks when using the Replication feature in the Full mode on Windows Server 2016 and 2019

Be a member of the local Administrators group.

 

Step 2: Configure Recovery Manager for Active Directory

NOTE

If you have already created computer collections, and have unpacked backups, skip this step.

In this step, you need to configure the Recovery Manager for Active Directory instances for working with the Recovery Manager Portal.

To configure a Recovery Manager for Active Directory instance
  1. In each Active Directory domain, choose one domain controller whose backups the Recovery Manager Portal will use for recovery operations.

  2. In the appropriate instance of Recovery Manager for Active Directory, create a separate Computer Collection for each domain controller you have chosen.

  3. Add the domain controllers to their individual Computer Collections.

  4. Configure backup settings for these Computer Collections:

 

Step 3: Add Recovery Manager for Active Directory instances

In the Recovery Manager Portal, add the Recovery Manager for Active Directory instances you have configured in the previous step. By adding the instances, you make the unpacked backups they create available in the Recovery Manager Portal.

To add a Recovery Manager for Active Directory instance
  1. Connect to the Recovery Manager Portal with your Web browser.

    Use the user account under which you installed the Recovery Manager Portal. By default, this account has all necessary permissions to modify the portal configuration.

  2. In the Recovery Manager Portal, open the Configuration tab.

  3. Expand Recovery Manager for Active Directory Instances.

  4. Click the Add instance button.

  5. Use the following options in the dialog box that opens:

    • Computer. Type the fully qualified domain name (FQDN) of the computer that hosts the Recovery Manager for Active Directory instance.

    • Access the computer using. Type the user name and password of the account with which you want to access the specified computer. The account must be a local administrator on the target computer.

  6. When finished, click OK.

 

Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación